To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Leaving tools or gear in the bed doesn’t have to mean leaving them exposed. The TruXedo Sentry Hard Tonneau Cover uses heavy-duty, leather-grain vinyl over 3/4" thick aluminum slats to block out rain, dust, and snow while shielding against impact and prying hands. Slam latches at the tailgate and mid-bed lock automatically when closed, securing your cargo when paired with a locked tailgate. Rubber weather seals keep water out, so what’s under the cover stays dry and clean in any season.
When you need the entire bed for hauling large or tall cargo, you can simply pull the release cables at either side of the tailgate and roll the cover toward the cab. Safety straps hold it tight so it won’t move while driving, and it stays low enough not to block your rear window or third brake light. The quick-release guides let you remove the whole cover without tools when needed, so switching from covered to open bed use is fast and simple.
The angled side rails are designed at 15 degrees so the cover sits just 1/2" above the bed rails for a flush, streamlined look. That low profile isn’t just clean—it helps reduce wind noise and drag while improving fuel economy. The black slats bonded to black vinyl create a smooth, uniform finish that keeps the truck’s lines intact rather than bulky or raised.
The industrial-strength materials take on UV rays, hail, and temperature extremes from -40°F to 120°F without cracking or fading. The aluminum slats are impact resistant and strong enough to support up to 400 lbs of evenly distributed weight when closed, giving this hybrid cover strength on par with a solid hard top but in a roll-up design.
Getting an even fit doesn’t have to be tricky. The self-leveling side rails clamp inside the bed rails without drilling and square themselves as you tighten them down. That means smooth rolling every time you open or close the cover and no need to re-align the rails later. Because the rails mount inside the bed, stake pockets remain free for tie-downs or other accessories.
Ratings & Reviews
This cover has been great over the past year! Very durable and easy to use. Only gripe is removing it as the latches are difficult to operate, but I don't need to do that often.
Super nice top at a screaming hot deal. So Happy, Thanks
Easy installation. Looks great.
Easy to follow instructions, done in 45 minutes. The role is heavy, especially if ya have longer bed, mine being 5’7” was easier. Looks great, very happy.
I’m very happy with this cover. It fits well, rolls up easily when needed and does a great job of keeping my cargo safe and dry.
I had to return the cover because turns out my box on my pick up wasn’t square then by the cabin was wider than the far end so the Tonnele cover kept falling through and I never could get it installed properly so I had to send it back I did get a partial refund but overall I lost over $150 on the transaction
My advice is make sure your box is square.
The quality of this product is very good. It fits perfectly on my Ram 2500 short bed. Admittedly, it took longer than I expected to install it but that was my fault. It helps to have two people working on it together. Once installed it worked exactly as advertised. Yes, I would recommend this item to a friend.
Installation was simple and the cover has held up well. It provides protection to everything under it, just as we expected. We would buy it again!
This is the second Tuxedo tonneau cover that I have had. My current truck has a drop in bed liner which makes for a tighter fit, but it looks good, seems to be solid, and is simple to open and close
I installed it after watching YouTube and it was quite easy! It was hard to lock at first but then I moved the rear clamps closer to the end/clips and it now locks without hitting the top. Wind does not vibrate it at all. Ran it thru the carwash and minimal water was in the bed-coould've been I didn't press down on the velcro sides to really seal it. Happy with quality!
I am still loving my cover. No one has tried to break it open to see what is inside. You have to open the Tailgate to get to the release straps. My son and I installed it fairly easy. Just a matter of lining everything up. Perfect for someone in Construction. My friend from long time ago has had his expensive tools stolen 2 times. So do not say the cover is too expensive!
I'm 80 years old and with help from my 73 year old wife, quite easily installed our new TruXedo Sentry hard roll up cover in under an hour. The product arrived well packed with all components easily identifiable. This is the neatest tonneau cover I've owned. It is solid, well designed and open and closes with little effort. It also looks great on my '23 Ram.
Fits nice with Ran boxes.
With a minor addition the six and one-half cover works well with a cross-box toolbox in my truck's eight foot bed. It also rolls back to allow access for the fifth-wheel hitch when I need that to haul our 5th-wheel trailer.
Great Product. Relatively easy install. Looks amazing.
I love this tonneau cover. The only reason it's 4 stars is that on installation, one of the tie down straps broke. TruXedo immediately replaced it. In the first month, the lip over the tailgate started peeling. TruXedo immediately sent me a second tonneau cover, free of charge. Now I have a spare. Even though I've had a couple of issues, this thing is awesome and sturdy. TruXedo's customer service has been amazing.
love the way it fits and looks. was easy to install. MY DAUGHTER AND i HAD IT ON IN LESS THAN 25 MINS.
Perfect fit. Looks great.
Overall this hard cover has held up very well. Provides greater access to truck bed versus folding covers.
This cover installed easily with a little help from my 18 yr old son. I opted for the vinyl (Sentry) over the fabric (Sentry CT) and I don’t regret that choice at all. The cover fits snug and gives truck a nice clean/sleek look. Only thing that was a minor issue was no primer/adhesion promoter is included. We will see if the seal provided stands up without it. I do have the factory spray on bed liner so I was expecting to see a little kit included. Otherwise, the cover is perfect!
Finally found a bed cover to fit my Nissan Frontier PRO 4X with factory utility rails .... pros at e-trailer provided the exact model I needed ... easy install, no issues.
Note: when working alone, close the tailgate and locate the side rails in place by compressing the rubber seals at each end of the rail. This holds the rail in place making clamp install very easy. This process also assures that holes are in alignment for cover installation...
The package received was previously opened before, it is likely a returned item, the hardware and brackets are missing. I hope e-trailer is going to help getting a new unopened complete set.
Disappointing!
So far so good. Installation instructions were clear. It take my a while to do the final adjustments at the tailgate so that it would lock. That being said, once I did that, operation is easy and I love how solid this roll up is.
Just love this Truxedo Sentry on my truck. It makes items in the bed of the truck way more secure than the canopy I had. So happy with my purchase!
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.