Euro Bar Adapter for Rhino-Rack ROC25 Series Roof Rack Legs - Qty 4

Video Transcript for The Low-Down on the Euro Bar Adapter for Rhino-Rack ROC25 Series Roof Rack Legs

Today we're gonna be taking a look at the Euro bar adapter kit for Rhino-Rack ROC25 series roof rack legs. And that's gonna let you use your Rhino-Rack Euro bars on 2500 series legs. It does include four adapters, as you can see here, with all the required hardware to get it mounted up, allowing you to adapt to you're crossbars. Let me show you kind of how this works. So this is your leg, your 2500 series leg. And on top here, we've got this plastic piece that just pops out, exposing these four little mounting holes, the rectangle ones there, and that center hole for the bolt.

So you're gonna take your plastic piece here, and you're just gonna pop that on and it has some tabs on the bottom that line up with those same holes, as we can see right there. Then you'll stick the included bolt, you can use the washers or you'll want to use the washers that come with the legs to begin with, with the new bolt. And that will basically pass up right there. And you'll use this piece to slide into the Euro bar. And as you tighten down the bolt, that will pull the crossbar down, with this metal piece inside of it, down snug, to the tower there.

So it's a pretty simple system, and I think it'll really help you out if you are looking to do that with your Rhino-Rack Euro bars, it's a really easy fix and gives you a little bit more versatility with it too. Well, that'll do it for a look at the Euro bar adapter kit for Rhino-Rack ROC 25 series roof rack legs. Thanks for watching..