See what our Experts say about this Fulton Trailer Fenders

• How to Mount a Fulton Plastic Fender # F008553 To a Trailer To Support Weight of Stepping On It
  The Fulton Plastic Fender with Top Step, part # F008553, does not come with mounting hardware. Fulton does not provide mounting bracket kits for the fenders. You can use your fenders original mounting brackets or use the Redline Galvanized Steel, L-Shaped, Bolt-On Brackets, part # PF775-BKT-2. See picture to the right that will show the underside of the fender with the brackets to give an idea of how to mount it to your trailer. I would recommend to install the fender with L-shaped mounting...
  view full answer...
  
• Recommended Step Fenders for Nucamp Boondock Edge T@G Teardrop Camper
  We do offer step fenders that would be compatible with the 13 inch wheels on your Nucamp Boondock Edge T@G teardrop camper. I'd recommend the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps, part # CE19503-2. The fenders are constructed of durable polypropylene that won't corrode and would mount to the trailer using the existing brackets, and have a 300 lb capacity each. The fenders have 3 steps, one on top and one on either side that would help make accessing the roof of your...
  view full answer...
• Replacement Plastic Trailer Fender for a Venture Boat Trailer
  The Fulton plastic fenders like # F008543 are considered more universal than direct replacements though some trailers come equipped with them. So you will need to go by the measurements on the product page which you have mentioned and re-use the mounting hardware from the old fender. This same style and size is also available in black, # F008553, and silver, # F008563.
  view full answer...
• Will I Need To Replace Trailer Fenders When Switching From 4.80-12 Tires To 175/80R13 Tires?
  Since your 2017 Northern Tools 5' x 8' trailer has 4.80-12 tires you will more than likely need to replace the fenders to use the Kenda Karrier ST175/80R13 Radial Trailer Tire with 13" Black Mod Wheel - 5 on 4-1/2 - LR D # AM31990 you were looking at due to the increased diameter of the tire. The # AM31990 is roughly 4" taller and 2" wider. The typical clearance we recommend is 4" from the top of the tire to the bottom of the fender, and 1-2" from the inside of the tire to the trailer...
  view full answer...
• Replacement Fenders for 1988 17 foot long Escort Boat Trailer
  Since we don't carry a fender that exactly matches the dimensions of your existing fender, replacing both fenders would be your best bet. We do have some steel, aluminum and plastic fenders that are pretty close in size, even though they're not an exact match. CE Smith offers a pre-galvanized fender, part # CE17800G that is 27-3/8 inches long by 8 inches wide by 11 inches tall. They also offer a fender in aluminum diamond plate, part # CE17960ATB which measures 28 inches long by 9 inches...
  view full answer...
• Trailer Fender Recommendation Wide Enough for 20.5X8.0-10 Tires
  Your 20.5x8-10 tires are right at 8 inches in width. The Fulton Single Axle Trailer Fender part # F008553 is 9 inches wide so it should have plenty of width for your tires.
  view full answer...
• Recommended Mounting Hardware to Install Fulton Plastic Trailer Fender with Top Step # F00853
  I would recommend using your existing fender mounting hardware if you still have it, and as long as it is in good condition. Otherwise, you could use regular bolts and nuts. No specific hardware kit is available for the # F008553 fender, but holes can be drilled in the fender backing plate to suit your particular application.
  view full answer...
• Can Fulton Single Axle Trailer Fender with Top Step be Used for Both Left and Right Sides
  The Fulton Single Axle Trailer Fender with Top Step - Black # F008554 or Silver # F008564 for 14 inch wheels, or Black # F008553, Silver # F008563, or White # F008543 for 13 inch wheels are symmetrical so they can be used on either side of the trailer. Check out the pictures that some customers sent in where they used the same fender for both sides.
  view full answer...
• Will Fulton Black Plastic Trailer Fender # F008551 Fit with 5.30-12 Inch Trailer Tires
  The Fulton fender # F008551 is designed for use with 8 to 12 inch trailer tires. For the specific measurements of this fender, please take a look at the picture I have provided and compare them to the available space you have on the trailer to determine if there will be any fit issues with a 5.30-12 trailer tire. The diameter of a 5.30-12 trailer tire is 21.9 inches and, of course, it is 5.30 inches wide. A lot depends on the specific trailer design and how it is constructed. Based on...
  view full answer...
  
