This U-bolt, in conjunction with a U-bolt plate and an additional U-bolt, attaches your round, 10,000-lb axle to your leaf springs. Bolt is 8-7/8" long and has an inner width of 5".
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number 11-77. This is the replacement U-bolt for a 10,000 pound round trailer axles. This U-bolt in conjunction with a U-bolt plate and an additional U-bolt that would be the same as this one, you could easily attach your round 10,000 pound axle to your lease strings. This unit is going to figure round trailer axles with a 5-inch diameter. It's going to include two lock nuts and one U-bolt. Now if we take a measurement of the opening here, inside edge to inside edge, that's going to give us a measurement of about five inches. The bolt diameter is going to measure 5/8ths of an inch.
The length that we have, measuring from the bottom of the curve to the end of the threaded portion, it's going to give us a measurement of eight and 7/8ths of an inch. Our studs are going to be separated by five and 3/4ths of an inch on center and if we take a measurement of the threaded portion, just the length of the threads, that's going to give us a measurement of about two and 5/16s of an inch. That's going to do it for our review of part number 11-77.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.