To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Soft tonneau cover keeps your vehicle's bed and cargo safe and dry. Roll up and remove for full truck bed access. Flush-mount and durable, matte black polyester and vinyl skin for a clean look. Automatic tension control maintains a tight fit.
Features:
The custom-fit TruXedo Pro X15 tonneau cover keeps your vehicles cargo safe and protected against weather elements. The soft cover rolls up in seconds to give you quick access to your truck bed, and features an extra-low profile design that helps to reduce wind drag while improving gas mileage. It also installs easily to the inside of the trucks bed rails, while still allowing access to the stake pockets.
The smooth, extra low profile cover does more than just catch your eye. The cover sits just 1/2" above your truck bed rails, which helps improve gas mileage. The unique, self-leveling design ensures that the rails are mounted properly, and the rear-mounted automatic tension control system allows the cover to keep tightly fitted to the edges of the bed in all weather conditions. Automotive-grade seals at the cab and tailgate keep dirt, dust, and water out of your trucks bed and off of your stored cargo.
The Pro X15 gives you full use of your truck bed. Simply roll the cover up and secure it behind the cab with included safety straps. This allows you to transport any extrusive equipment without having to remove the tonneau from your vehicle. Even when the cover is rolled up it doesnt block the cabs rear window, maintaining important visibility and awareness for the driver. The cover also mounts inside your truck bed rails, keeping most of the bed free for stored cargo while also allowing the use of stake-pocket-mounted accessories, tie-down anchors, rail caps, and bed extenders.
The cover is constructed of sturdy woven polyester fabric with a vinyl-coating, providing a stylish, matte-black appearance. The fabric resists dirt and dust, helping your cover stay clean longer. It also resists effects from extreme temperatures, UV rays, and color fading. It can be hand washed with mild soap and water or a trip to the car war wash would do the trick.
The Pro X15 installs easily with no drilling or special tools required. Simply clamp the tonneau cover side rails to your trucks bed rails, and attach the cover header to the tonneau rails at the cab using the spring-loaded latches. Secure the cover to the side rails with hook and loop fasteners as you unroll it, and latch it to the rails at the tailgate. Once the cover is completely unrolled and latched, close and lock the tailgate to finish securing your truck bed.
The Pro X15 is easy to operate. Just roll out the cover and press down on the rearmost slat at the tailgate to secure the tonneau in place. Industrial-grade hook-and-loop fasteners along the rails ensure secure fastening with no snaps or zip strips to mess with. To release the cover, simply pull the Quick Latch on the drivers or passengers side of the cover.
Ratings & Reviews
This is a great cover. It works perfectly with my Adarac bed rack. Installs easily and is made with premium materials. Functions great and stays surprisingly clean being that it is matte black. Haven't noticed any fading so far.
This is the 3rd vehicle I have installed tuxedo covers on. It is a quality product, with easy installation. It is great for keeping contents of truck bed dry and secure. The low profile really makes the truck look amazing . Well worth the price.
Very happy with this cover. Seals out water very well. Easy to use. Open tailgate, flip the lever to raise the seal. Put in or take out cargo. Close tailgate. Push cover down to re-lock. Easy Peasy. Looks same now as when new. Stays tight in hot weather. Not too tight in cold weather.
Great as usual, can’t believe how fast we received it, thanks again.
Fits great, looks great. Keeps the rain and snow out.
Absolutely love it, never thought I would switch from my previous cover mfg until I tried this one. Works great in all kinds of weather and no issues of any kind. Would recommend this cover to anyone looking to purchase one.
Fits perfect and the Velcro is solid.
I have bought nothing but TruXedo tonneau covers because they are the best! And this new Pro X15 is amazing. It's been on my truck for over a year now and made it through the harsh Michigan winter/snow with ease. I would buy with 100% confidence!
