LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - Black Base - Amber Lens

Part Number: MCL32ABB

4065 Reviews | 21 Questions

In Stock

$12.97

Retail:$13.75

You Save: 6%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

optronics trailer lights side marker 4l x 2w inch mcl32abb

optronics trailer lights clearance 4l x 2w inch

optronics trailer lights clearance 4l x 2w inch led or side marker light w/ reflex reflector- 3 diodes - black base amber lens

optronics trailer lights side marker non-submersible

optronics trailer lights clearance non-submersible led or side marker light w/ reflex reflector- 3 diodes - black base amber lens

optronics trailer lights side marker non-submersible mcl32abb

Show All (8) Product Images

Show Fewer Product Images

In Use/Installed

0 trailer lights optronics clearance side marker on a vehicle

0 trailer lights optronics non-submersible 4l x 2w inch mcl32abb

0 trailer lights optronics clearance side marker led or light w/ reflex reflector- 3 diodes - black base amber lens

0 trailer lights optronics clearance 4l x 2w inch led or side marker light w/ reflex reflector- 3 diodes - black base amber lens

0 trailer lights optronics side marker 4l x 2w inch mcl32abb

0 trailer lights optronics clearance 4l x 2w inch on a vehicle

Show All (6) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - Black Base - Amber Lens customer photo

Show All (5) Customer Images

Show Fewer Customer Images

Videos

Optronics Rectangular LED Trailer Clearance and Side Marker Light with Reflex Reflector Review

Optronics Trailer Lights - Clearance Lights - MCL32ABB Review

Show All (2) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

Call etrailer.com at 1-800-940-8924 for expert service. We are your Keystone trailer lights experts, and offer a great price. etrailer.com carries a complete line of Optronics products for your Keystone Everest Fifth Wheel 2010. LED Trailer Clearance or Side Marker Light w/ Reflex Reflector- 3 Diodes - Black Base - Amber Lens part MCL32ABB from Optronics can be ordered online at etrailer.com. Complete trailer lights installation instructions and technical support.

All Info
Reviews (4065)
Q & A (0)
Related Parts
Photos

Optronics Trailer Lights - MCL32ABB

4" x 2" Rectangle. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.

Features:

LED trailer light functions as a clearance light or side marker light when properly mounted
Built-in reflex reflector removes the need for a separate reflector
LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
Durable black ABS housing and acrylic lens
Amber lens over white LEDs
Compatible with 12V DC systems
Surface mount to trailer - hardware not included
2-Wire design includes power lead and ground wire
DOT compliant
P2 rated

Specs:

Dimensions: 4" long x 2" tall x 1" deep
Distance between mounting holes (center to center): 3"
Diodes: 3
Power draw at 12.8V: 0.006 amps
Lifetime warranty on LEDs

Optronics MCL32 Series LED Side Marker and Clearance Light with Reflex Diagram

P2-Rated Lights

Diagram of light spread for P2 rated light

A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.

MCL32ABB Optronics LED Clearance or Side Marker Trailer Light w/ Reflex Reflector- 3 Diodes - Black Base - Amber Lens - P2 Rated

California residents: click here

Customer Satisfaction Score:

99% were satisfied with this product

1% of customers were not satisfied

etrailer mistake
Product did not meet expectations

1% of customers were not satisfied

etrailer mistake
Product did not meet expectations

4.8

3558 reviews

5 Stars		(3077)
4 Stars		(353)
3 Stars		(63)
2 Stars		(26)
1 Star		(39)

by: Greg R.02/09/2011

Very pleased with everything

by: Ed P.02/08/2011

Good quality, great visibility

by: Bill A02/14/2011

great

by: Ed P.02/08/2011

Nice quality, great visibility.

by: Bill A02/14/2011

geat products and service

by: David 01/30/2021

by: William 12/18/2021

by: Jarred 04/05/2023

by: Chris 10/28/2022

by: Andy 06/07/2023

by: George 01/29/2022

by: Nick 10/21/2022

by: Jeff 10/13/2022

by: James 09/02/2023

by: Matthew 10/25/2023

by: Ron Franks06/10/2011

Great Lights and Super Fast Shipping

by: Aaron 02/25/2023

by: Thane12/24/2021

by: David 02/23/2023

by: Thomas12/08/2022

by: Jeffrey 01/08/2023

by: Ajs Automotive04/14/2023

by: William 03/27/2023

by: Thomas11/28/2022

by: Loren 02/23/2023

3558

Show More Reviews

See what our Experts say about this Optronics Trailer Lights

Do you have a question about this Trailer Light?

