Custom Fit Roof Rack Kit With Y00233 | Y00421 | Y53TR
Item # Y29GB
Our Price: $618.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (174)
- Q & A (0)
- Videos (64)
- Photos
Yakima Roof Rack - Y29GB
- Aero Bars
- Crossbars
- 50 Inch Bar Space
- Yakima
- Black
- 2 Bars
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima 50" CoreBar SM:- Aero-style, steel crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit
- Aerodynamic, teardrop shape helps to create a quiet roof rack system
- Controls air flow to significantly reduce wind noise and vibration
- Reduces drag to help maintain your fuel efficiency
- Full-length crossbars maximize space for clamp-on carriers and accessories
- Accommodate most universal-mount bike, water, snow, and cargo carriers
- Easy installation on Yakima towers with included brackets and hardware
- Works with BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Roll-formed, galvanized steel bars are extremely strong and durable
- Black vinyl coating protects the bars from corrosion
- Plastic endcaps help to keep water and debris out of bars
Yakima Landing Pad 11 (Set of 2):
- Provide mounting point for Yakima SkyLine and Control Towers
- Fit vehicles with fixed factory install points
- Attach to factory fixed points with anchor plates and screws
- Include snap-on covers for protection when Towers are not in place
Yakima SkyLine Towers (4-pack) (w/new covers):
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000233 Landing Pad 11 for Yakima Control Towers
8000421 Yakima Core Bar Cross Bars - Steel - Aero Profile - 50" Long - Qty 2
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Custom Fit Roof Rack Kit With Y00233 | Y00421 | Y53TR
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Crossbars SkyLine Towers Review
Hey everyone, it's Evangeline here at etrailer and today we'll be taking a look at our Yakima SkyLine towers. These are designed for your fixed mounting points, your flush rails, or your track systems. So if the roof of your vehicle looks like this, you probably need these. If you wanna carry around roof mounted accessories like kayaks or ladders or maybe you need to bring a Christmas tree home, you first need a roof rack system. Now this is gonna be the Yakima SkyLine towers for those vehicles that specifically require a custom fit kit for their fixed mounting points. Now if your vehicle does not look like this you might have a naked roof or raised rails.
That's why it's very important before anything to use our fit guide here at etrailer.com. Put your year, make model and then find the right fit for you. And if this is one of them let's take a look at how it works. Etrailer.com also helps you get the full kit for your vehicle because the skyline towers don't work alone you also need the appropriate crossbars as well as the correct fit kit or landing pads for you. But with this, you get a low profile roof rack so it doesn't stick too high up.
You get a heavy duty weight capacity since this is an aluminum roof rack. So usually they have 165 pounds capacity, depends on the vehicle, and you have this very sturdy but also very custom fit kit for your vehicle. That way, no matter what you put on it within reason and wherever you go, you know it's gonna stay there. But my favorite feature about this roof rack is the door design. So you pinch on the door to open it and that's it.
Just like that, you can lift the whole roof rack off of your roof. When you need to install it, you just pop it right back on. So the height of the tower is about 3 1/2" from your fixed mounting point to the top of the tower. The actual height can change depending on what crossbars you have and what rails you have, but compared to a lot of the other flush mounted crossbars and roof racks, it's just very low to the roof. Now with this style of a rack though, you are limited to the fixed mounting points or the flush rails of your vehicle.