After I completed my order of a replacement tonneau cover fabric, etrailer did an amazing job making sure my order was going to be exactly what I was needed. I received a couple different emails requesting additional information from me. I was also very well informed of my package AT ALL TIMES!!! I could look every day and see where it was and when it was going to show up. The cover fits PERFECT!!! Couldn’t be happier with my Truxedo X-15 replacement cover. Thanks etrailer!!!
I absolutely love it! Keeps my 5th wheel hitch out of the weather and looks great doing it!
The tonneau that came was the proper one. Half the stuff I have ordered from other vendors has been the wrong part. Product was prompt and in good condition. I have never been let down by ETRAILER, Thank you.
Easy install and great product. Second vehicle with same cover
Great cover. Super easy to install on my new Ridgeline. High quality, and I love the matte polyester topside of the cover. Looks and works great!
Easy ordering and fast shipping. Well made product. Easy installation, just read instructions and watch videos.
I purchased this Tonneau cover for my new truck and couldn’t be happier. Being able to roll it up all the way to the cab is what makes it perfect to have full access to your bed. I couldn’t recommend it more.
The cover seems good. But the latch does not work with Jeep Gladiator. I have ordered the low profile latch. Hopefully it will fit in the tight space.
I love the look , but the fit for this 2026 ram isn’t the best at the tail gate , and I think there should have been a little more efforts put into the seal designs on the ends .
I have this brand on 2 of my older GM trucks and I love them . I’m not totally dissatisfied , I just think there could have been more design out into this cover for the money it costed , and to keep things sealed .
Because I’m pretty sure when it rains , there will be some water get in at the tailgate seal area and possibly the front corners of bed .
But the material quality looks and feels to be really nice . Just the fit design needed more attention .
If I were to spend the money again , and knowing what I know now ,I would be looking hard into other brands to see how their designs are .
This is why I give this cover a 3 star rating , because it has its pros and cons . I love this brand but different model on my older trucks , and that’s the reason I bought this cover .
And I would have like to have had a little more lip to go over my bed sides , this part of the cover also is a little shy on design as well .
It does look good on the truck , and it doesn’t stick up , it looks pretty sleek as far as that goes .
But this is my take on the overall
Easy install and still look great after a year.
Well satisfied with our cover. It was easy to install and operate.
In some ways this may not be a representative review, since we keep the truck in the garage and don't put many miles on it. But so far this has been an excellent cover. It was easy to install, and it does a good job of sealing the bed from the elements. The matte finish looks nice, and there's minimal fluttering of the fabric when driving. Removal is also simple. A great value all around.
Really like the X15. Was extremely easy to put on. Took maybe 25 mins. Rained the first day I had it on. Bed was completely dry.
I was very pleased with the quality, installation instructions and ease of installation for my new TruXedo Pro X15 tonneau cover.
The cover in general is great.. However, I am having a problem with the cover being too tight against the tailgate lid. Why ????? Problem: When I get the cover in place with the clip on the left down and snapped in place, I can not open the tailgate of my Ford F-150 to open either with the key fob or manually by pushing the tailgate button on the gate itself. Every time I try, the gate unlocks (click) and then locks again within less than a second. I have to reach under the Velcro side and release the clip to allow the very end of the cover to relax and allow the tailgate to open. I believe there may be too much pressure down on the tailgate lid across the back to allow the tailgate to move automatically. Is there any dealer near me that could look at the installation and tell me what's wrong I love the cover, but use it in a mostly loose position or rolled up. I would appreciate any help you may be able to offer. Thanks
Katrina B.
4/27/2022
I have contacted the manufacturer and they said that these kinds of problems stem from having the cover installed too far back. You will need to install the cover closer to the cab, and have it compressed 50 by the cabin. They said that your situation can also be resolved by making sure that the tailgate is closed during installation. This will help make sure that the rail is even and not too far back.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gene
9/8/2023
It is a very nice looking, quality cover, however it is very hard to get and keep the wrinkles out of the front and back. Also it is noisier on the road than other covers with more traditional vinyl.