bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
2019 Cadillac XT4
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Part Number: C11006
In Stock
$231.57
Retail:$376.95
You Save: $145.38
Trailer Hitch
Not Confirmed to Fit

2019 Cadillac XT4

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number C11006 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (19)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C11006

Highlights

  • Custom Fit for Your Vehicle: Mounts to existing attachment points
  • Tows up to 2,000 lbs (GTW): Handles light-duty trailers, campers, or utility loads safely
  • Holds up to 200 lbs (TW): Supports bike racks or cargo carriers for extra hauling options
  • Bolt-On Install: Mounts with standard tools and included hardware—no welding required
  • Durable Steel Build: Fully welded, square-tube design provides lasting strength and stability
  • Gloss Black Powder Coat: Protective finish resists rust and maintains a clean appearance
Made in USA

Features to know about

More Ways to Haul: Add a Class I 1-1/4" Trailer Hitch Receiver

This hitch opens up light-duty towing and accessory options with a 2,000-lb maximum gross trailer weight and 200-lb maximum tongue weight. It’s ideal for small trailers, cargo carriers, or a lightweight bike rack setup. The 1-1/4" x 1-1/4" receiver gives you a solid connection point for the gear you use most without adding bulk or getting in the way.

Built Strong for Everyday Use: Fully Welded, Square-Tube Construction

Made from precision, robotic-welded steel, this hitch doesn’t flex or twist under load. The square-tube design gives it a sturdy, balanced feel when towing or carrying accessories. A gloss black powder coat finish over a protective base coat shields it from rust and road debris so it stays looking good and performing well for the long haul.

DIY Ready: Bolt-On Installation with Included Hardware

The bolt-on design lets you install the hitch with basic tools—no welding needed. It lines up with existing mounting points for an efficient fit that feels factory-level once tightened down. The complete hardware kit and step-by-step instructions make it practical for a weekend project at home.

Dependable Performance in Every Season: Protective Finish and Lifetime Support

The combination of the gloss powder coat finish and protective base coat means corrosion resistance that stands up to rain, snow, and road salt. With its limited lifetime warranty and backed technical specs—Class I rating, 2,000-lb GTW, and 200-lb TW—you get long-term confidence every time you tow or mount an accessory.

Specs

Receiver Dimensions

  • Receiver opening: 1-1/4" x 1-1/4"

Class and Ratings

  • Rating: Class I
  • Maximum gross trailer weight: 2,000 lbs
  • Maximum tongue weight: 200 lbs

Warranty

  • Limited lifetime warranty: Applies to this product

11006 Curt Class 1 Trailer Hitch Receiver

Installation Details C11006 Installation instructions

This Product Fits The Following Vehicles




Ratings & Reviews

4.6

19 reviews
5 Stars
(14)
4 Stars
(4)
3 Stars
(0)
2 Stars
(1)
1 Star
(0)
Review Sort Icon
by:
Ordered my receiver hitch and had it within a few days. Mounted it in less than 10 minutes. Great product
by:
I wrecked my car before I could install my hitch. Their return policy was great so I bought another for my new vehicle
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/1/2025

Oh no! Glad you're okay, Ron.

by:
2007 Dodge Caliber
This hitch seems like it is made very well. When I opened the box, it smelled like it just came out of the powder coater. I havent really used it, as I just mounted it this afternoon. I ordered this hitch for my 2007 Dodge Caliber because of the 2 extra bolts it uses to mount. All of the other hitches I have seen only use 4 bolts, this one has 6. In the product desciption it says it should take about 40 minutes to install and does not require drilling. It took me about an hour, and I did have to drill. I did not have to drill any new holes, only enlarge 2 of the existing ones. The holes in the frame of my car were only about 1/4" and needed to be opened up to 1/2". Other than that, everything looks and feels great. Once everything was all torqued down the hitch feels like it is welded in place.
by:
I have ordered two hitches and wiring harnesses over the past year for my cars. I wanted to pull a small trailer or mount a bike rack quickly. Both orders arrived quickly, all parts were present and assembly was flawless. I will recommend etrailer to my friends.
by:
2007 Dodge Caliber
Great product fast shipping, it bolted right up, I had it installed within minutes I will definitely be buying for hitches for my other vehicles. Waiting for my wiring harnass but am absolutely looking forward to installing it too. Highly Recommend.
by:
Receiver was functional
by:
easy install. works great though had to add a piece of rubber t the hitch as the hitch would contact the muffler when driving on a bumpy road
by:
Fit good on the car but had to drill my own holes in the frame for 2 of the bolts. Fish wire broke on the first bolt so had to improvise but other than that it works good. For my 2010 2.0 just fine.
by:
2012 Dodge Caliber
hitch was dropped off at 3:30 pm from ups and at 4:05 pm the hitch was installed on my dodge caliber. everything bolted it
nice
. installed by myself in my garage.
by:
Dodge Caliber
Excellent quality product. Did require drilling of 2 holes on my '07 Dodge Caliber R/T AWD, but other than that it fit perfectly.
by:
After a year it's solid as the day I installed. Would without hesitation buy another.
by:
No problems whatsoever. Easy install
by:
Was good , But I had to drill to make it fit, besides that it went well
by:
Excellent and fast service. :)
by:
2009 Dodge Caliber
It fit.
by:
by:
by:
2007 Dodge Caliber
by:
2008 Dodge Caliber
19
19
true

