Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2017 Ram ProMaster 1500
We'll connect you with nearby partnered installers who know this exact setup.
BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl
Part Number: BAK39131
In Stock
$1,479.99
2017 Ram ProMaster 1500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (46)
- Q & A (0)
- Photos
BAK Industries Tonneau Cover - BAK39131
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Hard Cover Keeps Everything Out: Locks with tailgate so gear stays safe and dry.
- Full Bed Use: Rolls up in seconds for hauling large items without removing the cover.
- Strong Hybrid Build: 1/4" aluminum slats under vinyl skin support up to 400 lbs evenly.
- Low-Profile Look: Flush fit inside bed rails gives a clean, aerodynamic appearance.
- 10 Minute Install: Clamps on with a wrench—no drilling needed.
Features to know about
Secure Cargo Protection: Aluminum and Vinyl Construction
The Revolver X2 is built with 1/4" thick, aircraft-grade aluminum slats covered in textured black vinyl. This combination gives it the strength of a hard cover with the sleek, soft look of vinyl. The rigid slats can’t be cut through like a standard soft cover, and the UV-resistant skin keeps it looking sharp while resisting impacts, sun, and weather. Rubber seals line the rails and tailgate to help block water intrusion, keeping your gear protected in any condition.
Full Bed Access in Seconds: Roll-Up Hybrid Design
Most hard covers need to be removed or folded against the cab when it’s time to haul big items. With the Revolver X2, you just pull the cable release and roll it forward. The aluminum slats hinge smoothly so the cover rolls up evenly every time. Nylon straps with plastic buckles hold it behind the cab, and rubber bumpers keep it from touching your cab while you drive. Because it mounts inside the bed rails, you still have full use of stake pockets and tie-downs for racks or anchors.
Clean, Low-Profile Fit: Flush Inside Bed Rails
Some covers sit high above the rails and look bulky. The Revolver X2 sits nearly flush inside the truck bed rails for a clean, streamlined look. The aerodynamic shape reduces wind drag to help improve fuel mileage while keeping a factory-style finish that blends right into the truck’s lines.
Simple One-Person Operation: Automatic Latching System
Rolling the cover closed or open can be done easily by one person. When closed, pressing down on the rear slat at the tailgate automatically locks the cover along both sides. The side rails rotate downward to secure every slat across the length of the bed—no Velcro or snaps needed. When the tailgate is closed and locked, the cover is sealed tight for added security. To open, just drop the tailgate and pull one of the two release cords to unlatch both sides at once.
Quick, No-Drill Installation: Clamp-On Rails
Installing the Revolver X2 doesn’t require drilling or complicated alignment. The aircraft-grade aluminum rails clamp directly to the inside of the bed rails and use mounting plates and pre-installed shims to ensure proper positioning. Bolts secure the front hinge rail at the cab for a snug fit. Once installed, you get a solid base that stays square without constant adjustment—ready for everyday use right away.
Specs
Construction and Materials
- Material: Heavy-duty aluminum and vinyl
- Aluminum slat thickness: 1/4"
- Aluminum type: Aircraft-grade, rustproof
- Finish: Black powder coat
- Vinyl skin: UV-resistant, textured black vinyl
- Reinforcement: Gusset-reinforced levers
- Seals: Matte black rubber seals
- Underside protection: Felt strips and rubber bumpers
Weight and Capacity
- Weight capacity: 400 lbs of evenly distributed weight (when rolled out)
Design and Operation
- Design type: Roll-up hard tonneau cover
- Profile: Ultra-flush, low-profile design (inside bed rails)
- Operation: Roll-up design with pull-cable release
- Locking system: Rotating side rail tooth and tailgate latch engagement
- Security: Cover and truck bed secure when tailgate is closed and locked
Installation
- Installation type: No-drill
- Mounting: Frame rails clamp to inside of truck bed side rails
- Included hardware: Mounting plates and bolts for front hinge rail
- Adjustment: Slotted brackets with pre-installed shims and spacers for alignment
Warranty and Origin
- Warranty: 3-Year warranty
- Country of manufacture: Made in the USA
39131 BAK Industries BAK Revolver X2 Hard Roll Up Truck Bed Cover
This Product Fits The Following Vehicles
- 2019 - 2026 GMC Sierra 1500 6-1/2 Foot Bed
- 2022 - 2022 GMC Sierra 1500 Limited 6-1/2 Foot Bed
- 2019 - 2026 Chevrolet Silverado 1500 6-1/2 Foot Bed
- 2022 - 2022 Chevrolet Silverado 1500 LTD 6-1/2 Foot Bed
Ratings & Reviews
4.4
46 reviews
by:
Bob B
11/21/2016
2003
Chevrolet
Silverado
The rollback cover is excellent. It is designed well, and went on my 2003 Silverado easily and it fits well. The only negative I have with my new cover is when it arrived from the manufacturer (BAK), it was full of aluminum chips. As I unrolled it to install it they were wrapped into the cover. I was getting aluminum chips everywhere. The cover had them rolled in the fabric cover, I got them on/in my hands, and on the painted surface of my truck. That was my only concern. eTrailer.com is to be commented on their commitment to customer service. They kept me informed on the progress of the tonneau build continually. Thanks to all at eTrailer.