So wherever they are, that's how much crossbar spread you get. For example, ours is set to 28" apart. On the other hand, if you have an aggressive tilt to your roof, you can actually adjust this up to six degrees forward or six degrees backward to help even out the playing field. Now I like to leave my roof rack on my vehicle and Yakima is pretty known for its durability. So the SkyLine towers are made of glass reinforced plastic, aluminum, stainless steel and elastomer. So all that is combined to help them stay strong even if you leave them on all day, all year. But if you do need to take off your roof rack you also have a feature to make it more low profile. Start by flipping both doors open and then you can lift the roof rack up and off of your roof. This way you can store it inside of your garage or in your house. You can leave your base on your roof rails. All you need to do is cover them with the included cover and that's it. You're done. The covered bases sit about 2" high up off of your fixed mounting point and makes for a much more low profile look. Your towers will have everything you need to install them which really is just one tool. And your fit kit has the hardware needed to undo the factory mounting points on your vehicle or for your track system if that's what you have. Now, that install process is extremely simple. Let's take a look at it. So these are what your towers look like when they are not on your roof. So they come all assembled in the box. All you need to do is get the appropriate landing pads for your vehicle. These landing pads can look different depending on your car and that's why it's very important to use our fit guide to get the right fit for you. You have four towers as well as the torque tool. And depending on your crossbars, you will also get a separate adapter to be used with those specific bars. With your landing pad kits, you'll get a part that fits your specific vehicle. You will get the hardware needed to install that part and you will have the base as well as the base cover. So if the towers are not on your vehicle you could just cover that base pad and take the cover off to install the tower. Here's an example of how the landing pad can be used depending on your cars. So you have a factory mounting point in this specific flush rail. So the pad goes over that hole and then you're gonna get your base which goes on top of that pad. And then you have a bolt with split washer and flat washer which is used to tighten down those two pieces to your car. The torque tool for your towers comes in handy whenever you're tightening down those bolts because it has a setting for tension. Once you get enough tension, it automatically clicks and prevents you from over tightening. Now to set up your tower for your crossbars there's different adaptor pieces. We're using the one for the JetStream crossbars. So we start by pushing in this plate into the tower. So you are gonna hear some clicks and that's how you know it's secure. Now we're gonna open up the tower door. So this involves pinching the door and pulling. Be careful because if you slide your fingers forward it doesn't feel as good. But with the door open, you can then loosen this bolt up front. It says to do it eight times. I just go until the bolt underneath is visible so you can see underneath what I mean. Notice how you have this little bolt head hiding around. You're gonna try to get at it with the tool. You can see how I do have access. That means as we flip this tower back over I can put this plate up top and then I can tighten down and thread onto that plate. With adapter and plate, this can now slide into your crossbar. For other adapters, they're designed to slide over or around your crossbar. With this specific style, I do recommend for the initial slide making sure that this is loose, but after that even if you have it fully tightened down you'll still be able to slowly adjust it on the crossbar. So with the towers on you're then ready to put this onto your roof. Now what I do is I just kind of roughly measure how far apart our landing pads are and that's when I can measure on the towers the distance apart they roughly need to be, in my case, 43 1/2. You could be off by 1/2" or so 'cause you can still move them. Also, supposedly this is when you put the rubber pieces inside of your crossbars. I do that after I've already installed them onto the roof. I take them back off and then I push them in so that I know exactly where the towers will be sitting. Make sure your towers are torqued down at their bottom bolt. Do that for both sides before installing. This is a lot easier with a friend on the other side but still doable with one person. So leave those doors open so that you can gently place them onto your roof. The bottom bracket with the door open fits onto your base so see how that just pushes into place. And then to secure it, just push that door close and you've got a sturdy fit. If you're using Yakima same key system lock cores, this is a time to switch them out on your towers. But other than that, just double check that all the towers are strong and secure and everything is sturdy. And that's it for the install of your roof rack. That right there was a look at the Yakima SkyLine towers for your Yakima crossbars for when you have vehicles that have fixed mounting points, flush rails or track systems.
Customer Reviews
Custom Fit Roof Rack Kit With Y00233 | Y00421 | Y53TR - Y29GB
Average Customer Rating: 4.8 out of 5 stars (174 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Cody05/25/2023
2017 Toyota Camry
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
by: Howard11/09/2023
2019 Hyundai Santa Fe
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
by: David 04/26/2024
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
by: Dan B.05/01/2016
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: Laura 04/01/2024
As described! Quick delivery!
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Matt 01/02/2024
Great product great service
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Lisa04/12/2019
Honda Ridgeline
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
by: Adam K05/14/2023
Should include extra end caps just in case they fall off.
by: Rafael07/03/2020
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
by: Dan 11/06/2023
Great company. Fast delivery.
by: Phil04/27/2018
2015 Toyota 4Runner
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
by: Steve30001/14/2023
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
by: Emma S.06/27/2020
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
by: Mike06/20/2018
2017 Ford Edge
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
by: Axl01/02/2017
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
by: Joe F.07/01/2019
Honda
Great product and Sales Support from etrailer.
I bought this for my Son as a Grad/BDay gift for a Honda HR-V which has slightly odd roof/door shape
He installed it himself said the install was straightforward but the instructions could use a little improvement.
etrailer Sales Support was great, I was a little concerned about getting the right parts and the return policy. Olivia was great to work with, she offered recommendations and matched the parts to the type and vehicle it was to be installed on along with a kayak mount.
