Video Transcript for Hands-On with the Removable, 8" Poly Caster Assembly for etrailer or Ram Jacks

Today we're going to be taking a look at the removable 8" wheel for etrailer or Ram Jacks. This wheel is designed for etrailer or Ram 1,500-pound marine jacks. This makes a great replacement to your caster assembly if your jack wheel is ruined or damaged. It's constructed of a very solid, durable, polyolefin construction, very long lasting as well. Now, a wheel on your trailer jack makes moving and moving the trailer around much easier. Again, this is designed for marine jacks with a 1,500-pound capacity. A few measurements to go over with you real quick.

Starting with the diameter of the wheel, you'll see that diameter is going to measures around 8". The wheel width is going to be about 2" wide, and it's a simple installation. It does come with the hardware necessary for installation. Basically, what you would do is you'd place this in that caster bracket, so the caster housing attaches to the bottom of the jack, usually the inner tube of the jack. Then, what you would do is you would place that bracket around the wheel, line up the holes. It comes with the bushing there, so you want to place that in.

Then, you take your bolt place it through, and on the other side you place on the flat washer, followed by the included nylon lock nut. Then, you just get it all the way tightened down. That's going to do it for today's look at the removable 8" wheel for etrailer or Ram Jacks.