How to Replace a 4-Wire Clearance Light with a 2-Wire Clearance Light
Since both of the green wires are right next to each other and both of the white wires are next to each other I think that's how your running light and ground circuits are linked to the next light. So you could cap off a green and a white wire (electrical tape isn't as safe) when you install your clearance light like part # MCL32ABB but I think that would break the chain and all of the lights on the back of these circuits wouldn't work. The best way to test this out is to simply disconnect...
view full answer...
Replacement Clearance Light for 2020 Mallard M252 Travel Trailer
In order to find a replacement clearance light for your 2020 Mallard M252 Travel Trailer I recommend taking some measurements. The # MCL31AB is 4" long x 2-1/16" tall x 1" deep. This is an LED light that uses a 2-wire design for power. If this matches your light from the other side in terms of dimension and appearance then it would make a good replacement. If you send me the dimensions of the light on the other side and a picture I would be happy to look for a different replacement if...
view full answer...
Replacement Side Marker Amber Light For a 2020 Forest River EVO Travel Trailer
While I cannot look up the exact parts used on your 2020 Forest River EVO travel trailer based on images I could find it does appear you have the Side Marker Light # MCL32ABB. This uses the Lens # A32AB you found. For the hubcap I would need to see an image of the hubcap along with dimensions to determine if we have a suitable replacement for your travel trailer.
view full answer...
Recommended 2 Wire LED Marker Lights for 2015 Four Winds Siesta RV
For your 2015 Four Winds Siesta RV, I recommend the Rectangular LED Trailer Clearance and Side Marker Light with Reflex Reflector- Amber # MCL32ABB and Red # MCL32RBB. These are both 2 wire LED lights that will allow you to add marker lights to your current system without issue. You can simply splice these into your current wiring to add the additional lights you desire. For connection, I recommend # 16-1-1 wire and heat shrink butt connectors # DW05744-10.
view full answer...
What Amber Clearance Light do I Need to Replace Mine on My 2022 Surveyor Legend 252RBLE?
Hello Michael, We have a light that will work for you, but I do not have a database that supplies me with what is put on what trailer. When I look up pictures of the amber clearance light looks like on the 2022 Surveyor Legend 252RBLE, these are the closest options I have found: - LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Black Base - Amber Lens # MCL0032ABB - LED Clearance and Side Marker Light w/ Turn and Reflector - 3 Diodes - White Base - Amber Lens # MCL32ATB If...
view full answer...
LED Replacement Trailer Lights for Optronics 20327-02
We have exactly what you need directly from Optronics. You can get them with either a white base or a black base depending on what you need to match your trailer. White Base Red - # MCL32RB Amber - # MCL32ATB Black Base Red - # MCL32RBB Amber - # MCL32ABB Attached are some review videos for you to check out.
view full answer...
What Gauge Wire Should I Use For Wiring LED Marker Lights
When installing marker lights we recommend using 18 gauge wire like # SWC97FR. This is stranded wire and is what we typically use when wiring marker lights like the # MCL32ABB for example. LED marker lights pull very low amperage so 18 gauge is likely larger than what you would actually need. 18 gauge is recommended because it will be thicker and more durable than smaller gauge wire.
view full answer...
Clearance Light to Replace Old Optronics Light 20327-02
The original light, 20327-02, has been discontinued. You can instead use amber light # MCL32ABB in its place. This is an LED light. If you need an incandescent light then use # MC32ABB. I have linked some video reviews of these lights for you.
view full answer...
Troubleshooting Optronics LED Trailer Clearance Lights Not Working on Trailer
If some of the Optronics LED Trailer Clearance Lights # MCL32ABB that you recently installed aren't powering on I recommend checking the white ground wires on the affected assemblies. Make sure the wire is securely attached to a clean, bare metal surface that's free of any debris, paint, or corrosion. You might want to sand down this surface before re-attaching the wire just to be sure. If this does not resolve the issue I recommend removing the assembly from the trailer and applying...
view full answer...
LED Side Marker Lights With 3 Diodes And a Black Frame With Red And Amber Lens Choices
The LED Trailer Clearance or Side Marker Light w/ Reflex Reflector is available with the black base in both the Red Lens # MCL32RBB and Amber Lens # MCL32ABB. They also have Replacement Lenses available in Red Lens # A32RB and Amber Lens # A32AB. These will come in handy if the cover were to become damaged or fall off while traveling.
