Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Loose lug nuts are the last thing you want to worry about. The beveled stud holes on this wheel seat it firmly against the hub, keeping everything snug mile after mile. Once the wheel is mounted, it stays put without constant retightening.
This modular steel wheel is made to handle serious use. With a 2,200-lb load rating, it provides a solid foundation for repeated trips and heavy loads. The steel build holds up through long drives and rough pavement, giving you confidence every time you tow.
The 5 on 4-1/2" bolt pattern is one of the most common out there, which makes finding a replacement or spare simple. With a 3.19" pilot diameter and 1/2"-20 wheel bolt size, it fits up easily and delivers a clean, balanced setup that just works.
The modular cutouts give this 14" x 5-1/2" rim a practical style that looks good without being flashy. Its black powder coat finish resists chips and corrosion, keeping the wheel looking sharp while standing up to moisture and road grime over time.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Lionshead 14-inch by 5 1/2-inch black modular steel trailer wheel with the 5 on 4 1/2-inch bolt pattern. Now this is a steel wheel, has the modular design, which is sturdy and corrosion-resistant. And the modular design is the one that has the round holes that go all the way around the wheel. The rust-resistant finish on this includes a black powder coat on the front and even on the back of the wheel. And if you notice, the center cap is not included.
If you do want a center cap, we do sell those separately on our website. You do wanna make sure to get one that'll have the same diameter as this pilot hole, 'cause when you do install that center cap, it will go through this hole. The diameter on this pilot hole is 3.19 inches. But also, if you notice right down here, the valve stem is included. It is pre-installed in the wheel.
And this wheel does meet the DOT, Department of Transportation and the SAE J1204 specifications. The wheel is made in the USA. Now, I do want to give you some dimensions on this. We're gonna measure it. The diameter and the width.
And the diameter, when you measure it, it's always measured inside to inside or bead seat to bead seat. So if we take out a tape measure, and if we go straight across, inside, inside, there's your 14-inch diameter. The width is gonna be the same way. Bead seat to bead seat or inside to inside. There's your 5 1/2-inch width.
And the bolt pattern on this wheel is a 5 on 4 1/2-inch bolt pattern. And if you wanna measure that bolt pattern on a wheel like this, that's an odd number of lugs, which is five. What you'll need to do is pick any hole, let's say this one, and then you're gonna measure across to either one of these holes. But when you measure, it's from the center of the starting hole to the furthest edge of whichever hole you measure too. So on this one, if we measured, it'd be 4 1/2 inches. So that's telling you that it is a 5 on 4 1/2-inch bolt pattern. This does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 2,200 pounds. Now we do also offer many other items for your trailer. Click on the Trailer tab that's at the top of our website page. And also if you have any other additional questions regarding this part or any other item we carry, please feel free to reach out to us so that we can get all of your questions answered. But that's gonna do it for our look at the Lionshead 14-inch by 5 1/2-inch black modular steel trailer wheel with the 5 on 4 1/2-inch bolt pattern.
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
Ratings & Reviews

Mike
4/28/2021
Excellent no problems
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Lazer S.
12/30/2025
Glad we could help, Greg! Let us know if there is anything else we can help with! Out of curiosity, what kind of animals do you raise? I like animals. They are delicious! : P