THIS ITEM IS NOT A FIT FOR
2003 GMC Sierra
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # 36362
Retail:$237.84
Our Price: $133.06
You Save: $104.78
2003 GMC Sierra
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (13)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 36362
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- No Cross Tube
- Draw-Tite
- 300 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 300 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
36362 Draw-Tite Class 2 Trailer Hitch Receiver
90114 Hidden Hitch Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2010 Jeep Commander
- 2005 - 2005 Jeep Grand Cherokee
- 2006 - 2010 Jeep Grand Cherokee excluding SRT-8
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Package not accepted
- Wrong item was ordered
Customer Reviews
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36362
Average Customer Rating: 4.7 out of 5 stars (13 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Bob R.12/12/2013
As with the reviews I read the installation of the trailer hitch went very smoothly. My biggest problem was determining how to lower the spare tire because there was no documentation discussing the tab that needed to be removed in the tailgate floor.
by: P03/29/2009
2009 Jeep Grand Cherokee
Really was easyInstalled on 09 Grand Cherokee. It took me an hour from start to finish taking my time. I used nothing but a flat screwdriver to remove the bumper fascia pins and a good quality 1/2" socket set. It says to torque to a specified setting, but I'm only using it for a bike rack so I just leaned into it pretty firmly. I also don't need the wiring so add time for that. No alterations needed to bumper, etc.
by: Ken K11/12/2012
2006 Jeep Grand Cherokee
The Drawtite hitch was "snap" to install and took me approx. 20 minutes w/no special tools, just laying on my back on my garage floor. Fron the rear the hitch looks as if it were installed at the factory. I'm very please w/the product and the service I received from etrailer.
by: James07/08/2019
2008 Jeep Grand Cherokee
The hitch is a quality product. Install took 20 minutes. Main use is for bike carrier.
by: jt03/06/2011
Outstanding experince, from order, timely delivery, competitive price, no hidden cost and easy installation. The customer service level was superior to the point of providing video on "how to install".
by: David03/03/2016
All the products that i resived were right and fit like a glove .Thank you
by: Rodney R04/24/2012
Ordered on saturday and got it on tuesday! Thanks for the upgraded shipping! Too bad the bolts weren't shipped with it!
by: Chad C05/05/2015
The package came without any bolts
by: Robert 09/05/2021
Super easy to put on. Very sturdy.
by: Monda06/29/2022
by: mark a.04/21/2015
100% happy
by: Ray C03/03/2011
great selection....great prices....fast delivery
by: Jason 05/17/2021
13
13
See what our Experts say about this Draw-Tite Trailer Hitch
- Aftermarket Trailer Hitch and Trailer Wiring Installation on a 2007 Jeep Grand CherokeeThe trailer hitches we sell for your 2007 Jeep Grand Cherokee do not require that the rear bumper be removed but the rear fascia does need to be detached so it can be moved out of the way to make room for hitch installation. If your Grand Cherokee has the factory tow hook, it must be permanently removed. To do so, you would have to temporarily remove the rear fascia and a plastic bumper support. The fascia and support get reinstalled near the end of the installation. I have included a...
view full answer... - Does Spare Tire Stay In Place with Trailer hitch Installed on a Jeep Commander or Grand CherokeeYes, you can keep the spare tire in position under the vehicle once the Draw-Tite trailer hitch, # 36362 is installed. You will want to remove the spare in order to install the hitch but it will fit back in place after the hitch has been installed. I have included a link to the installation instructions and a link to a video showing installation for you.
view full answer... - Trailer Hitch, Ball Mount, Ball, and Wiring for a Jeep Grand Cherokee Rocky Mountain EditionI spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Grand Cherokee Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details below. The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball mount...
view full answer... - Should I Choose a Class II or Class III for my 2008 Jeep Commander Sport 3.7L V6We always recommend choosing a 2 inch hitch, Class III or higher, if one is available. As you pointed out, your Commander will have a lower towing capacity than other models and the hitch will be capable of more than the vehicle. If your vehicle can handle more than 3,500 pounds total trailer weight, you will have already limited yourself with the 1-1/4 inch Class II. Additionally, there are far more accessories available for 2 inch hitches than 1-1/4 inch hitches. This includes hitch covers,...
view full answer... - Recommended Trailer Hitch For A 2010 Jeep CommanderFor your 2010 Jeep Commander I recommend the Draw tite class 3 hitch # 75338 . This has a 2" receiver and is rated for towing up to 5,000 lbs. The tongue weight capacity is 750 lbs, making the strongest hitch available for your vehicle. Installation will be very easy. You really will not find an easier install for a trailer hitch. 4 bolts and that is it. If you plan to tow a trailer, I also recommend the 4-flat wiring harness # 118408, if trailer wiring is not already present on the vehicle....
view full answer... - Does Draw Tite Hitch # 36362 Come with Install HardwareYes, all of our trailer hitches come with the needed hardware to install them. You would just need to provide the needed tools. The Draw Tite hitch part # 36362 that you referenced comes with 4 nuts, bolts, and washers needed to complete the install.
view full answer... - Trailer Hitch and Wiring Recommendations for a 2007 Jeep Commander Rocky Mountain EditionYes, Draw-Tite trailer hitch # 36362 as well as the 2 inch Class III version # 75338 will fit the 2007 Jeep Commander Rock Mountain Edition. We have someone here who owns one and the hitches fit it just fine. Since you are looking at the Class III hitch I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,...
view full answer... - HItch For 2005 Jeep Grand Cherokee Laredo Rocky Mountain EditionThe only 2” hitch that is specifically confirmed to fit a 2005 Jeep Grand Cherokee Rocky Mountain Edition is the Draw-Tite # 75338 Max-Frame Hitch Receiver. There is also a 1-1/4” receiver (Draw-Tite # 36362 ) but it does not offer the same towing capacities, and a 2” receiver will be more rigid when using bike or cargo mounts. It is important to note that this hitch is not compatible with a factory installed rear tow hook – it will need to be permanently removed if present. I have included...
view full answer... - Tow Ready Custom Fit Vehicle Wiring # 118425 Recommendation for a 2008 Jeep Grand CherokeeFor trailer wiring you would want a Tow Ready Custom Fit Vehicle Wiring, part # 118425, as this Draw-Tite Trailer Hitch Receiver, part # 36362, does not include a wiring harness for your 2008 Jeep Grand Cherokee Loredo V6. I attached installation instructions and video for you to check out also. I attached installation instructions for the Draw-Tite Trailer Hitch Receiver, part # 36362, also. You may be also interested in the following items to complete your towing setup: Class II Drawbar...
view full answer... - Trailer Hitch Recommendation for a 2007 Jeep Commander Rocky Mountain EditionI spoke with my contact at Draw-Tite about Trailer Hitch # 36362. He stated that there are no known fit problems with this hitch and the Jeep Commander Rocky Mountain Edition. He also added that they have not received any calls about the hitch not fitting. So the # 36362 hitch will fit your Grand Cherokee. I have included a link to the installation details to the right. The hitch comes with the necessary hardware for installation. If you plan on doing some towing the recommended ball...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Kathleen M
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
Test Fit:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.