Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.
Features:
Specs:
This low-profile, aerodynamic Vortex Aero crossbar lets you replace a damaged bar, add a third bar to an existing rack, or build a stylish aftermarket roof rack from scratch. The crossbar requires a pair of Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. This bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in the crossbar's top channel disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. The crossbar also includes Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.
The rubberized Vortex strips in the top channel of this crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbar cuts through the air with minimal drag - even at highway speeds.
The Vortex Aero crossbar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding a significant amount of weight. And the aluminum bar won't rust so you can leave it on your roof year-round.
The crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.
The Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strip in the top channel comes in 3 pieces, so it's easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.
You can also attach most clamp-on accessories to the bar, and the Vortex strip provides a shock-absorbing, no-slip cushion for any accessories that rest on it.
The crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbar and help to secure channel-mounted accessories to the crossbar. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC2 - sold separately).
Average Customer Rating: 4.7 out of 5 stars (3415 Customer Reviews)
Aerodynamic, aluminum crossbar lets you build an aftermarket roof rack for your vehicle. Full-length bar provides plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Includes theft-deterring plastic locks.
The rubber molding easily compressed and served no purpose other than to fall into the channel and thus shred the aluminum gunnels on my expensive Kevlar canoe. I contacted Rhino rack and they were quick to dismiss my information with zero concern or questions. This is a product easily made better with modest changes to improve. Too bad customer service doesn’t exist…
Sturdy, easy to take on/off.
Exactly what I needed!
Good fit, easy install.
I have a 2012 Camry hybrid and haul a 180 L windsurfing board. My rack came as promised but lacked one of the bolts needed. I made one phone call and the missing bolt was on my porch in 2 days.
There's virtually no wind noise, surprising since the car is very very quiet at baseline and I expected there to be some.
My car lacks tie down or towing attachments so I got some of the loop type that clamp under the hood and trunk.
I'm very pleased with construction, fit, ease of use, and customer support. I'd buy it again.
Rhino rack does not stand behind their product. Beware had 3 broken and they won't replace the items. The end caps don't latch. Sent several pics per request for correction and the warranty dept just stopped responding.
Buyer beware, this is not a 1 off problem, the design is flawed. Cheap plastic is supposed to latch but just twist tight under the metal and after a half dozen or so adjustments the plastic is worn off.
Don't buy these.
Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
Durable looking product and has an easy install. On the roof of my van for the past year and still looking good. Holding out for 5 stars because I'm eating to see how it holds up in the desert sun after a few more years. Rhino-Rack is very hard to get information from regarding their products but etrailer had all the answers and gave me confidence with buying the product.
Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands.
My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!
Great fit, looks good even on my hail damaged Sierra, like the locking feature. Outer shipping box was trashed by carrier, but inner product boxes protected product. Like where it was made, quality strong product.
My Thule UpRide Roof bike rack mounted perfect in the T-Slots! Mounts easily and no issues in the Truxedo T-Slot rails on my Ford Ranger. Mounts perfect in Truxedo T-Slot rails.
Jeep wangler 2024 4xe with skyone touch top .Amazing the setup for my fishing kayak 12 feet. Everyone was looking at my setup on the road , and it was secure. Big thx to Kurt w & Paul B to recomand this kayak setup
10/10 www.Etrailer.
very solid rack, it's not going anywhere. Several fasteners to affix to truck cap. Clean look for the First Gen Tacoma (1999).
This is the second vehicle now that I've put the Rhino-Rack Aero Bar roof rack kit on. The instructions aren't too hard to follow with basic assembly knowledge and etrailer has a video tutorial for installation instruction which helped also. I didn't realize the allen wrench they provided also doubles as the security bolt bit you'll need when installing the brackets into the tracks so I just picked one up at the local hardware store. It's a great value for this product and I never had issues with my last kit and don't anticipate any with this one.
My roof rack arrived today and I installed the rails.
The product is sturdy, and attractive.
I am very pleased with the quality.
Installation Instructions are clear and precise.
The most important detail is to install the tracks parallel to each other and square to the roof
I recommend taking time to get this step correct.
I had another rack at one point but this rhino rack is far superior.
I would recommend it highly.
I feel like this could be a lot better. If the cross bars were about an inch longer it would fit perfectly but it’s kind of in the middle of I like it or I don’t. For the pice I feel like it should be better. Also it’s stretched so much the caps are almost impossible to put on.
Customer service is excellent. My rhino rack was delayed in the mail, Sheila assured me it was shipped on time. After two weeks I reported it as missing mail with the post office, and 5 days later it arrived. The box was pretty beat up, and two of my legs to attach the crossbar were missing. Called customer service and they were more than helpful to get me the parts I’m missing. I’m not certain, but the hole in the box was not big enough for the package with the legs in it to fall through. The rack itself is well made. It took me about 4 hours to install the tracks by myself. Had a missing bolt , had to find another and grind it down to the length I needed. The box had three sets of directions, so after going through them I figured it out. The nuts that fasten the rail to the truck were a little too short to accommodate the big plastic housing that holds the nut, because my truck cap has a section of it with a double roof. So I extracted the nuts out of them and found suitable large washers and used a socket to install. Waiting on the two legs to finish the job, then install the kayak holders onto my bars!
Will send pics when job completed!
The Rhino Rack looks great and very secure. I really like the option of the locking devise for security measure.
Tony G
Cedarburg WI
Do you have a question about this Roof Rack?
Condition: Installed
Notes: Item has been previously test fitted and has minor cosmetic scratches and the measuring strips have been cut.
Condition: Installed
Notes: Item has been previously test fitted and has minor cosmetic scratches and the measuring strips have been cut.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.