bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
FITS 2013 Scion tC
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: 24815
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$172.57
Retail:$278.11
You Save: $105.54
Trailer Hitch
Confirmed to Fit
2013 Scion tC

excluding Release Series with center exhaust

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Draw-Tite Trailer Hitch - 24815
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

2013 Scion tC trailer hitch from Draw-Tite. Product reviews from other tC owners. Expert trailer hitch advice with thousands of helpful questions and answers. Great prices and fastest shipping.
  • All Info
  • Reviews (122)
  • Q & A (0)
  • Photos

2013 Scion tC - Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Concealed Cross Tube
  • 200 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant Scion tC trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24815 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60899 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24815 Installation instructions

California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

122 reviews
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Great quality



by:

Fast delevery, quick install!



by:

easily installed,happy with purchase



by:

This baby bolts right up in 20 minutes,



by:

on time,fit great love it!



by:

As advertised, good quality and easy to install.



by:

Installed it in 15 minutesEasy install, I put on the car by myself in just 15 minutes.



by:

I love it,,, Direct fit, didn't even have to remove the exhaust like others



by:

Great Company to deal with ...great prices and timely delivery...i highly reccommend



by:
2009 Scion xB

Good Product..seems very durable. Really easy install.



by:
Scion xB

Scion XB HitchExtremely pleased with the service I received and the product that was delivered. Great communication, fast delivery, and a quality product.

Thank you,

Matt C.



by:
2012 SciontC

Nice product, fast shipping and delivery. Product bolted directly onto 2012 Scion tC with no hassle, in less than 20 min.



by:
2012 Scion xB

M y grandson put the hitch on in only a few minutes. Stable and holds the carrier for my scooter without problems.



by:
2012 Scion xB

the bracket on the left side ( drivers side ) was twisted some . but I was able to tighten the back bolt ( the back end of the car) and tap it in line . with the help of a drife punch . I would say a great fit EZ to install



by:

I was supprised at how eazy it installed. I had expected to have to make some modification, but there was no need. It fit perfectly.
Many Thanks.

Harold

PS I will make a picture of it after I get home from visiting my daughter in another state.



by:

Good product and a great price. Only negative commit is I was given the wrong bolts to secure the hitch to the frame. Needed to use it that day so I ran down to Rural King and purchased the correct bolts for the job.



by:
2011 SciontC

It took more time to get the wrench rounded up than it did to install. Plan on it pushing up the bumper cover on a tC about 3/4".



by:

Pricing, ordering and finding the product was great. Check out process is a bit old school. Fast shipping but the receiver had a few small paint chips in it. Nothing I would return it for but it will be the points it will start to rust at. Overall pretty happy.



by:

PurrfectPiece of cake installation, minimal visual footprint, sorta hidden, works great pulling my motorcycle trailer. We are planning to buy a small camper and this will handle it as long as we keep within its capability.



by:
Scion xB

I ordered the towing hitch draw tite kit for my Scion Xb. It was easy to install. I also got the harness for the electrical and I was pleased with the intallations. Do it your self type. I am waiting to get the trailer to see how good it holds and to see if the electriacl work as well. First facet was as easy as apple pie. The delivery was as promised. So far so good.



by:
2012 Scion xB

aloha-this hitch was an exact fit for my 2012 Xb and installed in under ten minutes. My existing bike rack slipped right in and now i'm heading down to the beach for a day of riding along the coast. This product is as advertised; shipped within two days; priced right; outstanding customer service from start to finish. Don't bother looking beyond etrailer.com. mahalo



by:

For quite some i have been time trying to find a hitch for my vehicle so I found this web site. They were absolutely friendly and very knowledgeable of their products I will definitely refer them to anybody who asked me about a trailer hitch package and for my future purchases. It was very easy to install and it came with all instructions and hardware I need.



by:

I took lots of pics of all different angles but I'll send a few :) Thank you guys for all your help, it looks good and people are asking where I got it, so I'm spreading the word about your site.



by:
Scion xB

Scion xB hitch installedPhoto of installed hitch on Scion xB



by:

It was so easy. I have never installed one of these before, but it went on without a "hitch" ; ). It arrived when they said it would and I was able to track it the whole way. I going to make sure to tell everyone I know about e-trailer.