view full answer...
Replacement Clearance Lights For a 2004 Fleetwood Jamboree 32E Class C RV Motorhome
Unfortunately, I am not able to see exactly what lights were installed on the upper cap for your 2004 Fleetwood Jamboree M23E. Fleetwood does not keep a database with the part information on their campers. I do know the Clearance Light # MC32ABB was a very popular one used. You can check this with the dimensions on your cover and the shape. This light is 4" long and 2" tall. It uses the 194 Bulb # A194B and Lens # A32AB. If you find you have a different lens you can send me an image with...
view full answer...
Is There a Black Base for the LED Clearance and Side Marker Light
The LED Clearance and Side Marker Light does come with a black base, part # MCL32ABB.
view full answer...
32ABB Clearance Light Replacement Recommendation for 2018 Rockwood 2109S
Most likely what you need is the part # MC32ABB. If this looks like the light it would be the correct part to go with. Or for an LED version you would need the part # MCL32ABB.
view full answer...
What Amber Clearance Light Will Match Up With Red Clearance Light # MCL32RBB
When it comes to replacement LED lights on your 2010 Flagstaff 228 pop up camper that measures out to 4 inch by 2 inch, I recommend The LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - Black Base - Red Lens # MCL32RBB and The Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - Black Base # MCL32ABB. Both lights measure out to be 4 inch by 2 inch and the distance between mounting holes center to center is 3 inches. I have attached...
view full answer...
Recommended Trailer Tail Light Kit with LEDs for Trailers Over 80" Wide
It sounds like you are looking for a trailer light kit for a trailer over 80" wide with LEDs. If that is the case then you can use the LED Combination Tail Light Kit for Trailers part # TLL9RK and just add the marker lights separately which is what makes the kit compatible with trailers over 80" wide, the LED Trailer Clearance or Side Marker Light part # MCL32ABB.
view full answer...
Recommended Wiring For 10 LED Side Marker Lights On 23' RV Trailer
I recommend using the 18-Gauge 2-Wire Bonded Wire # SWC97FR for installing 10 of the LED Trailer Side Marker Lights # MCL32ABB on your 23' shell. While the 18 gauge wire is larger than you need for the very low amperage of these lights it is not as delicate as the thinner wire and less likely to become damaged on your RV. The wire is sold per foot allowing you to get what you need.
view full answer...
Will Replacement Amber Lens # A32AB Fit Side Marker Light # MCL32ABB
Optronics does not list a replacement lens for marker light # MCL32ABB so the only option is to use # A32AB which will fit your light housing. The other option is to replace the whole light with a new one.
view full answer...
Wire Gauge and Diameter of Screw Needed for Optronics LED Trailer Clearance or Side Marker Light
The diameter of the screw holes in the LED Trailer Clearance or Side Marker Light with Reflex Reflector # MCL32ABB (Amber) and # MCL32RBB (Red) is 1/4 of an inch. In regards to wire, it is 16 gauge so if you need leads from your trailer you can use the Primary Wire - 16-Gauge # 16-1-1 with Butt Connectors # 05731-5. I have added links to video reviews for you to check out as well of the LED Trailer Clearance or Side Marker Light with Reflex Reflector # MCL32ABB (Amber) and # MCL32RBB (Red).
view full answer...
Are There LED Amber Clearance Lights to Match Appearance of Furrion Vision S FR98NR
There are LED amber clearance lights that are very similar if not an exact match to the clearance lights of the Furrion Vision S Wireless RV Observation Camera System w/ 3 LED Marker Light Cameras # FR98NR. The amber lights themselves measure 4" x 2" and the option with the same measurements and style are the LED Trailer Clearance or Side Marker Light # MCL32ABB. These are surface-mounted lights and even have a black base so they match the black base of the clearance lights on the camera....
view full answer...
What Are The Dimensions Of The Optronics Trailer Light Item # MCL32ABB
The Rectangular Trailer Clearance and Side Light, Item # MCL32ABB, is a 2-wire LED light. It is 4 inches wide x 2 inches tall x 1 inch deep. It surface mounts on 3 inch centers. Contact me if you have any more questions about this or any other product.
view full answer...
Red LED Version of the Clearance Light MCL32ABB
The red LED version of the part # MCL32ABB that you referenced is the part # MCL32RBB. This is an exact match minus the lens color.
view full answer...

Do you have a question about this Trailer Light?

Info for this part was:

Expert Research:

Michael H

Expert Research:

Jameson C

Expert Research:

Jeffrey L

Installed by:

Cole B

Installed by:

Randy B

Updated by:

Amy B

Updated by:

Brian T

Video Edited:

Chris R

Written by:

Wilson B

Video by:

Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.