All the parts arrived in mint condition with no missing pieces.
I'll for sure return to etrailer on future purchases.
by: Andy07/27/2020
Great product! Relatively easy install, had the racks on for a few days now with no issues.
by: Hung09/27/2021
2004 Toyota Camry
I have a 2004 Toyota Camry, my purpose is to purchase this Yakima Baseline System for Rooftop tent. My 23Zero rooftop tent weighs 130 lb, so far it's super solid. I did some minor adjustments based on the shape and level of the roof when mounting it.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Luke07/20/2012
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
25
519
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Can You Install Roof Rack System On 2013 Toyota Camry With SunroofYou can definetly install a roof rack system onto your 2013 Toyota Camry with a sunroof. I recommend the Yakima Roof Rack System which consists of four items. Yakima CoreBarCrossbars # Y00421, Yakima BaseLine Towers # Y28TR, Fit Kit # Y06119 and Fit Kit # Y06125. This system will allow you to carry multiple accessories like cargo carriers, kayak carriers, and bike racks on the roof of your vehicle and using the Yakima Same Key System Lock Cores # Y07204 will lock the roof rack to your...
view full answer... - Roof Rack Recommendation for 2018 Infiniti Q60 CoupeAlthough we don't have a traditional roof rack available for your vehicle, we do have an option that would work for you. In the case of your Q60, the primary fit issue for a traditional roof rack is the fact that the vehicle is a coupe with a very short roof line. Since the front and rear crossbars attach using the top of the vehicle's door jamb, on your particular vehicle the crossbars would be very close together, too close for roof rack mounted accessories to attach to the crossbars. The...
view full answer... - Roof Rack for 2023 Chevy Bolt EUV for 2 SurfboardsThe Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
view full answer... - Will the Rhino-Rack Batwing Compact Awning Work With Yakima CoreBar CrossbarsIn order to use the Rhino-Rack Batwing Compact Awning part # RR33400 you must switch from the Yakima CoreBar Crossbars part # Y00421 to the Yakima JetStream Crossbars part # Y00425. The Yakima JetStream Crossbars will work with your TimberLine Towers for Yakima Crossbars part # Y33TR so no worries here. The reason you must switch is that the Batwing mounts inside a crossbar channel which the CoreBar does not have but the JetStream does and will work with your setup so you are in luck. The...
view full answer... - Best Way To Carry a Bike by the Forks on a 2016 Mini CooperFor your two door 2016 Mini Cooper with flush mounted factory side rails, I recommend using the Yakima CoreBar Crossbar System which is composed of part # Y00421 for the bars, part # Y00145 for the feet, and part # Y06009 for the fit kit. This system features aero shaped crossbars which reduce wind drag and noise. The mounting feet and crossbars can be be secured to the roof using locks like part # Y07204. In order to carry your bike with the forks down, I recommend the Yakima ForkLift...
view full answer... - Roof Rack and Surfboard Carrier Recommendation for 2016 Jeep Grand CherokeeFirst you'll need a roof rack installed on your 2016 Jeep Grand Cherokee if your vehicle does not have one already from the factory. You need crossbars that run from left to right on the roof for a surf board rack to install. So you'll need to look at the rails on the roof of your vehicle that run front to back. If there is a chrome center section on the rail then you have the E Group style rails and you'd want the Yakima roof rack part numbers # Y00421, # Y53TR, and #Y00244 which is an...
view full answer... - Bike Rack Recommendation for a 2017 Honda CivicHello Tonya - Thanks so much for letting me know that your 2017 Honda Civic is a 4-door sedan. Once I know if you have a center exhaust on your vehicle, I can go ahead and recommend some great 2-bike racks for you!
view full answer... - Fitting a Thule Ski/Snow Board Carrier to Yakima CoreBar CrossbarsWithout knowing what Thule Ski/board rack you have, it is a little more difficult to ensure you have the proper clamps. If you have the Thule SnowPack Ski and Snowboard Carrier # TH7326 you were looking at, they would already be compatible with the Yakima CoreBar Crossbars like # Y00421. The Yakima CoreBar Crossbars # Y00421 are an aero-style crossbar, which the Thule SnowPack Ski and Snowboard Carrier # TH7326 is already designed for use with aero bars. If you have a different ski/board...