25
122
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Replacement Hardware for Hitch that Fits 2009 Scion xB
    Hey Kenneth, we offer replacement trailer hitch install hardware for all of the hitches we carry including the Draw Tite part # 24815 that fits your 2009 Scion xB with the part # RHK. Is this the hitch that you have currently?
    view full answer...
  • Trailer Hitch for a 2016 Scion iA
    Trailer hitch # 24815 does not fit your 2016 Scion iA but you can use Curt trailer hitch # C11421. The other hitch fits older and different Scion models just not your iA. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch. Curt also says you have to use stabilization strap # 18050 when using...
    view full answer...
  • Trailer Hitch Fit for 2013 Scion xB Release Series
    You are correct that one of the hitches offered for the 2013 Scion xB, Draw-Tite Class I hitch # 24815, does not fit on the Release series. The other hitch offered is the Curt Class II model # C12490 and I confirmed with one of my technical contacts at Curt that it is compatible with the Release series version of the 2013 xB. Installation instructions and a video showing a 2014 xB are both linked for your reference. This hitch will be compatible with Class II accessories that fit its 1-1/4-inch...
    view full answer...
  • Recommended Cargo Carrier for a 2011 Scion TC
    I would be happy to! It looks like the only hitches for a 2011 Scion TC are 1-1/4" so you are going to be limited to 200 lbs total. With this in mind, I recommend the 17x46 Curt Cargo Carrier for 1-1/4" item # C18145. This carrier measures 48" long x 20" wide x 6" tall and weighs only 28 lbs. You'll have right at 170 lbs of weight you can add to it. You can use the etrailer Cargo Bag w/ Mounting Straps item # 988501 to keep your equipment dry. We actually did a review video of this cargo...
    view full answer...
  • What is the Correct Ball Mount for a Draw-Tite Trailer hitch # 24815
    The Draw-Tite Trailer Hitch, # 24815, is a Class I trailer hitch. Only Class I accessories will fit. The reason is that Class I trailer hitches have a built in stop that will only allow Class I accessories so you do not accidentally overload the hitch. You can see this stop in the 4th picture on the product page. Also, with any Class I or II trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer otherwise you will void the warranty. The correct ball mount...
    view full answer...
  • Hitch Mounted Cargo Carrier Recommendation for a 2011 Scion tC
    Hitch mount cargo carriers are not tested to fit to specific vehicles. Instead, they are designed to work with specific classes of trailer hitches. The Carpod Walled Cargo Carrier, # M2205, that you referenced was designed to work with Class III and Class IV trailer hitches with a 2 inch receiver opening. I have some options available for you, however, I do not recommend using the Carpod carrier with your 2011 Scion tC. All of the trailer hitches available for the tC are Class I trailer...
    view full answer...
  • Recommended 1-1/4-Inch Trailer Hitch for 2008 Scion xB
    We do not maintain relationships with local installers for the hitches we sell but our hitch vendors, such as Draw-Tite and Curt, do provide a dealer-locator service on their websites. Many of our customers tackle the install on their own since we include hardware, instructions as well as videos to help. The hitch I recommend for your 2008 Scion xB is the light-duty 1-1/4-inch Class II model from Curt, part # C12490. This offer a higher weight capacity than the same-size Class I hitch...
    view full answer...
  • Comparison of Curt and Draw-Tite Trailer Hitch Receivers on 2010 Scion xB
    I can't be completely sure but the hitch in the video review of the Curt Cargo Carrier # C18145, that I've attached, looks be the Curt Class II Receiver Hitch # C12490. There are only two hitch receivers available for your 2010 Scion xB, and the other, the Draw-Tite Class I # 24815 does not have a collar at the opening of the receiver tube like the one used in the video. The Curt is a Class II and has a towing capacity of 3,500 pounds with 350 pounds of tongue weight. The Draw-Tite Class...
    view full answer...
  • How Does Trailer Hitch Receiver Install on 2009 Scion xB
    A trailer hitch like the Draw-Tite # 24815 will bolt-on to your 2009 Scion xB. This uses 4 bolts to attach the hitch to the existing holes in your frame underneath the vehicle. I have attached an installation video below, along with the written instructions for your reference.
    view full answer...
  • Tongue Weight of Draw-Tite 24815 for 2008 Scion xB
    Tongue weight is roughly 10% of hitch capacity. The capacity of this Draw-Tite Class I is 2,000 lbs, making the tongue weight 200 lbs. We have a hitch with a higher capacity for your vehicle. The Curt Class II receiver hitch (part 12490) has 3,500-lb capacity, giving it a 350-lb tongue weight. Since the Scion sits very low to the ground, I would highly recommend a cargo carrier with a rise. You might try the 20x48 Cargo Carrier by Tow Ready, part # 63155, which has a 3 inch rise. This...
    view full answer...
  • Will a Trailer Hitch for a 2005 Scion xB fit a 2008 Scion xB
