Product Experts Available Now!
Call 1-800-940-8924
etrailer Electric Trailer Jack w/ SnapPad - Hardwired - A-Frame - 5,000 lbs
(1 reviews)
Price: $294.69
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
etrailer Electric Trailer Jack w/ SnapPad - Hardwired - A-Frame - 5,000 lbs
Part Number: e956GR
In Stock
$294.69
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Jack - e956GR
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 4001 - 5000 lbs
- Electric Jack
- Bolt-On
- A-Frame Jacks
- With Round Foot
- With Jack Pad
- 18 Inch Lift
- etrailer
Replacing a manual or undersized tongue jack? This kit pairs a 5,000 lb electric A-frame jack with a rubber SnapPad for extra lifting capacity, button-operated lifting, and a wider landing surface that stays attached between stops.
Highlights
- More Lift for Heavier Tongues: 5,000 lb electric jack adds lifting capacity with button operation.
- More Footing at Camp: 7-3/4" rubber SnapPad increases ground contact on grass, gravel, or dirt.
- Leave the Pad on Between Stops: Snap-on rubber pad stays attached to the compatible 6" round jack foot.
- Get Extra Reach Without Running the Motor: 4-1/2" drop leg brings the foot closer to the ground.
- Find the Coupler After Dark: Built-in LED work light illuminates the hitch area during nighttime setup.
- A Backup When Power Is Out: Included manual crank raises or lowers the trailer tongue without 12V power.
Features to know about
Skip the Crank at Every Hookup
Replacing a worn-out jack or moving up from a lower capacity model? This 5,000 lb A-frame jack provides more lifting capacity for heavier trailer tongues, with a button instead of hand cranking. It has 18" of powered lift and a pinned drop leg that adjusts another 4-1/2" before the motor starts. That gives you more reach when the hitch height changes, without winding the jack through all that extra distance.
Give the Jack Foot More Ground to Grip
Grass, gravel, and soft campsite soil can be tough on a small metal jack foot. The included SnapPad fits the jack's 6" round foot and expands its ground contact to 7-3/4". Recycled-tire rubber cushions contact with paved driveways, while the snap-on design stays attached between stops. Set it once and you're not digging around for a separate pad every time you park.
Make the Late Arrivals a Little Easier
Pulling into camp after sunset? The built-in LED lights up the coupler while you get situated. The jack bolts to an A-frame mount and wires to 12V power; rubber-covered controls and an included cover help protect it from the weather. If your battery dies, use the included manual crank to raise or lower the tongue.
Specs
Capacity and Lift:
- Lift capacity: 5,000 lbs
- Powered lift: 18"
- Drop leg adjustment: 4-1/2"
- Total adjustment: 22-1/2"
Jack Dimensions and Mounting:
- Overall height: 29-1/2"
- Mounting plate height: 8-7/8"
- Outer tube diameter: 2-1/4"
- Footplate diameter: 6"
- Mounting: bolt-on A-frame, 3-bolt pattern with 3" on-center spacing
- Finish: black powder coat
SnapPad Dimensions and Construction:
- Application: 6" round jack foot
- Outer diameter: 7-3/4"
- Overall height: 1-3/4"
- Height from foot platform to lip: 3/4"
- Weight: 2.4 lbs
- Material: recycled-tire rubber
- Mounting: permanent snap-on
Electrical and Operation:
- Motor voltage: 12V DC
- Motor protection: 20A automatic reset relay fuse
- Work light: front-facing LED
- Manual backup: included hand crank
Included Components:
- 1 electric A-frame jack
- 1 SnapPad jack pad
- Manual backup crank
- Jack cover
- Jack mounting hardware
Warranty:
- Jack: limited lifetime
- SnapPad: 2-year limited
MN6SP1 REPL SnapPad Jack Stand Pad for 6" Round Jack Foot
e55ZV etrailer Electric Trailer Jack - A-Frame - 5,000 lbs
Video of etrailer Electric Trailer Jack w/ SnapPad - Hardwired - A-Frame - 5,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Trailer Jack - Car Hauler - Enclosed Trailer - Utility Trailer - e956GR
Ratings & Reviews
5.0
1 reviews
by:
Toby
10/28/2026
1
1
true
See what our Experts say about this etrailer Trailer Jack
- Can etrailer Electric Trailer Jack With SnapPad Be Rotated for Tailgate ClearanceHey Tyler! The etrailer Electric Trailer Jack w/ SnapPad can be rotated for tailgate clearance. You'll rotate the entire jack which will angle it back and away to make room for your tailgate to drop. This applies to both versions: -etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR -etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR It won't be a true 90º mounting position because of the triangular mounting pattern, but customers have found with similar models...
view full answer... - Replacement Electric Tongue Jack for a Jayco Jay FlightHi Daniel! I recommend the etrailer Electric Trailer Jack w/ SnapPad for your 2022 Jayco Jay Flight 28BHS. These use the standard three bolt A-frame mount and wire to your camper's 12V battery. You can choose from the following based on the capacity you need: -etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR -etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR Both have 18" of powered lift and an adjustable drop leg so you won't have to run the motor as far at...
view full answer... - Do I Need a 3,500 or 5,000 lb Electric Trailer JackHi Kevin! A 3,500 lb jack is plenty for most travel trailers since it only needs to lift the tongue weight, not the entire trailer. You'll choose based on your loaded tongue weight rather than the trailer's total weight. We have the following options: -etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR -etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR The 5,000 lb model gives you more lifting capacity to spare, and can be a little quicker under heavier loads....
view full answer... - Should I Get a Hardwired or 7-Way Electric Trailer JackHey Melissa! I'd stick with a hardwired jack since your trailer already has a battery. That lets you operate the jack without having your truck nearby or plugging into its 7-way. I recommend the etrailer Electric Trailer Jack w/ SnapPad, and you can choose from the following based on the capacity you need: -etrailer Electric Trailer Jack w/ SnapPad - 3,500 lbs # e356GR -etrailer Electric Trailer Jack w/ SnapPad - 5,000 lbs # e956GR A 7-way-powered model like the etrailer # e22QV is handy...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Installed by:
Steven C
Written by:
Kim H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.