To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get into and out of your vehicle with ease by using these sturdy, durable steps. Multi-mount system ensures a precise, stable fit. Wide, flat, non-slip surfaces provide sure footing, and the black finish complements almost any application.
Features:
Specs:
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
Great product well informed quick delivery overall excellent
Excellent service and recommendations to Product Quality!!!
Very good shpping
Awesome product. Directions were perfect. Steps are just right. Now my wife can jump in with ease.
Product was above my expectations. Delivered in timely manner. They take care of business
Product was above my expectations. Delivered in timely manner. They take care of business
Easy to install, problem was where exactly to install them.
Exactly what I expected and does exactly what I need. Gives my wife a step up into my truck.
These steps are on my 1994 Ford F250 4WD Farm truck . I needed them to help me get into and out of the cab at my age (76). Great product.
I really like your products
I like them a lot. Showed up on time couldn't ask for more
Great product, easy installation
Thank you
The Side Steps are very well built and heavy duty. I am happy with out purchase and delivery.
Perfect fit. Price was right. And super fast shipping....what isn't there to like.
Very strong support,easy to clean and I would recommend to anyone that does not want full running boards!
After a year, the step bars are holding up well. Not loose or bending of body panel. If your looking for a good product to get in and out of your truck without the bling. This suits me well.
it went together easy have an issue with 2 of the bolts will not tighten up like it ran out of threads just spins went to parts house and replaced but that is the only negative
Quick and complete. Thanks
Good quality steps. Instructional video really made the job easy and they fit perfectly. I would recommend buying these. I put then on a 1994 f350 4wd.
Super easy to install on my 96 F-Superduty and they look good too. Highly recommend them.
I love this steps on my 1988 Ford Bronco. Are very helpful to get inside the truck.
Still very happy with the steps. Instructions were useful and the product has held up well. It doesn't have a lift kit or muddier tires, but my old F250 is still pretty tall. The steps make entry and exit much easier for and old guy and his short wife.
I purchased "Carr" steps for our "new" 1989 Ford F150. The hardware supplied with the steps was excellent compared to some imported products. There were good instructions and everything fit. This will help by spouse get in and out safely and with a bit more dignity.
Jerome
8/6/2025
the steps for my F 150 4 X 4 make it easier for my wife and I to get in. They have held up very well.
Gwendolyn Y.
8/6/2025
The steps themselves are solid, and make getting in and out of our truck easier, esp. for older folks. I have a minor issue with the installation instructions, however. In the instructions, they state:
" 8. *REFER TO DIAGRAM “A” WIRE HARNESS. Remove the plastic cover that is holding the carpet down and move the wire harness out of the way before drilling out the hole for the next step as shown on the diagram. Do
this procedure for both sides of your vehicle, because the wire harness may be on either side."
There's insufficient space to move the wiring out of the way as the hole for the sheet metal screw ends up dead in the center of the channel , so I used a piece of angle iron slipped under the wiring to protect the harness while drilling the hole. Once I installed the screw, I realized that the sharp point of the screw would be rubbing against the harness, and would eventually cause a short. To prevent this, I slipped the extra 1/4" Nyloc nuts provided in the kit over the sharp end of the sheet metal screw as shown in the photo.
I realize that there's not much room to use another type of fastener and working around the harness is awkward, but I think the sheet metal screw should really be replaced with another fastener that doesn't present a hazard to the harness. A 1/4" Torx button head bolt inserted from the top would definitely be an improvement, for example.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
02 F.
1/21/2023
I have been using them for a year and they are holding up great.