To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Don't let thieves steal your cargo or tailgate. This tailgate handle has a keyed, steel tailgate lock, and the lock cylinder can be keyed to match your truck key. Replaces OEM handle. Great for tonneaus or camper shells.
Features:
Note: Does not work with factory backup camera
Replace your existing factory tailgate handle with this chromed ABS plastic tailgate handle that has a built-in manual lock. And you won't have to carry any extra keys for this lock. The lock cylinder can be keyed to match your truck key. Simply insert your key in the lock and turn it clockwise until it stops turning. Then turn the key back to the starting position and remove it from the lock. Your key will now unlock your tailgate. Use the Pop & Lock with your truck-bed cover or camper shell whenever you need to lock up valuables in your truck bed
The Pop & Lock locking mechanism is made of sturdy, armored steel to resist tampering. Because this locking handle replaces your factory tailgate handle, thieving varmints can't pop out the lock. The lock is raised slightly for convenient key access and to help prevent pinching. And the handle installs easily using basic tools - no welding or drilling is necessary. The stylish chrome finish enhances your vehicle's appearance, and the custom design gives you a straight-from-the-factory look.
A new tailgate can cost you hundreds - the Pop & Lock saves you the cost and aggravation of replacing a stolen tailgate.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review Part Number PAL1350C, this is the Pop and Lock Chrome Replacement Tailgate Handle with the keyed alike cylinder. This is a custom fit part, it is designed to fit the Chevy Silverado and GMC Sierra 1500 vehicles starting in 2007, the new body style, also the Chevy Silverado and GMC Sierra 2500 and 3500 vehicles starting in 2008, also the new body style. This is a keyed locking tailgate handle which will discourage theft of your cargo and your tailgate. When using this, it will create secure storage for your valuables when it's used with like a tonneau cover or a truck bed cap on your truck. The lock cylinder uses the bolt, B-O-L-T, codeable technology, this is so it can be keyed to match your OEM truck key. To code it, you just stick the OEM key in there, turn it till it doesn't turn anymore, remove it and it will be set to your OEM truck key to unlock it. This uses a tough armored steel lock that resists tampering. This is customized for your vehicle. The ABS plastic locking handle replaces your OEM tailgate handle.
It's a nice stylish chrome finish to give your truck a high end look. Does use a raised lock for quick key access. It's a very simple installation, there's no drilling or welding necessary. It requires only basic tools. It comes with a nice set of detailed instructions on how to install it and code it. It includes the tailgate handle, lock mechanism, all the necessary hardware for installation.
One last note, now this does not work with the factory backup cameras. That should do it for the review of Part Number PAL1350C, this is the Pop and Lock Chrome Replacement Tailgate Handle with the keyed alike cylinder.
Ratings & Reviews
Excellent product! I just installed it today in about 30 minutes. I am just your average DIYer and this installation was as easy as it appeared in the install video, with no surprises whatsoever. It looks like a factory installed product, works great, and gives me the piece of mind I was looking for. I installed the Pop N Lock on a 2015 Toyota Tacoma with a back up camera. I highly recommend this product for anyone looking to lock their tailgate. Thanks to the manufacturer for providing a solution to an issue for which Toyota has not.
Product quality appears excellent. Installation was a breeze. “How to” vid from mfr was very helpful. I sprayed WD40 on the plastic clips to make removal and reinstallation of the rods a bit easier. Don’t use tools to remove clips from rod, they may break and snap off. Use fingers and combo of force and finesse!
Great replacement super easy to install
Installed the latch in less than 10 minutes. It looks great on my 2015 Tacoma. Very happy with my purchase. The best feature is that I can use my truck key and not carry around one extra key just for the lock.
It appears to be made of good quality materials installed easy works well. I guess the only downfall of it is that I wish that the ignition key to the actual truck would also work to unlock the tailgate. I don't want to have to have two keys, but that's OK. It still works as advertised.
Rear tailgate Pop & Lock with code able lock was easy to install and operates as designed.
It was so easy to install. Thanks for the photos in the directions. It took 15 minutes, tops.
Easy install took 45 minutes outside in 32° weather.
Good instructions.
Good quality too, looks like OEM.
Lock works great!
Secures my tonneau covered
2014 Tacoma Base Reg Cab 2WD
Super easy 15min I was done and on my way. So happy I made the purchase. Now when I travel I can feel a bit more secure. Purchasing was effortless and Shipping was super fast. I will definitely buy more parts from etrailer.
Quick and easy install, the installation video really helped.
Everything works great, giving me a locking bed for my truck. The only thing preventing me from giving a five start rating is the feel of the lock when keyed to lock. My key must be turned al the way to the stop before the lock locks. I am worried that it will fail to lock in the future.
The locking handle has performed very well over the last year. It still looks great but I keep my truck in a garage a lot of the time. It was easy to install and has increased the utility of my truck bed and tonneau cover because it locks now.
So far, so good. It has only been installed for a short period of time, but the fact that it can use my ignition key, and allows for the backup camera really makes this feel almost like OEM.
Easy to install, matches the original - I would have bought a more rugged metal replacement latch if I had known you had one available.
My original Pop & Lock faded a bit after 4 years, so I replaced it with a brand new one. I had added a bed cover and needed to secure the tailgate.
The original worked without issue for 4 years.
I found that reviewing videos of the installation process helped. The installation was easy and the product met my expectations of quality construct and fit.
This replacement tailgate handle is fantastic. Exact fit and very easy installation and it works great. It’s awesome that it can be keyed to your vehicle key.
Really easy install by following step-by-step video, took about 20 minutes. Keying the lock to match my ignition key was simple,and so far it's working great. I read a few reviews that said the tailgate has to be in locked position in order to remove key, I did not find that to be the case, my key comes out regardless of whether it's locked or unlocked. Great product, highly recommend.
2014 Tacoma. This was a piece of cake to install. The biggest problem was finding the proper torx wrench for the tailgate cover remove - fortunately they were not very tight. The factory backup camera re-installed into new handle just fine after removing knockout plug. The two metal arms installed easily. The re-keying to fit my ignition was painless. I'm impressed. Handle is not as sturdy feeling as original OEM handle but is adequate. Not only is the handle smaller (which is expected) but the plastic feels thinner to me. Overall I'm very happy with this lock so far.
Exactly as advertised. Easy to install.
Fast shipping good product have not installed yet will order from company again and I recommend them for your trailer needs
The latch I purchased is not close to factory latch quality. If you don’t have the key in the exact position, the latch won’t open. I wouldn’t purchase another one.
It was very difficult to install correctly. The lock mechanism had to be bent to make work and also I could not tighten the lower bolt because it would not allow the lock mechanism to work properly. It took way too long to install. Also I thought the quality was cheap. I would purchase this produce again.
Lock was easy to install and easy to key with vehicle key. Etrailer customer service is great.
I am very pleased with my tailgate handle. It was simple to install and works perfectly. I like the ideal of being able to key it to my existing key. The Chrome handle looks very good on the truck. It is plastic so I hope it holds up. It seems to be very sturdy. I received the handle in a reasonable time and I am very satisfied with it. I would definitly recommend this handle.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eddy S.
6/19/2015
The products are still being used and are working very good. Thanks you for making a very good product and we hope to have them for years. Will continue to order from you when we need something else. Thanks