by:
James
01/16/2018
I like the idea of this cover rolling open or closed and the fact it locks when closed. Problem is the plastic guides that push into the aluminum rails do not stay in place. When rolled open and strapped down bouncing down highway the weight of the cover pushes these plastic guides out and allows seal to be damaged and to come out of its grove. I had to insert pieces of wood into the track to hold guides in place at front of track. I pull a 44 ft toy hauler around USA so cover stays rolled open for weeks at a time. The weight of rolled up cover smashes the guide pieces out of place. In the picture that’s paint stir sticks with foil tape on them so they stay dry.
by:
FREDERICK_C
08/02/2019
Overall I'm satisfied with the product, but for the price I expected a little better attention to detail. The fit and finish leaves something to be desired. All the parts are just cut and are not finished or cut evenly for that matter (see pics). It gives the overall feeling of a hastily finished product. Plus I've already to replaced some parts due to breakage. Fortunately they were rreplaced free of charge. But it does the job and fits my needs, so I'm giving it 3 stars.
by:
Keith C.
02/29/2016
2013
Nissan
Frontier
I ordered a BAK Revolver X2 Hard Tonneau cover for my 2013 Nissan Frontier pickup truck. Navigating the website was easy, I liked the price and the free shipping that were offered. I immediately received tracking information for my item so I knew what to expect. The item arrived on time and was professionally packaged and undamaged during shipment. The installation instructions were easy to follow and the kit included everything necessary to complete the installation, which took approximately 30 minutes. The cover looks great and works great. I am a very satisfied customer.
Keith C.
3/12/2017
Hi Laura - I am still pleased with my BAK bed cover. I dont like it quite as well as the previous version I had on my other 2013 Nissan Frontier truck which got stolen, hence the new cover, but I am still pleased with the product. The new cover doesnt roll or latch quite as smoothly as the old one, but it still works well. They also slightly changed the clips for anchoring the rolled up cover, and I find them harder to clip in and maintain tension on the strap, but again they do work. Thanks for following up.
by:
Sean M.
04/10/2019
Great tonneau cover! It's amazing how easily a well made product installs. I replaced my soft folding IMPORTED tonneau cover with this sweet piece and I can honestly say I now understand the difference in price. The Revolver X2 fits flush, looks great, closes securely, and just makes me feel a little cooler knowing it's back there ( I need all the help I can get). Bottom line, I was apprehensive spending so much for a tonneau cover but now that I did I will shout from the rooftops "YOU GOTTA GET ONE OF THESE REVOLVER X2s!" etrailer is a no-brainer as well, you can buy BAK tonneau covers from dozens of other retailers but I know etrailer, I trust etrailer, and I know if there's ever a problem (which I doubt there will be) etrailer will be there to fix it.
Sean M.
4/12/2020
Its still holding up well and it looks as good as it did the day I installed it. I have no regrets about making this purchase.
by:
Kyle R
05/21/2019
Toyota
Tundra
I couldn't be more pleased by this tonneau cover except if they found a way to make it magically disappear into the cab when I want to use the whole bed. It did its job throughout both summer and winter, keeping snow and rain out of the bed of my Tundra. By virtue of its unique rolling design, it's also one of the few options compatible with my TracRac: I can fully roll and unroll it no matter where the racks are placed.
Kyle R.
5/22/2020
My judgment has not changed. This cover is still excellent. If I ever get a different truck, this will be among my first accessory purchases.
by:
Robert
02/15/2026
Easy to install and works better than expected!
by:
Deborah Debbie
02/26/2025
It’s a great fit on our Ford Maverick. It is very easy to open up when we need to haul larger items and very easy to close when more room is not necessary. We are extremely happy with this cover and etrailer.com.
by:
Martin
03/03/2019
2018
Honda
Ridgeline
Clean look and easy to use. Still very satisfied with my purchase after 1 year. I installed it on a 2018 Honda ridgeline. My only complaint is when I purchased the product, it took them 3 delivery to provide the right attachment parts for my vehicle. Poor workmanship from the manufacturer. This problem as nothing to do with etrailer, which I'm happy with.
