Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This bracket lets you keep your trailer's safety chains and 7-way electrical plug up off the ground when you're not towing. This keeps your parts clean and in good condition. It attaches to your 2" or 2-1/4" diameter trailer jack.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jake: Hey guys. Jake here with etrailer. Today we're going to be taking a look at, and I'm going to show you how to get in place, the Stromberg Carlson Hitching Post. This is going to hold your plug for your trailer, and the two chains for your safety chains. It's going to keep them in a more organized way than just draping them over the frame of your trailer.The hitching post is going to fit 2" jack tubes, and 2 1/4" jack tubes. Here we have a 2 1/4" jack tube, and they do include two adapter sleeves to put on the front and back of the assembly, to be able to fit those 2" jack tubes.Here you can see we have it mounted on our electric jack.
It's also going to work for manual jacks. You just have to make sure it's that 2 or 2 1/4" jack tube. The hitching post is going to have a spot for your plug to go, and it'll have a spring loaded cap to be able to keep the elements and dirt and debris out of your plug, so it's going to ensure a better connection when you hook it up to your vehicle.The hooks are nice, because you don't have to drap your hooks over your trailer tongue, so this is going to keep any of this banging away from your trailer, so you don't have to worry about scratching your paint, therefore introducing rust and corrosion.Now that we've gone over some of those features, let's go ahead and show you how we got it in place. You want to make sure you don't pinch your wires. Line up your screw holes, and then insert your screws.
I'm going to take a Phillips head screw driver or a screw gun, and tighten them down. You do want to be careful not to over tighten them, as this piece is plastic.With your screws in place, you can go ahead and lift up on your lid, install your plug, make sure that lid is over the top of the plug to keep it clean, and then take your chains, and hang them on the outside hooks.Well guys, with all that being said, that's going to do it for our look and installation of the Stromberg Carlson Hitching Post.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Michael
9/16/2025
Still working great after a year. Love how this keeps everything nest and tidy.
Nick S.
9/16/2025
Harry
7/3/2020
Still looks like new and has withstood heat and cold weather very well.
Char
11/3/2023
This product was so worth it. Every time you use it, it keeps chains and cord organized. Living in a climate of the four seasons, the quality holds up. No cracking or broken off pieces. One year later is like taking it out of the package the first day. I would highly recommend.
Mike L.
11/15/2023
Brent
4/1/2024
Great! The tween definitely seems to be holding up to the harsh NM sun and dry heat!
Mike
7/3/2020
Working great this is a very good idea keeps the powerlight plug of the ground and debris from getting into the contacts
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
6/10/2020
Still working flawlessly. Thanks trailer for great customer service!