view full answer... - Solution for Transporting Bikes with 2018 Hyundai Ioniq ElectricSince you have the electric version of the 2018 Hyundai Ioniq the only solution we have for carrying bikes will be with a roof rack since none of our hitches are a fit and we also do not have any trunk racks. So for a roof rack we have the Yakima CoreBar Rack part numbers # Y00421, # Y28TR, # Y06175, and # Y06111 which is a confirmed fit and would work great. These bars are aero shaped so you'll have minimal wind noise and this rack is very easy to install as well. Then for bike racks...
view full answer... - Roof Rack Recommendation for 2019 Honda Accord with Naked RoofFor your 2019 Honda Accord the Yakima Corebar roof rack part numbers # Y00421, # Y28TR, # Y06123, and # Y06159 is the roof rack I recommend. This rack gives you a rack with aerodynamically shaped crossbars which means you'll have a quieter ride with minimal affected fuel mileage as well. This rack is also easy to install and has plenty of capacity at 220 lbs.
view full answer... - Recommended Aero-Style Roof Rack for 2014 Toyota Avalon HybridWe can offer you several options in an ultra-quiet aerodynamic type roof rack system for your 2014 Toyota Avalon Hybrid with a sun roof. You can choose from racks whose shorter bars terminate in the foot assemblies, for a cleaner more-OEM look, or you can select a rack with longer aero bars that extend through the feet to provide a larger surface for loading your cargo. Available bar lengths range from 42- to 54-inches. All options are shown on the linked page. The system I like for its...
view full answer... - Yakima Roof Rack for 2016 Ford Edge w/ Panoramic Vista RoofI checked with Yakima and the Baseline rack part numbers # Y00421, # Y28TR, # Y06102, and # Y06139 that you referenced is a confirmed fit for the 2016 Ford Edge with a Panoramic Vista Roof. I attached a couple pictures that I got from their fit guide that shows that the smaller feet fit perfectly on the top of the metal of the roof and that is how they are able to fit the rack.
view full answer...
- Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - Can Yakima Round Crossbars Install on Roof of 2015 Subaru Outback Wagon with Factory RackYakima does have a way to install a set of their round crossbars like the part # Y00408 on the roof of your 2015 Subaru Outback Wagon with the parts # Y53TR, # Y03536, and # Y00241 and you'd be set.
view full answer... - Can Front-To-Back Roof Rails Be Purchased For A 2023 Chevy Trailblazer LS The rails that run front -to-back on vehicle's like your 2023 Chevy Trailblazer LS would be an OEM part that you'd only be able to get from GM. Getting something like that installed aftermarket is typically a bit of a hassle or just unrealistically expensive. If you decide you'd rather go with a crossbar roof rack that's compatible with your naked roof then you'll need the following components: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 BaseLine Towers for Yakima...
view full answer... - Aero Roof Rack Recommendation for 2020 Honda CR-V with Naked RoofFor your 2020 Honda CRV with no existing rails, I recommend the Yakima CoreBar Crossbars. These are aerodynamic bars but unlike similar aluminum options, they're made out of heavy duty steel so you get the best of both worlds: a quieter ride with a strong, durable construction. Since you have a naked roof, you'll need a set of BaseLine Towers to attach the bars, along with BaseClips for the front and back which are custom made to perfectly fit the roof line of your 2020 CRV. The included...
view full answer... - Loadstop Compatibility With Yakima CoreBar And Universal Mighty MountsSince the Yakima CoreBar # Y00421 does not have a t-slot to accept the standard load stops like # 753-3761, and due to its shape the LoadStop Brackets for Yakima Round Crossbars # Y05000 won't work either, leaving you with no compatible option. In order to use the load stops # Y05000 with your MightyMounts # Y03590, you'd need a different set of crossbars # Y00408 with the adapter # Y03536. I know it's not ideal, but due to the uniqueness of your crossbars that is your best option.
view full answer... - Yakima Corebars Compatiblility With Yakima Snowboard/Ski RackThere is an option for a Yakima Ski and Snowboard Carriers that is compatible with Corebars without any adapter needed. The Yakima FatCat EVO 6 Locking Rooftop Ski and Snowboard Carrier - 6 Skis or 4 Boards # Y03096 is designed to fit all the various styles of crossbars including the Yakima CoreBar Crossbars like # Y00421 without adapters needed.