Martin H.
3/4/2020
Well, not so happy with the product. The carpeting fell off on the underside of the cover. Also the right side of the cover towards the tailgate shrank. Its been a few months since I started to have those issues and should of contacted you earlier for warranty. Hopefully its not too late for a warranty claim.
by:
Mike
12/31/2018
We bought (2) of these covers a year ago and would definitely highly recommend them. This is a well thought-out, nicely featured and well designed product of excellent quality. In the past we used Velcro strip hold-down "tarp-type" Tonneau covers in the past and will never go back. These covers roll up effortlessly and very quickly compared to the Velcro type. And, (as long as you keep the lock-down bar & track clean) they just as effortlessly roll out, lay down, lock down, and stay down - no stretching and having to take time working to get the tarp tight so that it doesn't "flap" in the wind. Wonderful product.
by:
Brent
12/16/2024
This is the worst tonneau cover I’ve ever dealt with in my life. The latching system is complete garbage. I have it adjust as far back as it can go and it does not leave the latches closed. You hit one bump one the road and it slides off the latch and the sides come up with any little gust of wind. I am currently on my 4th warranty claim with them in 11 months second full cover replacement. Wish they would just give me a refund.
by:
Timothy
12/28/2018
I am really glad I bought this cover. I looked and looked and ended up with this hardtop aluminum roll-up cover. It was easy to install, fits well and is secure. I am able to roll it up and snap it down and still pull a fifth wheel without having to remove the cover, a big plus.
My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.
My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.
by:
Rod C
02/17/2016
I purchased both the Bak Revolver 2 Tonneau and the B & W adapter for my companion 5th wheel hitch from trailer.
Both the product and service was great
Both the product and service was great
by:
David
01/29/2019
The roll up cover has performed very well in cold temperatures and warm. The top is water proof even when sprayed at the car wash. I like the security provided when the tailgate is locked. Overall very happy and would purchase this again.
by:
Logan
07/22/2018
2016
Chevrolet
Silverado 3500
Secure straps for when the tonneau cover is rolled up ripped out of the washers holding to the frame. Tarp pulled away from rubber seal causing water leak. Latches on the side of the cover dont always latch into the track.
by:
Larry
09/09/2022
I have found the cover easy to install. It still works fine 1 year later. It is easy to roll up using one hand. The only problem I experienced so far is occasinal failure of the wire to release the cover on the driver side of the cover when operatred from the tailgate on the passenger side. Its otherwise been a perfect product keeping even the worst rain and snow out of the back of my pickup.
by:
Ed C.
08/30/2017
GMC
Sierra
This BAK RevolverX2 tonneau cover is a high quality product that has performed well on my GMC Sierra 2500HD, it keeps my cargo safe, relatively dry and I save fuel. what more could ask for in a product.
by:
Ronnie E.
06/08/2020
I purchased this cover about a year ago for my 2019 Nissan Titan. I was happy with the appearance, it makes the truck stand out like no other. I can store things in the back, like luggage when traveling and it is secured and it will not leak. The cover itself is pretty sturdy, I have sit about 100 Lbs. on it and it doesn't bow in. I have the leather edition and it is easy to clean. It looks new even after a year, But maintenance is required to keep it looking good. Just keeping it clean and leather conditioner keeps it looking spectacular.
by:
Matt
11/21/2020
Perfect for the hard working truck fans! Great quality for the money! I love the fact that I can completely conceal my tools and gear without sacrificing the full use of the truck bed! Highly recommend!
Matt
11/22/2021
Couldnt be happier! Great quality product!
by:
Adam
07/11/2023
I have had this cover for one year and I would not buy it again. I read the reviews about how terrible this design is in climates that has freezing temps, but I live in New Orleans so freezing rain and snow was not a concern.
Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.
Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.
Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.
Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.
Jenny N.
7/17/2023
I am sorry to hear that this cover is not working out for you. Would you be able to send a picture of where the vinyl is separating from the aluminum?
by:
Byron S
10/18/2020
Love my BAK Tonneau cover. If there was one thing I've had an issue with is in the winter the track can freeze down and stop you from opening the cover. But other then that I am very happy with it.
by:
Tom M
04/20/2021
The felt-like lining that lies on underside of cover (and acts as cushion for rolling?) had bad glue job. This material came off in under 1 year. Appears that the glue was not meant for hot weather, as it came off in summer heat. Disappointed. Mfg website does not provide instructions on what glue to use to reattach, so had to experiment to find glue that would work to reattach. Perhaps in future they should use mechanical attachment instead of glue method...
by:
js
03/01/2017
2008
Chevrolet
Silverado
The only issue I've experienced with this cover that I was not pleased with was it blew up from one corner during a very strong crosswind and several of the plastic rail clips broke. I consider it an anomaly since its never happened again. BAK sent me replacement parts at no cost. The repair was simple.
