Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get into and out of your vehicle with ease by using these sturdy, durable steps. Multi-mount system ensures a precise, stable fit. Wide, flat, non-slip surfaces provide sure footing, and the black finish complements almost any application.
Features:
Specs:
Average Customer Rating: 4.7 out of 5 stars (279 Customer Reviews)
Get into and out of your vehicle with ease by using these sturdy, durable steps. Multi-mount system ensures a precise, stable fit. Wide, flat, non-slip surfaces provide sure footing, and the black finish complements almost any application.Nice solid product. I would have given it 5 stars but the brackets for mounting were not the best. Had to adapt them. But all in all a very good product
excellent customer service
Look nice, haven't installed yet
It's a nice install and nice-looking product.
You always deliver a quality product fast.
I bought these Carr steps to dress up my 2019 Ram 2500. I’m going for the ‘utilitarian minimalist chic’ look and these nailed it far better than the factory running boards.
What I liked -
- Heavy duty- steps and hardware feel substantial
- Mounting kit made specifically for my truck
- Straightforward instructions
- Super solid and stable
- Look far better than nerf bar steps
- Brackets came slightly expanded which made fitment easier. They bent in to a tight fit once the bolts were torqued down
What I have mixed opinions on -
- I had a tough time getting just the right fit, as the lip on the truck isn’t that big, perhaps 3/4”. Some holes I drilled using the “hold up the bracket and mark with a sharpie” method were too low, leaving not quite enough material beneath the hole. Other holes that were a little on the high side made for a tough fit of the bracket. So be patient, measure twice, drill once
- There was a whole bunch of extra hardware! Sort it all out on the counter beforehand to see which jives with the instructions and set the others aside
- Had some bad washers in the hardware kit
I purchased "Carr" steps for our "new" 1989 Ford F150. The hardware supplied with the steps was excellent compared to some imported products. There were good instructions and everything fit. This will help by spouse get in and out safely and with a bit more dignity.
Originally ordered these as a replacement for the front. Did not check size before ordering.
Decided to put them under the rear doors instead.
Since I already had them on the front and was able to see how they were mounted, it made the install was a piece of cake.
The instructions were clearly understood for my Silverado and only took me about 15 minutes per side to install.
I have since ordered the larger pair for the front and will use the same brackets to replace.
Only gripe is the finish on the ones that were originally on the truck (8 years old) has chipped off due to mag chloride on the road and frozen ice being knocked off.
Since I was not the original purchaser, I cannot claim warranty issues as they are guaranteed for life.
Hopefully with the new ones Carr perfected their coating, we will find out in another 8 years!
These were a perfect choice for our 2016 Winnebago Travato 59G. Not a lots of skill required and they look great. Very nice product. Thank you for the fast service.
My order arrived in less than a week and it took about a hour or so to install. Instructions were clear and easy for most any fitment. For my Chevy it could not have been any easier. This truck is for my daughter who has spina bifada so it enables her to climb in easier. The steps look great and I'd highly recommend them and etrailer. I've used etrailer a few times now and will continue as they have quality parts at some of the best prices!
Great product but I couldn’t use your directions because I mounted it on my Ford 8n tractor. In fact I only used the four bolts that connect mounting brackets to step. I cut two pieces of flat stock welded it on frame and drilled 2 1/4” holes 2 on each mount and viola the job is finished and now my wife can get one and off tractor with ease. Great product and it was the only one I found that fitted my needs for mounting flat on top of stock and stair is adjustable. I recommend this product to anyone looking for a quality piece at a great price. Thank you etrailer for creating this outstanding step.
Awesome customer service. Answered all of my questions to help me get an account setup and to get the correct part.
It fit well and does what it is intended to do. Was easy to install...after the holes were drilled. If you would like more adjustability to where the step can be located, I'd recommend a longer step. On a 2024 2500HD Sierra crew cab, the frame cross member allows for only one attachment point (+/- maybe 1/2") for the front step. It would have been nice if solid carbide drill bits were included instead of twice as much hardware as I needed (each step came with enough nuts/bolts for 2 steps). Cobalt and Titanium bits worked, but took a while and I could only get about 2 holes drilled before bit was shot. Overall I'm happy with the purchase.
it went together easy have an issue with 2 of the bolts will not tighten up like it ran out of threads just spins went to parts house and replaced but that is the only negative
It helps me to climb into my truck,with adding an extra step. Very happy with it.
Still very happy with the steps. Instructions were useful and the product has held up well. It doesn't have a lift kit or muddier tires, but my old F250 is still pretty tall. The steps make entry and exit much easier for and old guy and his short wife.
Simple ordering precise & quick. Nice Email response from etrailer. Easy instructions right out of the box & on to the truck. Easy in & easy out of the vehicle, nice & sturdy you cannot go wrong with a reputable name to back it up. I am a satisfied consumer.
The step has worked perfectly. However, I installed it myself, I was enable to
drill one of the attachment, even with a 90 degree drill and the proper bit and oil in my 2023 Sierra.
Needed to drill custom holes on my Promaster for install but that’s an issue with the van rather than these. They’ve held up fine for over a year of use no prob.
Sturdy product, works well on our Promaster 3500
Love this step!It is a replacement for one we lost in an accident. Glad they sell just one!
This fits perfectly on a 2014 Tundra. I had trouble finding ones that fit with the way the rocker panels are angled. Worked out well and I’m very happy with the results. etrailer is a great place to search for items you need and the service is excellent.
I like the steps and they look great. But the instruction sucked a lot. Didn't show me how to install it right, came with way to many parts. And was wrong on how to put the bracket on the step and onto the step. Just be more precise and descriptive of the process, and use pictures. I had to YouTube how to put these on versus using the included instructions.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.