view full answer... - How Do You Raise And Lower A Kayak On To My 2018 Honda CR-V That Needs A Roof RackI do not have a solution that involves an electric winch. If you have a garage, I have an idea that might work for you. I recommend the Thule MultiLift Cargo Lift and Storage System - Ceiling Mount - 220 lbs, part # TH572. Since it has a weight limit of 220 lbs, you will not have a problem lifting your kayak. This system will allow you to raise and lower your kayak. If you have a setup that provides you with enough space to hang your kayak and still be able to park underneath it, this might...
view full answer... - Replacement Adapter and Seat for Yakima CoreBar CrossbarsIt sounds like you have the Yakima CoreBars like the # Y00421 with Skyline towers. We do have the replacement "strap" that allows you to attach the CoreBars to the Skyline towers. That is the Replacement Adapter and Seat for Yakima CoreBar Crossbars # 8880639.
view full answer... - Roof Rack Recommendation for a 2016 Ford Edge with Vista RoofI checked with Yakima and the Baseline rack part numbers # Y00421, # Y28TR, # Y06102, and # Y06139 that you referenced is a confirmed fit for the 2016 Ford Edge with a Panoramic Vista Roof. I attached a couple pictures that I got from their fit guide that shows that the smaller feet fit perfectly on the top of the metal of the roof and that is how they are able to fit the rack.
view full answer...
- Recommended Roof Rack for 2014 Mini Cooper S with Naked RoofI have a solution for you to add a roof rack to your 2014 Mini Cooper S, but the Yakima Roof Rack Kit that uses parts # Y00421, # Y00145 and Y06009 is not going to work with your bare roof. The only option available for your Mini Cooper is the SeaSucker Monkey Bars # 298-SX6000B, but this is a great option that allows you to easily install and remove your roof rack. The SeaSucker Monkey Bars have durable vacuum cup mounts that won't damage your vehicle, but are still extremely strong, and...
view full answer... - Recommended Roof Rack for 2015 Subaru Outback Compatible with Malone Kayak CarrierIf you have the flush mounted rails that run front to back on your 2015 Subaru Outback, then I recommend the following roof rack: Yakima CoreBar Crossbars - 50" Long # Y00421 SkyLine Towers # Y53TR Landing Pad 15 # Y00241 Lock Cores # Y07204 If you have the raised side rails, then I recommend the Rhino-Rack Vortex StealthBar Roof Rack # JA7975. Both of these options are rated for up to 165 lbs and will work well with the Malone SeaWing Kayak Carrier with Tie-Downs # MPG107MD. You...
view full answer... - Do Locks of Yakima Skyline Towers Lock Fit Kit to Vehicle As WellThe locks on the Skyline towers of the Yakima Jetstream roof rack that fits your 2022 Chevy Bolt EUV part numbers # Y00425, # Y53TR, and # Y00245 end up locking the bars to the feet, the feet to the landing pad and therefore the landing pad to the vehicle since you have to remove the feet before you can access the fit kit.
view full answer... - How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL DenaliFor a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much. Since your kayak is so long, using the Malone...
view full answer... - Roof Rack for 2017 Ford Explorer Compatible With Thule Hullavator ProThere is a roof rack for your 2017 Ford Explorer that is compatible with the Thule Hullavator Pro Kayak Carrier and Lift Assist # TH898, although the 53 inch bars of the Rhino-Rack system are not going to be quite long enough to work. Due to that, in order to get long enough bars you will need to go with the Yakima roof rack. The reason is due to how crossbars mount; they foot pack that attaches to the bars slides into a channel underneath the crossbars. That channel on the Rhino-Rack...
view full answer...
- Roof Rack Needed for 2007 GMC Yukon Denali with Flush Rails and No Track on TopFrom what I could find it looks like you can use the Yakima Landing Pad 20 # Y00246 as a base for the roof rack system. I recommend checking out the linked instructions just to be on the safe side. After the Landing Pad 20 you'll need the SkyLine Towers # Y53TR and then I recommend going with the 60" JetStream Crossbars # Y00426 because they are the nicest that Yakima has to offer and they are the most versatile when it comes to mounting accessories to them.
view full answer... - Recommended Yakima Roof Rack to Fit 2016 GMC YukonThe best Yakima Roof Rack for your 2016 GMC Yukon consists of: 60 inch JetStream Crossbars # Y00426 (black) SkyLine Towers # Y53TR Landing Pad # Y00243 This is Yakima's quietest, most aerodynamic roof rack. It uses built-in WindRidges to contorl air flow over the bars to reduce wind noise and vibration. The bars are strong, durable, and will support up to 165 pounds. I've attached a video review for you to take a look at.
view full answer... - Which Rhino-Rack Pioneer Platform for 2018 Subaru Outback WagonThe Rhino Rack 58" x 47 " Pioneer Platform # RR42115BF is a confirmed fit per Rhino Rack for your 2018 Subaru Outback Wagon but I think you would have issues mounting this. We have not had the opportunity to test this out ourselves to confirm. With this being wider than the cross bars the outside mounting location is too wide for your crossbars. The center of the outside mounting location is 3-5/8" from the outside of the platform. You would not clear the side rails that your crossbars...
view full answer... - Roof Rack for 2023 Chevy Bolt EUV for 2 SurfboardsThe Yakima Corebar roof rack part numbers # Y00421, # Y53TR, # Y00245 would be a great roof rack for your 2023 Chevy Bolt EUV to carry two surf boards with a carrier like the Inno Board Locker Surfboard Carrier part # INA744 which can carry up to two boards.
view full answer... - Roof Rack for Leer Cap With Factory Tracks on 2015 Ram 1500You can absolutely get a roof rack for the factory tracks of the Leer cap on your 2015 Ram 1500. I have spoken about this exact issue with Yakima and they have told me the exact parts you need for a roof rack on your truck cap, which is the following: - Landing Pad 1 for Yakima Control Towers # Y00221 (Quantity of 2) - SkyLine Towers for Yakima Crossbars # Y53TR Crossbars (the correct length will depend on how wide the tracks are on your Leer cap, so just be sure to measure and then choose...
view full answer... - Low Profile Roof Rack and Cargo Box to Carry Skis on a 2018 Subaru Outback WagonI went out to our warehouse to measure a lot of the kits available to you. Since the sizing is standardized and your 2018 Subaru Outback Wagon has fixed mounting points, you can predict the size of the rack overall pretty easily. The lowest profile kit is the Yakima JetStream, standing at 4-1/2 inches tall. You will need the same mounting kit regardless of what length bar, which consists of: - Yakima SkyLine Towers, part # Y53TR - Yakima LandingPad 15, part # Y00241 What's nice is...
view full answer... - Recommended Platform Rack for 2019 Mercedes-Benz Metris Van With Naked RoofWe do have a way to add a large platform rack to your 2019 Mercedes-Benz Metris. What you will need to do is add a roof rack from Yakima, which you can then attach a Yakima Platform tray to. Here are all the parts you need, starting with the roof rack, and then the tray. Roof Rack - Yakima JetStream Crossbars # Y00426 (Black) - SkyLine Towers for Yakima Crossbars # Y53TR - Landing Pad 22 for Yakima SkyLine and Control Towers # Y00248 - Yakima Same Key System (SKS) Lock Cores # Y07204 Platform...
view full answer... - Can 60 Thule AeroBlade Bars be Used on a 2015 Jeep Grand Cherokee with the E Group PackageTo determine if you can use the 60" WingBar Evo Crossbars, part # TH711500 or part # TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet will sit. I have attached a picture showing where you want to measure. If this measurement falls between 46-1/2" - 59-3/4" then the 60" bars will fit. For your E Group package you also need the Podium Foot Pack # TH460R and the Fit Kit # THKIT3142 to...
view full answer...
- Can Thule Tandem Bike Rack be Used on Roof of 2020 Subaru Outback Wagon with OEM CrossbarsThe Thule Tandem Bike Rack part # TH558P requires an aftermarket roof rack so for your 2020 Subaru Outback Wagon with the current factory rack you'd also need the Yakima # Y00408, # Y53TR, # Y03536, # Y46VR to use the carrier.
view full answer... - Which Yakima Landing Pads for 2021 Toyota Highlander to Mount Skyline TowersTo use the Yakima Skyline Towers # Y53TR on your 2021 Toyota Highlander the correct landing pads are the Landing Pad 28 for Skyline and Control Towers # Y66VR.
view full answer... - Troubleshooting Yakima Roof Rack Installation on a 2021 Toyota HighlanderIf you are having issues getting the Landing Pad 28 # Y66VR and SkyLine Towers # Y53TR to fit correctly on your 2021 Toyota Highlander then the first thing to check is that you have the pads in the correct positions. You should have them turned in such a way that the extra material is facing to the front of the Highlander for the front pads and then the back of the Highlander for the rear pads (see attached). If you have done this correctly then try sending me some photos and I'll see...
view full answer...
- Roof Rack and Surfboard Carrier Recommendation for 2016 Jeep Grand CherokeeFirst you'll need a roof rack installed on your 2016 Jeep Grand Cherokee if your vehicle does not have one already from the factory. You need crossbars that run from left to right on the roof for a surf board rack to install. So you'll need to look at the rails on the roof of your vehicle that run front to back. If there is a chrome center section on the rail then you have the E Group style rails and you'd want the Yakima roof rack part numbers # Y00421, # Y53TR, and #Y00244 which is an...
view full answer... - Roof Rack Recommendation for 2009 Hummer H2For a 2009 Hummer H2 we have the Yakima Roof Rack part numbers # Y00409, # Y53TR, # Y03536, and # Y00224 which is a confirmed fit and will work well. We don't have anything for a 2011 model as there wasn't a 2011 model made in the US nor do we have anything that was made by Hummer.
view full answer... - 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Does Yakima Roof Rack for 2017 Honda CR-V Have Speed RatingThe roof racks we offer for your 2017 Honda CR-V like the Yakima part numbers # Y00425, # Y53TR, and # Y00245 which give you an aero shaped bar do not have a max speed rating but as long as you are below or near the speed limit you are going to be fine. I'd imagine you'd have bigger issues at whatever speed is too much for this roof rack long before the rack itself would become an issue. I looked pictures of tarheel antennas and they are pretty big. I am not sure that a roof rack would...
view full answer... - Roof Rack and Rear Loading Kayak Carrier Recommendation for a 2021 Honda CR-VFor your application I recommend going with a Yakima setup, both for the roof rack and for the kayak carrier. To install a Yakima roof rack on your 2021 Honda CR-V you need the following: 50" JetStream Crossbars - Black # Y00425 SkyLine Towers - # Y53TR Landing Pad 19 - # Y00245 Lock Core Kit - # Y07204 (optional) The Rhino-Rack Nautic 581 Rear Loading Kayak Carrier # RR581 will fit the channels of the Yakima system just fine and it's a good rear-loading kayak carrier, I just really like...
view full answer... - Will I Be Able to Use the Thule Hullavator in the Channels of Rhino-Rack Vortex Aero Crossbars?To address your question - yes. The top channels in the Vortex Aero Crossbars in the # Y02-490B are the same dimensions as the Thule channels like in the Thule WingBar Evo Crossbars # TH711420. However, when it comes to finding the fit required for the Thule Hullavator # TH898 on a camper shell, it is a bit complicated. The reason why is because in order for the Hullavator to function in the "down" position, it requires at least 4 inches of crossbar clearance past the feet. In addition...
view full answer... - Yakima Round Bar Roof Rack for 2015 Jeep Grand Cherokee with E Group PackageIn order to install round Yakima crossbars like the 48" # Y00408 on your 2015 Jeep Grand Cherokee with the E Group Package you will need the SkyLine Towers # Y53TR, the RoundBar SL Adapter # Y03536, and the Landing Pad 18 # Y00244 (which is what will actually mount to the fixed point on those factory rails. This will provide you with a complete round bar roof rack system for your Jeep. I have attached an installation video that you can use for reference.
view full answer... - Yakima Round Bar Roof Rack that Fits 2017 Subaru OutbackYes, Yakima does offer a round bar roof rack that is a confirmed fit for your 2017 Subaru Outback Wagon with the factory roof rails. For that you'd need the part numbers # Y00408, # Y53TR, # Y03536, and # Y00241, but since you have bars already you'd be able to do without the part # Y00408.
view full answer... - Roof Rack Needed for 2021 Jeep Grand Cherokee Limited For Thule HullavatorFor your 2021 Jeep Grand Cherokee that has the flush roof rails that have the chrome center section for a roof rack the Yakima 55 inch HD bar setup part # Y01156, # Y53TR, # Y03541, and # Y00244 would be a really great option with plenty of capacity and bar space for roof top cargo. Now you'd only be able to fit two of the Hullavators part # TH898 based on how much space they take up and how they fold down etc. This rack can easily detach for the Yakima bars as it would fit into the top...
view full answer... - Roof Rack for 2019 Cadillac XT5 PlatinumIn regards to vehicles that have a trailer hitch - which would be put on at the factory - some of them can be removed, but some are welded on, and there is unfortunately no way for us to know which vehicles have welded hitches. Additionally, there is not a fit for a trailer hitch fit for a 2019 Cadillac XT5 Platinum which would allow you to replace it. The roof rack is another story and that can be removed on a '19 XT5 Platinum. The roof rack on this vehicle (which I checked out and you...
view full answer...
