Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Driving or parking in low light can be risky when other drivers can’t see your rig soon enough. This Optronics reflective tape uses a technologically advanced microprismatic design that bounces light back at up to 250% more brightness than traditional glass beads. The alternating 7" silver and 11" red pattern runs the full 150' length and meets DOT certification standards, so it’s perfect for helping others spot your trailer from far away.
Rough roads, sun exposure, and weather take a toll on lesser tapes. This one is made of flexible polyester metalized film with a UV-resistant top coating that keeps colors from fading. It withstands high-pressure washing and resists delamination even after years of use. Impact-resistant construction means it keeps performing after taking hits from road debris or daily wear.
Few things are more frustrating than reflective tape peeling off after the first wash. The high-strength adhesive on this roll resists edge lift and sticks smoothly across flat, round, or curved surfaces—no grid lines or air pockets to trap water underneath. It’s repositionable during setup, then fully cures within 24 hours to create a long-term bond that stays where you put it.
Whether you’re outfitting a work trailer or marking a custom build, this tape makes compliance easy. The DOT approval is printed right on the surface, and the roll can be cut or riveted without losing reflectivity. At 2" wide and just .008" thick, it fits cleanly wherever visibility marking is required and carries a 5-year warranty for peace of mind.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com. Let's take a brief look at this Optronics Conspicuity reflective tape. This alternating red and silver reflector tape is going to make your truck or trailer more visible in low light conditions. This 150 foot long two inch wide roll features seven inches of silver and 11 inches of red in the pattern on this tape. And the technologically advanced micro prismatic design provides superior long distance visibility.
This tape is made of flexible polyester metalized film, and the UV top coating is going to resist fading. And the tape is impact resistant, meaning it's going to maintain its performance even after taking a beating. This is also gonna withstand high pressure washing, and this can be cut or riveted without damaging its ability to reflect light. And its durable construction means no delamination. The high strength adhesive is going to resist tape edge lift.
It's going to easily apply to flat, round, or curved surfaces. And this is also going to be repositionable during installation. It cures in about 24 hours, and it does have the DOT certification clearly marked on there. So hopefully you can see that there, the DOT certification clearly marked on the tape. Well, I think that's going to conclude our brief look today.
I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews
Fluffy G.
2/11/2025
Still sticking and reflecting. Got these for protecting the hitch carrier from the maniacs on the road at night who just cut inout and not aware the carrier is there. I love that I didnt need to buy 500 roll of this stuff like is typically sold online elsewhere.
Robin H.
2/11/2025
Bill M.
7/22/2014
I have been proud of the lights i put on the trailer,they are bright,they really dressed the trailer up,along with all the dot tape,everyone cant help but notice the trailer at night,thanks again for a good product
Mike S.
2/24/2021
Awesome product and our trailer looks good. Glad that we put it on for safety.
Earl L.
3/30/2018
Perfect!
Gwendolyn Y.
4/22/2025
I bet they will look great once they are all on on your trailer!
Roger
12/30/2019
The light is just fine, just a hair different, but when the right side goes out I know where I can get a matching light
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeff I.
12/28/2014
Have added a new wiring harness and side marker lights, trailer looks like a X-mas tree going down the highway. VERY REFLECTIVE. The NEW TRAILER JACK IS SOOOOOOOOOO MUCH BETTER THAN THE custom jack. ALL IS WELL HERE.