What Size Bushings Does the Trailer Slipper Spring Part # e33SR Use
Updated 04/29/2015 | Published 04/28/2015
Products Featured in This Question
Question:
What r the bushings these springs use SP-264275
asked by: Juan V
0
Expert Reply:
The bushings of the 4-Leaf Spring part # e33SR have a 9/16 hole diameter.
If you are looking for a replacement bushing you would want the part # TRBU11561. This bushing has a 9/16 inner diameter and an outer diameter of 1.02 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Marine Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Review of EMCO Trailer Leaf Springs - 4 Leaf Slipper Spring With Open Eye 4300 lbs Axle - EM98AJ
- Search Results: 4 leaf slipper spring
- Video: Nylon Bushing: The Breakdown
- Shop: Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
- Shop: etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Shop: Nylon Bushing - 9/16" Inner Diameter, 1.024" Outer Diameter - 1-3/4" Long
- Video: A Closer Look at the Nylon Bushing
- Shop: 4-Leaf Slipper Spring w/ Open Eye End for 4,300-lb Trailer Axles - 26-1/4" Long
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Is It Normal For Open Eye Spring To Hit Frame Of Trailer When Loaded?
- Q&A: How to Determine Correct Replacement Slipper Springs
- Q&A: Recommended Replacement 26-1/4" Slipper Spring
- Q&A: How to Determine Correct Replacement Slipper Springs
- Q&A: Bolts Needed To Install Slipper Springs
- Q&A: Leaf Spring Replacement for 3,600 lb Boat that is 26 inches Long
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring