bing tracking image
  1. Tonneau Cover
  2. BAK Industries
  3. Fold-Up - Hard
  4. Flush Profile - Inside Bed Rails
  5. Rack Compatible
  6. Aluminum
BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
BAK Industries

BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish

Part Number: BAK448333
In Stock
$1,299.99
Retail:$1,383.61
You Save: $83.62
Tonneau Cover

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
Premium folding tonneau cover is perfect for your newer model truck. Attractive, matte black aluminum is UV resistant, so it will always look great, even if your truck sits in the sun every day. Shuts with tailgate open or closed. Great Prices for the best tonneau cover from BAK Industries. BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish part number BAK448333 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (148)
  • Q & A (0)
  • Videos (2)
  • Photos

BAK Industries Tonneau Cover - BAK448333

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Keeps Gear Protected: Hard aluminum panels lock with the tailgate to secure your cargo.
  • Full Bed Access: Tri-fold design lets you open part or all of the bed in seconds.
  • Stays Dry in Rain: Rubber seals and drainage system channel water out of the bed.
  • Looks Clean and Low: Matte black aluminum sits flush for a smooth, factory look.
  • Built to Last: 1/2" thick aluminum panels support up to 400 lbs evenly distributed.
Made in USA

Features to know about

Strong Bed Security: Automatically Latching Aluminum Panels

When you want your cargo safe from weather and theft, the MX4 gives you solid peace of mind. The folding panels automatically latch as they close, and when the tailgate is locked, the bed stays secure without needing any extra keys or locks. Each panel is made from rustproof, ½" thick aluminum with a premium density foam core, so it holds up to 400 lbs of evenly distributed weight without flexing.

Full Bed Access: Tri-Fold Design with Prop Rods

You don’t have to choose between hauling space and protection. The tri-fold design opens in sections so you can access part or all of your bed in seconds. When you need the bed completely open, just fold the panels up against the cab and use the built-in prop rods to hold them in place while you drive. The integrated buckle system secures the cover whether it’s folded, flipped up, or closed.

Clean, Low-Profile Look: Inside-Rail Mounting

Some covers sit tall and interrupt the truck’s lines, but the MX4 keeps things sleek. It mounts inside the bed rails for a flush profile, leaving stake-pocket mounts and side-rail accessories open for use. The aerodynamic shape helps reduce drag, and the matte finish matches the rail caps for a clean, factory look.

Year-Round Durability: Matte Black, UV-Resistant Finish

Sun, snow, and rain can wear out weaker covers fast. The MX4 uses aircraft-grade aluminum panels finished in a matte black coating that’s resistant to scratches, scuffs, and UV rays. The rubber seals and drainage system channel water away from the bed, keeping gear dry through storms and car washes. The aluminum rails are black powder coated and rustproof, built to handle years of use.

Simple Setup: Clamp-On, No-Drill Installation

Getting this cover installed doesn’t require special tools or drilling. The frame rails clamp to the inside of the bed rails, and bolts secure the hinge rail to the frame. Once tightened down, everything aligns square and solid, ready for daily use without extra adjustments.

Specs

Weight and Capacity

  • Weight capacity: 400 lbs evenly distributed

Configuration

  • Number of folding panels: 4

Warranty

  • Limited warranty: 5-year

448333 BAK Industries BAK Flip MX4 Hard Folding Truck Bed Cover

Replaces 48504

Installation Details BAK448333 Installation instructions

This Product Fits The Following Vehicles




Video of BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for BAKFlip MX4 Hard Tonneau Cover 30 Second Overview

Katie Osborne: Katie Osborne with trucks hero here to tell you what makes this Backflip MX for the number one selling hard truck bed cover on the market. The aluminum encased panels provide security and weather protection when closed. And when folded open, it provides full bed access, plus you can then drive it around town by securing it with a prop rod. And of course, this low profile matte black finish looks great on any truck.

Ratings & Reviews

4.6

148 reviews
5 Stars
(110)
4 Stars
(24)
3 Stars
(10)
2 Stars
(1)
1 Star
(3)
Review Sort Icon
by:
I love how this tonneau cover works. because it allows use of almost the entire bed of the truck when it's fully open. I was a little disappointed with the clamps for installing the side rails, as they didn't seem as robust as the clamps in the cover I bought for my last truck. However, I am happy with its operation, and the fact that the truck bed is a locked compartment when I lock the tailgate.
Claire H. profile picture
Etrailer Expert

Claire H.

7/14/2026

Thanks for the great feedback! We're glad you're enjoying the tonneau cover and that being able to use almost the entire truck bed when it's open has been such a big plus. It's also nice knowing your gear stays secure when you lock the tailgate. We appreciate you mentioning the clamps too—that kind of feedback is always helpful. Thanks again, and we hope you keep enjoying your new cover!

by:
2022 Ford F-350 Super Duty
Bought it used.. I asked if it was complete undamaged.. It arrived complete including a scratch on the inside cover.. I'm glad it wasn't on the outside cover. Shipping was quick. Installation was fairly straight forward
by:
Ordered the BAKFlip MX4 for my son on 12/15 after calling to verify the tonneau would arrive by Christmas. Then received an email that said "Your order has been forwarded to one of our partners for direct shipment to you" and never received another shipping update or any tracking info. Finally on 12/22 I emailed Etrailer.com who told me they didn't know when I would get it. The Tonneau finally arrived on 12/29, 3 days after my son returned to California (he drove his truck, 2100 miles). He won't be back till next Christmas so I have to figure out how to return this product. I had several other buying options to get this here by Christmas, but went with Etrailer because of their reputation. This will be my last purchase from Etrailer.com.
by:
Overall, I am very pleased with my BAKFlip MX4. It has held up well after 1 year. It works well and looks good. It matches my matte black accessories and trim. It was fairly easy to assemble but I did have some tight fitment issues near the cab where the cover connects to the rail. I really like the security of the hardtop and access through the tailgate. Water is generally kept out, but sometimes there are water drips near the tailgate depending on the angle parked. So this cover keeps the bed *mostly* dry.
etrailer was very fast to deliver my cover, and it came in good condition.
by:
The bed cover has been great so far. Followed the instructions and took my time adjusting it and it has been working well. Keeps the bed dry and looks good. I did have to order an extra kit to get enough rail clamps. Once I put the extra clamps on it feels much more secure. For 8ft beds they need atleast 8 to 10 clamps, not 6. The cover has been working in that I don’t have to uncover the whole bed to use it. I just need to open up as much as I need at the time.
by:
So after a year I am still loving this bed cover. Had the fiberglass version for my 2013 F-150 and loved it as well, that's why I purchased this one for my 2019 Super Duty, it was also the first accessory I purchased for it because I was so used to my other one and knew I couldn't live without it. I never installed the drain tubes on either covers and still haven't had water get it my bed. Also the folks at etrailer are always awesome! Thanks again!
by:
Pontiac Trans Sport Van
BAKFlip MX4 is a great addition to any pickup. It allows for secure transport of material, keeping it dry in bad weather and yet readily accessible with the flip of a panel. It also keeps the weather away from your 5th wheel hitch. Can be left on when towing.
by:
I have been using this cover for almost a year now, and am very pleased with it. It looks and fits great, and it is secure and keeps most of the bed dry in the rain. A couple of rubber trip bits have needed some improved securing, and I used a little RTV so it was easy. I drove it across the country round trip last summer and it was perfect. I would recommend this cover for a great-looking and pretty secure cover. Finally, it is easy to fold forward when it is time to haul loads taller than the bed rails.
by:
Purchased this BAKFlip for my new 22 RAM Classic 1500. Installation went well, instructions were good to follow, and it fit perfectly. One of the plastic hold down clips had a manufacturer defect with excess plastic mold residue inside the clip that prevented it from properly working. I sent an online warranty claim explaining the problem, and a new clip was sent to me in a reasonable amount of time, and it worked fine. After one year of using the cover, I am very happy with it. Everything functions as it should, and it is very versatile. While it is not 100% watertight, I mostly notice a small amount of leakage around the tailgate seal after washing the truck. Under normal rainy weather, there is no leakage, and we get plenty of rain in the PNW. My four-star rating rather than a 5 star is only because of the manufacturer defect and the curling of one of the rubber cushions on the underside of one of the panels where the adhesive holding it on the edges has not held up under the hot weather (with the black color, when the sun beats down on the cover it gets pretty toasty inside the truck bed with the cover closed). I am thinking that should be an easy fix by applying some good adhesive and taping in place until the adhesive cures. Just haven't gotten around to doing it. Again, really like this cover. Would recommend it to others, and if I ever have a need for one in the future, would definitely not hesitate getting another BAKflip.
Rob profile picture

Rob

6/4/2025

The BAKFlip after 2 years is still functioning great. I fixed the curling cushion by applying some strong adhesive to the spots that had detached, taped it in place and let cure for a couple of days. That solved that issue. Would continue to recommend the BAKFlip to others.