On the positive side the cover gives you additional security from theft due to its construction. It's expensive but I feel worth the money, especially when protection of valuable cargo is needed.
On the positive side the cover gives you additional security from theft due to its construction. It's expensive but I feel worth the money, especially when protection of valuable cargo is needed.
by:
John
05/01/2024
This is the best tonneau cover I have ever owned .And I have had several different type .It has some small leaks but the only one that I had that didn’t covered the bed rails.
by:
Will B.
10/13/2025
I question whether it's a genuine Revolver product. The fit is very poor. The quality is bad. It's not my first Tonneau cover and the one for my other truck is the genuine product. I feel this is a knock-off. There is a significant indicator also - it doesn't contain the Revolver label.
Nick S.
10/20/2025
I am sorry to hear about your experience with this cover. It is a BAK industries product that makes the revolver covers, did your not have the logo on the left side by the tailgate? What kind of truck did you install this on?
25
46
true
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Cover
- Tonneau Cover that Can Fit 2024 GMC Sierra 1500 with Thule TracRac SR Ladder RackHey John, so the BAK Revolver tonneau covers are the ones that were designed to work with the TracRac SR sliding ladder racks like you mentioned. I am pretty sure you have a 2024 GMC Sierra 1500 but I am not sure your bed length which is needed to pick out tonneau cover. If you have a 5.5 foot bed you'd want the part # BAK62VR If you have a 6.5 foot bed you'd want the part # BAK39131 If you have an 8 foot bed you'd want the part # BAK39132 The Revolver is the only cover that is narrow...
view full answer... - Are REV And BAK Tonneau Cover Rails Interchangeable?BakFlip makes the REV tonneau covers and they are identical aside from the name, as far as I know from the information I was able to gather. The rails should be interchangeable, assuming you use rails from the identical versions of each brand. It looks like you were interested in the BAK X2. This is one of their more popular models due to the fact that it is durable like a hard cover but rolls up like a soft cover. For the 2020 GMC Sierra 1500 you would want # BAK39130 for 5-3/4' bed,...
view full answer... - Thule TracRac SR Ladder Rack Compatibility With Truxedo Tonneau CoversIt depends on which Truxedo tonneau cover you have for your Chevrolet Silverado. Some Truxedo tonneau covers will leave your stake pockets uncovered because the tonneau cover sits below the rails of your truck bed. If that is the case, you will still have a very tight fit between the tonneau cover and the ladder rack. We may have a Thule TracRac SR that is compatible with your 2021 Chevrolet Silverado. The ladder rack that is compatible with your vehicle depends on the length of your...
view full answer... - Adjustable Ladder Rack Compatible With BAK Revolver on 2020 Chevy Silverado 1500 w/ 6-1/2 BedThere is just one ladder rack for your 2020 Chevy Silverado 1500 with a 6-1/2' bed that is compatible with your BAK Revolver X2 Hard Tonneau Cover # BAK39131: - TruXedo Elevate Truck Bed Rack System # TX46NV The two are compatible because the Revolver is mounted inside your bed rails, and the Elevate mounts to the top of your bed rails. You can adjust the rack to sit either 18" or 28" high and it has a 500 lb capacity so you can very easily haul multiple kayaks with a carrier like # e98878...
view full answer... - BAK Revolver X2 Tonneau Cover Fit on 2013 or 2019 Chevy Silverado 1500 With 6-1/2 Foot BedThe BAK Revolver X2 tonneau cover you were looking at does not fit both a 2013 and 2019 Chevy Silverado 1500 with a 6-1/2 foot bed. The covers are different depending on the model year Silverado you have - 2013 Chevy Silverado 1500 With 6-1/2 Foot Bed: BAK Revolver X2 Tonneau Cover # BAK39101 - 2019 Chevy Silverado 1500 With a 6-1/2 Foot Bed: BAK Revolver X2 Tonneau Cover # BAK39131 I have added a link below to a video review for you to check out as well of this tonneau cover.
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Edited by:
Tyler C
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Video by:
Zach D
Written by:
Jason W
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob B.
11/21/2017
Still water resistant, works well, and looks great