To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Don't let thieves steal your cargo or tailgate. Add security for your valuables with this keyed, steel tailgate lock that installs under your GMC Sierra's OEM handle. This custom lock is perfect for use with tonneau covers and camper shells.
Features:
Frustrate tailgate thieves and cargo bandits with this key-operated tailgate lock. Use the Pop & Lock with your truck-bed cover or camper shell whenever you need to lock up valuables in your truck bed.
The Pop & Lock is made of sturdy, armored steel to resist tampering.The black painted steel housing and trim around the lock complement your vehicle's trim and give you a straight-from-the-factory look. This all-steel tailgate lock also offers more theft protection than tailgate locks with plastic housings. The lock mounts in the recess under your tailgate handle, so thieving varmints can't pop it out. The lock is raised slightly for convenient key access and to help prevent your fingers from being pinched. And it installs easily using basic tools - no welding or drilling is necessary.
A new tailgate can cost you hundreds - the Pop & Lock saves you the cost and aggravation of replacing a stolen tailgate.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2011 Chevrolet Silverado, we're going to be installing the Pop & Lock Tailgate Lock part number PAL1300. Before we begin, we'll actually show you the components of this item. We have the lock mechanism itself and a set of keys. We have a 6 mm hex bolt and flat washer, 6/30 seconds screw and a horseshoe shaped mounting insert. And with that, we'll go ahead and begin installing it on the vehicle. We'll begin by opening the tailgate.
We're going to remove this 8-mm bolt and we're going to loosen these two 8-mm bolts. Now, you want to get these pretty loose. It will help with the fitting of the lock mechanism. With that loose, we'll go ahead and shut the tailgate and we'll actually be able to remove this bezel. It is held in by three clips.
With the bezel removed, we're going to go ahead and flip it over and remove this clip, this bolt clip, and set it off to the side. We'll then take the horseshoe shaped insert and slide it down into the bezel itself underneath where the previous clip was. With that done, we'll go ahead and flip it back over, taking our lock mechanism and insert it into the bezel here, making sure that it lines up. We'll then take our small 6/30 seconds bolt, insert it into the small hole here, and go ahead and tighten that down. And with the small bolt tight, we're ready to go ahead and install it on the vehicle.
We'll need to bring the 6 mm bolt and flat washer with us back over to the truck in order to install it. With our handle loose, we can go ahead and re-install our bezel. I recommend holding up the handle a little bit at the top part of the bezel head and then just ease it down back into place and the secure it using the three clips, and then we can open our tailgate back up and we can go ahead and tighten down our two bolts here. And with our two bolts tight here, we'll now use the 6-mm hex bolt and flat washer to insert into the third hole which will grab a hold of the lock mechanism and we can go ahead and tighten that down. With the three bolts tight, our installation is complete.
And that completes our Pop & Lock Tailgate, part number PAL1300.
Ratings & Reviews

John J.
10/5/2014
Like the old model I had on my 1998 GMC Sierra. This one on my 2013 Silverado is flawless. It is starting all ready to show signs of weathering on the plating of the lock cylinder.

Curtis
6/4/2013
Mine was also hard to unlocklock. After one winter of salt and snow it became almost impossible to turn because the flap that covers the key slot would stick back. The key slot filled with road grime. After cleaning the lock out, the key was still hard to turn. By the end of the second winter the lock wouldnt turn at all and the paint had peeled from its surface.Trying a different option this time.

Heather A.
4/23/2025
Hi LeGrand, I attached the install instructions we have for this Pop & Lock below. I also sent them to you in an email just in the case that the link doesn't work. Let me know if I can help with anything else.
Helpful Links

Legrand
4/22/2026
Not working. Not able to install it on my tailgate.

Dom
4/2/2024
As always, this lock works fantastic under extreme conditions of ice and snow it has never unlocked or the locking key hole has never become frozen works every time.thats why its my second one. My first one rotted out.

Mary
4/21/2023
After a year, it works great. Im very pleased with it.

Gary L.
2/11/2020
Yes its been a year and i am still very happy with the lock.I put my groceries in the truck bed and lock it for my next stop with no worry.I still recommend it for anyone wanting to lock the tail gate
Do you have a question about this Tailgate Lock?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Paddy
4/27/2014
One year after installation Im still happy with this product.