InfiniteRule Hitch Locks for Patriot Hitches General, Major, Patriot, Commander - 2" Receiver

Video Transcript for Review of InfiniteRule Trailer Hitch Lock - 2 Inch Receiver Hitch Locks Patriot Hitch - IR85FR

Hi, everybody. Andy here with etrailer.com. Let's take a quick look at these InfiniteRule two inch receiver hitch locks for your Patriot hitches. Now, these heavy-duty stainless steel flush-style hitch locks are going to give you superior security when locking a ball mount or accessory to your Patriot hitch, General, Major, Patriot, or Commander hitch ball to your two inch trailer hitch receiver. Now, the grooved pinhead is going to be very easy to grab, it's gonna be very easy to lock and unlock, and it does have all four of these have this weather-resistant tethered dust cap that's gonna help keep water and debris out of the keyway. And then you are going to receive four keys here.

And so one key's gonna work for everything and then you'll have some extra keys. And to unlock this, you're just gonna turn this counterclockwise like you're unscrewing a bolt. And as you can see, it's getting looser and looser, then it's gonna come apart. And if you notice inside, there is an O-ring that's gonna protect those internal components from dirt and grime. And then when you run this through and you're ready to lock this back up, you'll disconnect it, and then you'll just start turning it clockwise.

Maybe I should start turning clockwise rather than counter. So clockwise like you're tightening up a screw. And as you can see, those two ends are coming together. And then once it's tight, there is a set of hash marks around the ring there. So you just want to bring the key to the nearest set of hash marks, and then that's going to allow you to remove the key from the keyway, and then you'll just replace that cap, and then you'll be good to go.

So you are going to get exactly what you see here, three hitch locks and one receiver lock. But all of these locks measure the same. And let me go ahead and retrieve my ruler here and give you some measurements. So the overall length as I line that up there for you, we're sitting really close to 5 1/4 inches overall. And then what's probably more important is going to be the inside pin length or the span.

So inside to inside, right at about 2 5/8 inches. And these are constructed of, like I mentioned earlier, heavy-duty stainless steel. So they're strong, they've got a shear strength of 16,000 pounds. So they're gonna hold up really well, they're gonna do a great job of resisting the elements that they're gonna be exposed to. The diameter of the pins, 5/8 of an inch. So again, this is gonna work with your two inch trailer hitch receiver on your Patriot hitch, the General, Major, Patriot, or Commander. One caveat is this will not work for your 2015 and newer Toyota 2.0 inch receiver. So just so you're aware of that, that information is on this product page. But if you happen to have any other additional questions about these locks, don't hesitate to reach back out to us 'cause we do wanna be sure that you're getting exactly what you want and need. But I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.