What is the Correct Ball Mount for a Draw-Tite Trailer hitch # 24815

Updated 10/31/2011 | Published 10/30/2011

Products Featured in This Question

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(123)

$182.48

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

(2338)

$42.38

Question:

Do I need a special drawbar for this hitch? My Reese drawbar will not go far enough into the receiver to the pin. Can I use another brand/type of drawbar?

asked by: David H

Expert Reply:

The Draw-Tite Trailer Hitch, # 24815, is a Class I trailer hitch. Only Class I accessories will fit. The reason is that Class I trailer hitches have a built in stop that will only allow Class I accessories so you do not accidentally overload the hitch. You can see this stop in the 4th picture on the product page.

Also, with any Class I or II trailer hitch, you must use the ball mount recommended by the trailer hitch manufacturer otherwise you will void the warranty. The correct ball mount for this hitch is # 3593, and it should be used in the rise position only.

I have included a link to an FAQ article on the various hitch classes.

expert reply by: Michael H