• Replacement Trailer Fender
  The Fulton Single Axle Trailer Fender with Top Step # F008553 is sold as a single.
  view full answer...
• Recommended Trailer Fenders With Steps For Bass Boat Trailer With 13-Inch Wheels
  I have attached a link to our trailer fender product page you can check out. We have fenders with the step on top of the fender like part # F008543 in white or part # F008553 in black. We also have fenders that are white with top and side steps like part # PF11X35W-2 for single axle trailers. This includes 2 fenders with mounting brackets. For black fenders with top and side steps I recommend part # CE19503-2. I also recommend the mounting brackets, part # CE26098G-2 to attach...
  view full answer...
• Availability of Plastic Trailer Fender for 13 inch Wheels
  We have plastic fenders for boat trailers with 13 inch wheels like the Fulton fender part # F008553 but the length dimension you mentioned doesn't match perfectly. The # F008553 has a C dimension of 29-1/4 inches and would be the closest thing we have to what you are looking for.
  view full answer...
• Availability of 29 inch Long and 9 inch Wide Trailer Fender with Back Splash
  The closest fender we have to what you requested is the part # F008553 which is 29-1/4 inches long, 9 inches wide, 12 inches tall and has the backsplash you are looking for as well. I attached a review video for this fender for you to check out as well.
  view full answer...
• Replacement Fender for Shorelander Trailer with Single Axle, 13 Inch Wheels
  For a fender like you described, you will want to use the Fulton Single Axle Trailer Fender with Top Step # F008553. This fender is designed to work with 13 inch wheels like those on your trailer. The # F008553 fender is made of black plastic and will provide you with a step on top of the fender. This fender is designed to be mounted with brackets like # PF775-BKT-2. I have attached a chart showing the measurements for this fender, as well as a review video of the fender. We do not offer...
  view full answer...
  
• Looking for Black Plastic or Steel Fender for 13 Inch Wheel
  We have a couple of fenders that would work for you, but they're just a little bit wider than the spec you mentioned (which shouldn't cause any problems.) The Fulton # F008553 is a black polyethylene fender that measures 9 inches wide, 29-1/4 inches long and 12 inches tall. This is a about 1 inch longer and wider than your existing fender. The closest match is the CE Smith pre-galvanized fender, part # CE17800G which measures 27-3/8 inches long by 8 inches wide by 11 inches tall. I've...
  view full answer...
• Can Fulton Plastic Fenders Be Painted?
  The Fulton Single Axle Trailer Fender with Top Step # F008553 can be painted. You would want to use some sandpaper and primer to prepare the surface prior to paining, but you can paint them to match your trailer.
  view full answer...
• Recommended Fender Bracket for Use with Fulton Trailer Fender # F008553
  The recommended fender brackets to use with the Fulton Fender part # F008553 is the Galvanized Steel, L-Shaped, Bolt-On Brackets # PF775-BKT-2. Without what kind of brackets you currently have on your trailer it's hard to say for certain, but most likely you could use them to install the # F008553 . I attached a couple review videos for you to check out as well.
  view full answer...
• Plastic Fender Recommendation for Sailboat Trailer with 24 Inch Diameter Tires
  I am assuming that the 24 inch diameter is of the tire on sailboat trailer. If this is the case, I have included a link to the plastic fenders that will work with this size of tire. One option is the Fulton Single Axle Trailer Fender with Top Step, # F008553. This high-density polyethylene fender is corrosion proof, impact resistant and able to handle temperature extremes.
  view full answer...

Do you have a question about this Trailer Fender?