bing tracking image
  1. Trailer Hitch
  2. Chevrolet
  3. Silverado
  4. 2006
  5. etrailer
FITS 2006 Chevrolet Silverado
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Item # e25KR
Retail:$255.08
Our Price: $190.35
You Save: $64.73
Trailer Hitch
Confirmed to Fit
2006 Chevrolet Silverado

1500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 43 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer trailer hitch for your 2006 Chevrolet Silverado are available from etrailer.com. Installation instructions and reviews for your Chevrolet trailer hitch. Expert service, and great trailer hitch prices. etrailer.com carries a complete line of etrailer products. Order your etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e25KR online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Photos

2006 Chevrolet Silverado - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • Concealed Cross Tube
  • etrailer
  • 10000 lbs WD GTW
  • 1000 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Chevrolet Silverado's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 10,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,000 lbs
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e25KR etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E25KR Installation instructions


No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Hitch does not fit Silverado SS models





Customer Satisfaction Score:


Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e25KR

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by:

Very good quality



by:
2007 Chevrolet Silverado Classic



by:



by:

I'm betting you won't post this but here you are: HITCH receiver arrived badly bent due to bad packing, and am unable to install. etrailer is unwilling to replace in time to meet my needs. VERY DISAPPOINTED!!!



by:

Curt makes good products. Very friendly online purchase experience. I would recommend some foam packaging inside the box as my hitch arrived bent. I was able to bend it back with the help of a large C-clamp so the holes lined up. Although the box looked good I suspect it was dropped and that may have caused the bend.



by:

I was very happy with the part that came in and the time was fast.



by:

I own hotrod,and looks mean a lot to me.This hitch is beautiful.Gloss black power coated,and built strong.I am sure this hitch will hold more than the rating.I will be putting it on soon.



by:

Well since a year has no problems at all. But during the install , when the hitch was delivered the box was torn and trying to install the hitch one side was slightly bent. No big deal by using a pry bar and some muscle it worked - again I like the hitch and I've purchased other products from etrailer and will do again thank you



by:

I had to make adjustments in order to make the trailer hitch fit up. Not a big deal but I had to use a C-clamp to get the two wings aligned for bolt insertion. It was also necessary to use a burr bit to enlarge the two front holes at the hitch point and also one of the holes at the corner. ( one had to be elongated by 3/16" and the other two by 1/8"). I wasn't expecting to have to do this at all.
The quality of the assembly welding and paint was very good but the dimensional problem not.



by:

Spend a little extra and get the Curt !! The one that hide’s all framework…you will be glad you did…!



by:

FIT PERFECTLY, INSTALLED BY MYSELF IN ABOUT 45 MINUTES. USING CHEAP HAND TOOLS
SUPER SIMPLE,LINE X TRUCK WANTED 399 INSTALLLED FOR SAME HITCH. AFTER A YEAR NO PROBLEMS



by:

Worst part about installing this hitch was removing my old one first. The parts fit great and installed it myself fairly quickly. Fits just a little higher then the OEM hitch, but nothing that causes a problem. Looks great too



by:

Hitch fit great with no issues installing. If you are looking for a hitch for your 99-06 Silverado/Sierra 1500 that tucks up and behind the bumper, this is it.

Hitch came well secured to shipping box. This is my 2nd order from Etrailer with no issues.



by:

Every bit as good as advertised! Installation was a breeze and took about 30 minutes alone. The only problem I ran into was the cone washers not fitting over the bolts, but I found some in my stash that would fit. I also painted ther bumper mount bolts black because old people are fussy about looks! Great hitch and I'm very happy with it so far.



by:

This hitch fit very well without any hole drilling as advised by product description. I did have to ream out the two cone washers, to fit the existing bumper bolts. Another guy also commented on the cone washers, so this was a heads up for me! Also, those factory bumper bolts on my 2006 chevy 1500 silverado, require a 21 mm socket , which you will need for these two bolts only. Happy so far with this product.
,



by:

this is the second curt hitch i have installed and installation time is less than 1/2 hr and neither required any alterations will highly recommend. truck will be used to tow small horse trailer.



by:

Great hitch. Tucks up nice just under the bumper. Extremely well made, nice powder coating. It will look better than my truck once mounted! I've ordered lots from etrailer.com. I can't say enough about them. Great team of folks that know everything. Product videos, technical support, great prices. Holy Toledo, they have it all. Thanks folks, keep it up......



by:

I ordered wrong hitch. I contacted etrailer and discuses problem with Ashley. She quickly worked through problem. I sent the first hitch back to etrailer and the next day my new hitch arrived and was installed on my truck. I am very happy with etrailer. I have delt with e trailer many times and have always been satisfied with them. They are a good people and easy to work with. I will recommend etrailer to all my friends.



by:

the receiver hitch did not fit like they show you in the video. The holes did not all line up and I ended up drilling two holes a little bigger to make it fit but once I did that and we got it in place and the bolts all tightened down it looks great. The video said it should take approximately 40 minutes, it took another person and I 3 hours monkeying with it before we got it in place.



by:

my only problem was it didnt fit quite right , i had to lay on my back and spread it apart with my legs while my son ran the bolts in , and the r/side bolt by hitch tube was a half hole off and could get a bolt in it so now it will have to be welded to the frame where the bolt is missing, so other than it not fitting right it seems sturdy



by:

Good product, easy to install. The Etrailer people were easy to deal with. My hitch came on time and was packaged well. I would definitely do business with them again.



by:

Delivery was fast.The hitch fit without any drilling and was easy to install. The two bolt that are close to the hitch and bolt to the bumper were too large for the nuts welded into the bumper. I was able to use the bolts form the old hitch. These holes were slightly off and needed some drilling.



by:

Excellent Hitch. Easy to install. Instructions were clear.

Telephone help led me to the perfect electrical connector for my truck!



by:

I purchased this for my husband for a Christmas gift. I love the price and that it is a brand name. I also love the fast shipping. I managed to get it delivered to me when he was out of town. Would buy stuff this company again.



by:

Hitch works great and fit with little trouble. My rear bunper was bent that made it a little harder to put on. But the hitch it self was great


25
54
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • 2007 Chevy Silverado Classic 1500 Trailer Hitch Receiver Recommendation
    I recommend using the etrailer Trailer Hitch Receiver # e25KR for your 2007 Chevy Silverado Classic 1500 because it has a hidden crosstube and matte black finish which means you get a great-looking trailer hitch that is also really durable and hides road debris scratches better than a glossy black finish.
    view full answer...
  • Trailer Hitch Recommendation to Fit Close to 2000 Chevy Silverado 1500/2500LD Bumper
    I recommend picking up the etrailer Trailer Hitch Receiver # e25KR for your 2000 Chevy Silverado 1500/2500LD because it has a hidden crosstube and a 2" receiver that sits just under the bumper. My favorite part of the entire hitch is the matte black finish that's more durable and looks better than the classic glossy finish we see on the other hitch options for your vehicle. Please note this is designed for trucks with the standard bumper. If you have a different bumper design, like a roll...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Justice A
Written by:
Justice A

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924