To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The curved ends on these affordably priced step bars give your vehicle a streamlined look. The non-slip step pads in these polished stainless steel, 3" diameter bars sit in recessed areas instead of cutouts to inhibit internal corrosion.
Features:
Specs:
The step pad areas in Westin's E-Series round nerf bars are indented instead of cut out, maintaining the structural integrity of the stainless steel tubing and preventing internal corrosion.
As shown in the image above, these step bars have a U-style tubing, which ensures that each bar conforms perfectly to your vehicle. Installation is quick and simple - just bolt the mounting brackets to existing holes in your truck's frame. No drilling is required.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
nerf bars are perfect.
Shipped fast and arrived in great condition, was very easy and quick to install, look great on my truck and a very welcomed addition compared to my last truck steps.
Great product. Perfect look - high shine finish. Exactly what I wanted
Still holding up good. Great product with wonderful customer service.
The rear mounting rail bracket for this product unfortunately aligns with a dip in the Bronco frame rail due to the Bronco's shorter wheelbase (front to rear). I was able to drive the bracket on with a big hammer and we'll see if it stays where put over time. For the Bronco's, if you made thee rear swing bracket 2 inches longer, the mounting bracket would then land in level part of the frame as it does with the F-150. I could not mount the rear bracket further back due to the leaf spring mount being in the way.
The Westin 23-3700 Nerf Bars look great on my 2014 Chev
Silverado.Installation was very easy and took about 45 min.
Great quality.Excellent support and delivery from Etrailer.
They look nice, but two of the coupling nuts stripped and the instructions called for 1.75” bolts which the ones included were 1.0”. Luckily Home Depot had replacement couplings and bolts, so in the end got them installed. Beware if you are installing on an OBS Ford. Other than that, looks great.
Had Westin step rails (nerf bars) on an old Ranger and got them for my new F150. This time I needed them to be able to get up into the rig (full-size pickups have gotten a lot bigger and taller in the past few years!). They installed easily, look good, and gave me the step I needed. I am as pleased with the latest step rails I got as I was with the old ones (which are now 21 years old and still functional … but not as pretty).
When I get them installed, in a couple weeks, I’m sure they will accentuate my new paint job. If I ever get my “Hood Shield”,ordered since June, it will complete my overhaul.
Just replaced my old Westin nerf bars with these new ones! My old ones was 30 years old. These new ones should out last my truck!! Bolted right on. Look good! Very sturdy. Good price very fast shipping!!! Only problem I had to rethread nut in tube. Threads was messed up but I got it fixed. All good!!
Fixing up the 2009 F150 regular cab that had Westin Nerf Steps from the factory. We gave it to our granddaughter for her 16th birthday. Somewhere over the years she had hit a pylon at a service station Badly damaging the step. Everywhere I looked showed it to be discontinued. Came across the etrailer site showing it. Called to confirm the fitment, Sara from customer service went out of her way calling Westin confirmed it was discontioned but asked if they might have some stock. They did received it in 2 days.
Well, it seems that the directions included are: 1. Missing a page or two; offer virtually no help in installing because what photos are included are poor B&W, 2.There are no videos on your site nor the Westin site that show how to install these ON MY TRUCK, 3. Using some videos I found online posted by customers who care enough to help I installed them; however, the bars hang too low at the rear (not parallel with the body, front to rear), making the bars look terrible. All the pieces were there and were in very good condition. I will need to modify the installation with spacers, maybe a better-positioned hole or two. Good customer satisfaction depends upon the product and the instructions and tips. The product seems good. The customer satisfaction via the directions/tips is awful.
A quality set of nerf bars at a reasonable price. Installation was simple as well. Customer service during the ordering, delivery and follow up is second to none. The nerf bars helped bring an old truck back to life with some shine!
Nerf bars came quickly. They were packaged well and secured in the box. All the items were marked for side and location. They did look good and welds looked good.
These replaced a powdered coated pair of Nerf Bars that we had gotten new with the truck. After 7 years and that many winters where mag chloride is used on the roads, the originals were pretty much a hunk of rust. These stainless steel ones look sharp on our RAM 2500. And I’m sure they will do the job as the first pair did.
Good product.
Directions were poor. The copy that came with the product was very light and hard to read. Finally found a good [video] that was very good. Looks great installed, would buy from your company again.
These have been a wonderful help getting in and out of my truck. I would buy them again in a heart beat if I needed them. Easy purchase and Easy install.
Ordered these for a 2005 Dodge 1500 reg. cab. They make it a lot easier to get in the truck. The video of the installation helped a lot, the directions not so much. It took about and hour to install.
The material quality was good. The installation instructions were awful. They did not match my truck at all. It took a lot of wasted time figuring out how the parts were to be installed. The first side took over 2 hours. After figuring it out, the 2nd side less than an hour.
They are holding up very well. I got the stainless-steel ones this time as the others rust from New England weather.
My son suggested I order from etrailer because he had dealt w/them before w/very good success. The running boards came yesterday afternoon. VERY well packaged w/banding & bubble wrap. They were in very good condition w/all necessary hardware to install. After unwrapping took him, my son, approx 45 min to install w/hand tools & an air impact on the ground in driveway. Instructions were "adequate" but a simple video I found online helped - We learn better by seeing. These boards are high quality, fast delivery & VERY good experience dealing w/etrailer.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Richard
9/4/2025
Still holding up. No rust. Still have the same shins as when new.