See what our Experts say about this CURT Trailer Hitch

  • What Trailer Hitch Is Available For A 2007 Dodge Caliber R/T
    We offer two hitches for a 2007 Dodge Caliber, as long as it is not an SRT-4 model. Anytime you are going to be installing a hitch to your 2007 Dodge Caliber R/T for towing purposes, you will need to check your owners manual for the vehicles maximum towing capacity. You will want to make sure that your vehicle will be able to handle the capacities of the hitch you will be installing. The Curt Class I 1-1/4 Inch Hitch, part # C11006, will fit a 2007 Dodge Caliber R/T. It has a maximum...
    view full answer...
  • How to Tow a Motorcycle with a 2008 Dodge Caliber
    According to owner's manual for your 2008 Dodge Caliber the gross trailer (GTW) and tongue weight (TW) rating of your vehicle with the 2.0L I4 engine is 1,000 lbs and 150 lbs respectively. Therefore, I cannot recommend you use this vehicle to haul your motorcycle (206 lbs) and carrier (36 lbs) as this would exceed the tongue weight capacity of the vehicle. The only way I can offer you to haul your motorcycle is on the back of a trailer. In order to use this trailer you would need a trailer...
    view full answer...
  • Which Trailer Hitches Will Fit a 2008 Dodge Caliber R/T
    The good news is we have a hitch that will fit a 2008 Dodge Caliber R/T. The Curt Trailer Hitch, # C11006. This is a Class I hitch, 1-1/4 receiver opening, 200 pounds tongue weight capacity, 2,000 pounds gross trailer weight. I have included a link to the installation instructions below. The Draw-Tite trailer hitch has some subtle differences in terms of where it mounts and how it is designed which is why it will not fit the R/T model.
    view full answer...
  • Recommendations for Carrying a Dirt Bike with a 2007 Dodge Caliber R/T AWD
    The only trailer hitches available for a 2007 Dodge Caliber are Class I trailer hitches that have a 1-1/4 inch receiver opening. They also have a 200 pound tongue weight capacity which is not going to be high enough to support the weight of the bike and carrier. A higher capacity hitch is not available because the vehicle cannot support the weight. Make sure to consult the vehicle owners manual in the towing section to determine the towing capacities of your Caliber. What I recommend...
    view full answer...
  • Which Ball Mount Should be Used with Curt Hitch that Fits 2011 Dodge Caliber
    Curt actually recommends a longer ball mount # C45016 with the hitch part # C11006 as it is a bit longer like you mentioned and has been confirmed to be the right rise/drop and the correct length. For hitch balls the part # A-82 would be what you'd need for a 2 inch ball or part # A-80 for a 1-7/8 inch ball. For trailer wiring then we have the part # HM11142175 which is an easy fit.
    view full answer...
  • Will Curt Class I 1-1/4 Inch Hitch # C11006 Fit a 2007 Dodge Caliber R/T AWD Model
    I spoke with my contacts at both Draw-Tite and Curt, who both confirm that their Class I receiver hitches # 24769 and C11006 will fit the 2007 Dodge Caliber R/T AWD model as long as it is not an SRT-4 model. Although both hitches look very similar and have the same weight bearing capabilities, I would recommend the Curt model due to its additional mounting points. In my opinion, the two additional mounting locations would make for a stronger installation. I will provide links to the installation...
    view full answer...
  • Receiver Hitch, Wiring and Other Necessary Towing Accessories for 2007 Dodge Caliber
    In order to tow a trailer, you will need a hitch, a draw bar and pin and clip, a trailer ball and a vehicle wiring harness. I would recommend the Draw-Tite Class I receiver, part # 24769. This receiver fits all Caliber Models EXCEPT for the R/T model. This hitch includes the pin and clip. If you have the R/T model, Curt Manufacturing offers a Class I receiver, part # C11006 that will fit all models except for the SRT-4. The draw bar and pin and clip are also included. The trailer rental...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Dan D
Edited by:
Dan D
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924