To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to haul larger gear or materials, you don’t have to remove the cover. The soft, roll-up design lets you simply roll it toward the cab and secure it with the built-in strap and buckle system. It sits only 1/2" above the bed, so even when rolled up it stays out of the way and keeps your rear view clear. When you’re done hauling, just unroll it back into place for a tight, secure fit.
A cover that sticks up high can ruin the lines of your truck and add drag on the highway. The TonnoSport sits just 1/2" above the box, creating a sleek, flush look while reducing wind resistance. That low-profile shape helps improve gas mileage by up to 10 percent, all while keeping gear shielded from rain and road debris.
Changes in temperature can loosen some covers and cause sagging or flapping at speed. The EZ Dial system makes it easy to keep things tight—just twist the dials to adjust tension without any tools. The tension stays even across the bed so the vinyl stays smooth and quiet while driving through heat, cold, or rain.
Keeping your gear safe is simple with the automatic trigger latch that engages when you close the cover. Two side slide locks add extra protection. When combined with a locked tailgate, it seals off the bed so nothing can be lifted out or tampered with. Opening it is still easy—just pull the trigger latch for one-handed operation.
Installing this cover doesn’t require drilling or special tools. Six aircraft-grade aluminum clamps grab onto your bed rails using Tight Bite teeth for a solid grip that won’t shift. The rails are rustproof and precisely cut so they align cleanly with your bed caps and liners, giving you a sturdy, lasting mount that’s easy to remove if needed.
| Access TonnoSport | Other Access Covers |
|---|---|
| Straight, unpainted aluminum rails and support bows | Contoured, black powder coated aluminum rails |
| A single nylon securing strap | 2 Nylon securing straps |
| EZ Dial barrel-style tension adjustment | XT Dial easy-grip tension controls |
| Weather seal that runs along the truck bed sides | Full-length weather seal that runs along truck bed sides and continues along the cab side of the box |
| 2-Year limited warranty | 3- or 5-Year limited warranty |
| Affordable, entry-level alternative | Feature-rich covers with prices to match |
Alternate Instructions
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Don't be like me. Empty all the contents and that way you will find the extra instructions for the Santa Cruz. Cover is great and looks good too.
Very good product, on time delivery, easy installation.
Arrived on time. Had it installed today looks great. Very pleased with my cover. Thanks very much
Great communication from shipment, tracking, arrival and follow-up.
Product and price were decent. Instructions can be much much better or make a specific you tube video QR CODE VIDEO
Nice looking unit. Easy install but it flaps as you drives down the road. Cannot adjust to make it tighter.
It’s only been on one day, so difficult to say much yet. The installation instructions could be clearer!
Well made topper, instructions could use some work! A video would be nice! All in all a decent cover
Installation uses existing bolt holes so no drilling. Fairly easy to install. If you follow the directions. Pictures could be a little clearer in the instructions though.
I love it!
Thanks
Latch has an interference. Knew about the interference with the rollup and the in-bed hatch. Looks like they just shortened their standard product without regard to any special requirements of the Santa Cruz.
I received the window guards but the tonneau cover was not delivered. There is misrepresentation of your delivery. Sorry, don't mean to sound rude but I've been waiting long enough for the tonneau cover. I'll wait a few more days for delivery before I cancel order.
Thanks
Installation of this product is very difficult for Hyundai Santa Cruz (2025). The 2 sets of instructions are some of the worst I've ever seen plus you'll need to cross reference videos online for other models of trucks to fill out the missing information. I have it installed which look ok but it still needs more adjustment. Also when rolled up the Santa Cruz's back support frame next to the cab window area tapers up together at the top so the roll up doesn't fit up to the cab back window. I'll need to by clip extensions to hold it in it's rolled up position.
When installing the rails they would not sit square after tightening the clamps. The bed I have on my Santa Cruz has a plastic liner. Not sure if that was the problem. My son-in-law put two washers behind each clamp in order to square up the rail. That seemed to work. After the headache of trying to figure out how to correct the problem our solution worked. The cover itself looks great on the truck.
It wasn't hard to install. Directions could be better
Very well built just poor instructions on installation. Would buy again.
The directions could be better but the product is awesome
I like the cover. Instructions could be a bit clearer. Had to still look up a video for installation.
For the price and install time, I really like the cover.
After installation the fit was great.
The only thing is it wasn't very clear how to install the cab weather strip but I got it.
Excellent product instructions could be little better but after some reasoning was able to figure it out.
It fits and looks great. Shipping was extremely fast!! I didn't give it a five star rating because the cover mounting instructions were very difficult to follow and not specific to my compact pickup truck.
Excellent cover I love it! Engineering figured out an excellent solution to a tough situation with the Santa Cruz’s truck body constraints and it works as good as it gets. No drilling! Only 4 stars because I did have to debur a number of aluminum extrusion parts. But don’t get me wrong, This cover is exactly what I needed. Good job to the engineers who designed it. Note: I used a set of thick washers (1/8”) to shim up the rails slightly higher than flush of the bed rails so the tail gate could close.
Good value. After one year in the hot Georgia sun, an especially cold winter, and lots of recent rain; the cover continues to hold up well and looks as good as the day I installed it. The installation was fairly easy, but the instructions could use improvement. However, with a little patience the result is nearly a custom fit. I have no negative comments regarding the quality and effectiveness of the product. Easy to use and keeps cargo dry even in the hardest of rainfall.
Product is great the directions not so great. After the bulkhead rail and side rails are put in tonneau cover should be rolled from the back to the front so you know exactly where everything's going.
Kate F.
3/18/2026
I am glad the product is better than the instructions Robert! Unfortunately bad instructions are a part of the times, it is part of the reason why we started shooting the install videos back in the day. Glad you got things figured out, cover looks great!
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Anthony
10/10/2024
Very good no complaints great product