    The hitches that are built to fit a 2005 Scion xB will not fit a 2008 Scion xB. The 2007 xB brought a new body that included some frame changes which is why the hitches for the 2004-2006 models will not fit the newer models. For your 2008 Scion xB you can use one of three hitches: Curt part # 12490 or Draw-Tite part # 24815. I have added links to these hitches below as well as to a video of the Curt hitch being installed on a 2008 xB and the instructions for the Draw-Tite part.
    view full answer...
  • Hitch Recommendation for a 2007 Dodge Charger
    I have everything you will need, but the Draw Tite hitch # 24815 that you referenced is not a confirmed fit for your 2007 Dodge Charger so I would not recommend it for you. It's for a Scion. You would want the Curt Hitch part # 13465. I attached an install video for you to check out as well. For trailer wiring you would want the Curt Wiring harness part # C55534. For ball mounts I recommend the etrailer Ball Mount Kit # EBMK4 . It comes with 2 ball mounts, 2 balls, a hitch pin with clip,...
    view full answer...
  • Trailer Hitch Recommendation for a 2015 Scion xB
    For your 2015 Scion xB the Draw Tite Hitch part # 24815 has been confirmed as a fit and would work well so I would recommend it for you. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive reviews from our customers who have tried it. Check out the review video I attached for more info.
    view full answer...
  • Parts Required to Tow a 4 X 8 Rental Trailer With 2011 Scion tC Hatchback
    The basic components required to tow a trailer are the trailer hitch, ball mount, pin and clip, hitch ball and wiring harness to operate the trailer lights. I have linked for you two articles on towing; one covers the items needed and the other offers guidance for safe towing practices. We offer several brands of 1-1/4-inch Class I hitches, and all can be seen on the link provided. Since all three are rated equally I suggest the cost-effective Draw-Tite # 24815. I've included a hitch install...
    view full answer...
  • How to use the Swagman Trailhead Bike Rack on a 2014 Scion xB
    The Swagman Trailhead Bike Rack part # S63380 is a great bike rack that would work well for you on your 2014 Scion xB. All you would need to install is a trailer hitch like the Draw Tite part # 24815 which I would recommend for you. I attached an install video for the hitch and a review video for the rack for you to check out as well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Kuat Bike Frame Adapter...
    view full answer...
  • Hitch Recommendation for a 2014 Scion XB
    We carry a hitch that is confirmed to fit your 2014 Scion xB, but the Hidden Hitch part # 60898 that you referenced would not work for you. You would want the Curt Trailer Hitch # C12490. This hitch is confirmed to fit your vehicle and should work very well for you. I attached an install video for you to check out also. If you plan on carrying any hitch mounted accessories like bike racks or cargo carriers you might also be interested in a Curt Stabilizer Strap part # 18050. Check out...
    view full answer...
  • Does Draw Tite Hitch for 2010 Scion xB Come with Needed Hardware to Install
    Yes, the trailer hitches we offer do come with all of the needed hardware to install the hitch. You would just need to provide the tools to secure the hardware. The Draw Tite hitch part # 24815 which is a fit for your 2010 Scion xB comes with all needed hardware. I attached an install video for more info as well.
    view full answer...
  • Is Fascia Bumper Trimming Required to Install a Trailer Hitch on a 2012 Scion tC
    Trimming the rear fascia is not required in the instructions for Draw-Tite trailer hitch # 24815. I have linked the instructions for you to view. However on some vehicles, people did have to allow the hitch to push up the bumper or have trimmed it for the best fit. It seems to vary from vehicle to vehicle. I have included a link to a video that shows a typical installation for you. If you plan on doing some towing the recommended ball mount is # 3593 and you can use pin and clip # PC2....
    view full answer...
  • Recommended Hitch for Carrying Up to 4 Bikes and Light Duty Towing for 2012 Scion xB
    A Class I and Class II hitch is offered for your xB. I'd avoid the Class I, as it would limit you to carrying only two bikes due to its limited weight capacity. The Curt Class II hitch, part # C12490 would allow you to carry up to 4 bikes. Curt's warranty requires that a # 18050 support strap be used by all non-trailer loads like a bike rack. I'll link you to a video showing how the strap is used. For a bike rack that would allow you to carry up to 4 bikes, I'd recommend the Thule Hitching...
    view full answer...
  • Does Draw Tite Hitch 24815 Fit 2012 Scion Release
    I checked with Draw Tite and the part # 24815 is confirmed as a fit for your 2012 Scion tC so it would work well on your vehicle. I looked up pictures of the exhaust on your vehicle and since it is built into the rear fascia of the vehicle this hitch would fit around it. Draw Tite does not recommend any trimming to fit this hitch on your vehicle so it would not require any on yours either. Check out the install video I attached to see more info on the install process.
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane H
Test Fit:
Shane H
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<