by:
Great tonneau cover. Fits as it should.
by:
2017 Dodge Ram Pickup
I installed the BAKFlip MX4 in my RAM 2500 Crewcab has the 6' 1/2 short bed, drived 300 miles now. good product, open and close the tailgate without lifting up the cover
by:
dodge Ram Pickup
Great fit on a Ram 2500 long bed. Everything stays dry on the inside.
by:
The cover functions ok. The tailgate leaks quite a bit. The manufactured edges that where cut were sharp and not painted or treated. The weather strip along the edges has already discolored/faded. Disappointed in the fading and less than ideal sharp edges. Somewhat expected leaks, but not this much. Average at best rating, especially for the price.
by:
Install was smooth and got a timely note when it was completed
by:
I am a huge fan of the BAKFlip. The installation was pretty straight forward and easy. Anybody with moderate mechanical ability can install. I think it took less than 2 hours. I live in a heavy snow area and had more than 24” of snow on it at one point and the product performed flawlessly.
by:
Excellent product! Wait time was crazy but manufacturer is to blame on that one!
by:
I replace a camper shell with the tonneau cover because it is easier to remove when I want to put my pickup camper on the pickup. I am very happy with the cover and am glad I made the switch.
by:
the bedcover finally came in.
Few pictur
es of it installed.
by:
I really love the bakFlip cover. It locks up all my stuff when we are on the road. I really like the looks too.
by:
I own three of these on three different trucks. The two I purchased this year and last year are not as good quality as the one I purchased in 2023.For the price they are feeling pretty cheap now and parts are falling off. Latch covers and rubber par to rest the top on when folded up have fallen off on both of the covers. I will not be buying these brand covers again.
by:
Solid performance. Only issue is with the glue holding the pads is failing
Jenny N. profile picture
Etrailer Expert

Jenny N.

4/4/2022

You mentioned that the glue holding the pads are failing. I wanted to see if you would be able to send a picture to show the locations.

by:
Love the MX4 ...Took a little longer to install but looks great...
Sherry H. profile picture

Sherry H.

5/19/2020

Its still amazing. Works just like its suppose to glad I made the purchase.

by:
I have owned this cover for over a year and it has been excellent. It keeps the bed fairly dry as expected and I have had no mechanical issues with it as it still performs like new. I would say the only improvement I would suggest is better foam weather striping for the front of the bed as the original never stuck to the spray in liner very well and eventually came lose and then I just swapped with some similar weather striping I bought locally.
Jason profile picture

Jason

12/11/2023

The cover is still excellent and keeps our items dry and secure on those road trips. I stand by my initial review and still wish the weatherstripping would stick the the spray in liner better but its only been a minor annoyance that hasnt resulted in any water getting into the bed.

by:
The cover has been great. I would buy it again. The only gripe from me is that for some unknown reason, one screw rusted ( as shown in the attached photo ). Why one, and not the other 3 ?? who knows...
by:
2017 Ford F-250 Super Duty
It's a straight forward assembly but photos of the assembly steps would be better than the illustrations.
NOTE: This model allows you to open and close the tailgate without lifting up the cover. The other models require you to lift the cover so the tailgate won't damage it.
Martin Z. profile picture

Martin Z.

9/19/2018

Great cover holds up really well, no problems

25
148
true
Show More Reviews

See what our Experts say about this BAK Industries Tonneau Cover

  • Hard Tonneau Cover Compatible With Thule TracRac SR for 2015 GMC 2500HD w/6.5 Bed
    From your picture, it looks like this is possible and might not affect the use of a folding hard tonneau cover like the BAK Flip MX4 # BAK448333 or the BAK Flip F1 # BAK72122 , but the main issue may not be the rail as much as it is the slanted profile of the ladder rack load bars and them interfering with the folding of the tonneau. You may be able to slide the ladder rack around and make it work, but I'm not sure that it really provides a convenient working situation. I'll also add that...
    view full answer...
    Image 1 for
  • What Ladder Rack Do You Recommend For My 2021 Ford Ranger With A BAKFlip MX4 Tonneau Cover
    The BAKFlip tonneau covers are a good choice. I am not sure what size truck bed you have on your 2021 Ford Ranger, but if you have the 5' bed you would get the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish, part # BAK448332. The BAKFlip MX4 for the 6' bed is part # BAK448333. My recommended ladder rack, that is black and compatible with your 2021 Ford Ranger is the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs - Matte Black, part # A39ZR....
    view full answer...
  • Retractable vs. Folding Hard Tonneau Cover For 2021 Ford Ranger
    That's a good question as there are a few key differences between the retractable hard tonneau covers and the folding hard tonneau covers for your 2021 Ford Ranger. The biggest differences are ease of use, security, and how they impact your bed size. First, here are the part numbers for the RetraxPRO MX and BAKFlip MX4 that fit your 2021 Ford Ranger, depending on its bed size: - RetraxPRO MX Hard Tonneau Cover - Retractable - 5' Bed # RTX56FR or 6' Bed # RTX36FR - BAKFlip MX4 Hard Tonneau...
    view full answer...

Do you have a question about this Tonneau Cover?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Dustin K
Video Edited:
Dustin K
Employee Zach D
Video Edited:
Zach D
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Mark S
Written by:
Mark S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924