Features to know about

Secure Cargo in Any Position: Locking Retractable Cover

It’s hard to feel confident leaving tools or gear in the bed when a cover can be pried open or cut. The RetraxONE XR uses a built-in key lock and a pop-up handle so you can secure it at any point along the rails. You can latch it partially open to cover gear at the front while keeping space for bulky items in the back. When closed and locked with your tailgate, it becomes a sealed, hard barrier that deters theft and keeps everything out of sight. The sealed ball-bearing rollers make it easy to open and close with one hand, without straps or snaps.

Year-Round Protection: Lexan Polycarbonate Construction

Covers can crack, fade, or stiffen when the weather turns extreme. This one is built from high-quality Lexan polycarbonate with 5/8" thick aluminum I-beams every 4-3/4" for strength and impact resistance. It handles temperatures from -50° to 200°F without swelling, cracking, or fading. The matte black finish resists scratches and UV damage, and the overlapping weather seals and foam strips block moisture, snow, and dust. Two drain tubes in the canister channel water out, so the cover stays dry and reliable through any season.

Full Bed Access Without Removal: Smooth Retracting Design

When you need the whole bed, this cover glides open in seconds. The sealed ball-bearing rollers let it retract smoothly into a compact canister that sits at the bulkhead, leaving more space below thanks to its angled bottom. There are no hinges, joints, or springs to seize or wear out, and the spiral track system keeps the panels from rubbing on themselves. It’s maintenance-free, easy to use, and keeps operation fast and frustration-free.

More Room for Gear: Built-In T-Slot Rails

If you run racks or overland gear, the integrated Trax Rail System is a huge plus. The accessory T-slots in the side rails let you mount T-slot-compatible ladder racks or crossbars (sold separately) from Thule, Yakima, or Rhino without affecting how the cover functions. You can haul bikes, kayaks, or rooftop cargo above the bed while keeping the cover closed and your gear locked away underneath.

Sleek Look and Simple Setup: Low-Profile Clamp-On Design

Some hard covers look bulky or require drilling to install. The RetraxONE XR mounts just 1" above the bed for a low, flush profile that blends cleanly with the truck’s lines. The rails clamp on—no drilling needed—and the cover arrives pre-assembled in the canister, ready to drop in with a few bolts and drain tube connections. It’s a solid, streamlined setup that adds security and function without extra hassle.