Video Transcript for Review of Blue Ox Flat Tow Wiring Harness - Plugs into Vehicle Wiring - BLU25HR

Hello, everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Blue Ox EZ Light Tow Bar Wiring Kit for the Cadillac Escalade. Now, this is a custom-fit part. It is designed to fit the 2007 to 2014 Cadillac Escalade vehicles. And on a custom-fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show you if this will work for your application.

(Jeff coughing) So when you're towing a vehicle behind your motor home, you'll need a way to get the tail brake and turn signals from that RV to your vehicle to be safe and legal. This kit here will plug into your factory connectors that are on your vehicle to connect the electrical signals from the motor home to the vehicle. This is a complete plug-and-play option for your vehicle, so the installation of the kit's very quick and easy. And it is a complete kit. It does include all the hardware and installation components you're gonna need, including detailed instructions.

Some of the parts that are included is this converter box that has the connectors added to it with the four-way wiring. They also include a four-way flat mounting bracket with hardware. So basically, when you run this up to the front of your vehicle, instead of it just hanging there, there's a bracket that'll fit in and hold it into place. And it comes with the hardware. Also comes with a four-way dust cap that you can put on it if you prefer, that you would put on it when you're not using it, if you want to protect the terminals from any damage or from the elements.

And it does come with some terminal grease that you'll put on all your electrical connections. Comes with some cable ties to take up any slack in wiring. And it even comes with a grounding screw. If you look at your four-way, there's a white wire that comes out of it with an eyelet on it, that needs to connect to a good clean ground if there's one nearby. If not, you can use this grounding screw to make (indistinct).

(sniffs) Now, to install this, it is pretty simple. All you have to do is go to the rear of your vehicle and then gain access to the connections behind your tail lights, and you'll start on the driver's side. You'll take this tee connector here, it has the yellow wire in it. That means it's for the driver's side. You'll unplug it on the connectors on the vehicle, plug this into those, and then you'll have this length of wire with the green wire. The green wire indicates it's the passenger side, so you'll run this wire over to the passenger side. Same way, plug this in behind the tail lights. And then, you're gonna take this length of four-way wire and run it all the way to the front of the vehicle. And again, when you get up to the front, you'll wanna make your ground connection and then you'll wanna install your bracket to hold your four-way into place. (clears throat) Now also, always remember, if you have any questions regarding this product or any of our products, please don't hesitate to contact us via phone, chat, or email. Or if you have purchased any product from us, please send us pictures of it being used in your application 'cause we'd love to see how that product's working out for you. But that's gonna do it for a look at this Blue Ox EZ Light Tow Bar Wiring Kit for the Cadillac Escalade.