- 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - 2016 Mazda CX5 Yakima Roof Rack RecommendationFor your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y53TR RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
view full answer... - How To Choose Between A Roof Rack And Ladder Rack On A 2016 Ram ProMaster CityI do have an option that will allow you to carry both elongated items and rooftop mounted accessories on your 2016 Ram ProMaster City, however, the TracRac TracVan ES Van Ladder Rack part # TH29616XT has crossbars thats are much too big for most roof rack accessories. Therefore, I recommend using the Yakima CoreBar Crossbar System part # Y00421, part # Y00148, and part # Y00233 as this roof rack system has a weight capacity of 165 lbs. In addition to weight capacity, the aero crossbars...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation to Fit Factory Fixed Mounting Points of 2016 Mazda 3 SedanFor your 2016 Mazda 3 Sedan with factory fixed mounting points we have a fit but it is not the Rola you referenced. Instead you would need the Yakima kit part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which is a confirmed fit.
view full answer... - Will Rhino-Rack Roof Mounted Steel Cargo Basket Fit 2016 Subaru ForesterRoof mounted cargo baskets like the Rhino-Rack # RMCB02 referenced in your question are universal-fit products that are designed to fit most vehicles. There is not a specific vehicle fit-guide as it related to cargo baskets. When looking at possible compatibility issues with a cargo basket and other roof-mounted accessories, you will want to look at the particular roof rack that is installed on the vehicle. The Rhino-Rack Cargo Basket will work on round, square, aero, elliptical and most...
view full answer... - Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2017 Ram ProMaster City to Use Rhino Rack Batwing AwningLike you mentioned the Rhino Rack Batwing Awning part # RR33200 that you referenced does require a roof rack with top channels so for your 2017 Ram ProMaster City with a naked roof you would need a rack like the Yakima HD Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which does have a track on top of the crossbars.
view full answer... - Recommended Upgraded Crossbar System for a 2017 Mitsubishi Outlander With a Bare RoofI spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof. With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233. This system will work with your bare roof, has a maximum...
view full answer... - Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with SunroofI have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer...
- 2008 Mercedez C300 Sedan Yakima Round Bar Roof Rack RecommendationFor your 2008 Mercedes C300 the Yakima Skyline roof rack components you need are # Y00408, # Y53TR, # Y03536, and # Y00233 which includes the Landing Pad 11.
view full answer... - Roof Rack for 2017 Subaru Impreza Sedan with Naked RoofYakima does have their Jetstream roof rack that fits your 2017 Subaru Impreza with a naked roof with the part numbers # Y00425, # Y53TR, and # Y00233 which is a super high quality roof rack that's easy to install and quiet but we also have other options like the Inno part # INXB123-130, # INXS350, and # INTR145. We have a few others two that you can check out at the link I attached to this page.
view full answer... - Cargo Box Recommendation for a 2014 Subaru Forester with Fixed PointsFor a Yakima roof rack confirmed to fit the fixed points of your 2014 Subaru Forester you would need the SkyLine Towers and RoundBar SL Adapter parts # Y53TR and # Y03536, 2 sets of the LandingPad 11 # Y00233, and a set of 2 48 inch crossbars # Y00408. The Yakima MegaWarrior # Y07080 has been confirmed to fit this rack as well. I checked with Yakima and all of their cargo boxes we carry are confirmed to fit this rack. I attached a link to al of them to the right.
view full answer... - 2016 Mazda CX5 Yakima Roof Rack RecommendationFor your 2016 Mazda CX-5 with a naked roof you would need the following Yakima components to complete a roof rack: Round 48" CrossBars # Y00408 (you most likely already have these) SkyLine Towers # Y53TR RoundBar SL Adapter # Y03536 LandingPad 11 for Yakima Control Towers # Y00233
view full answer... - How To Choose Between A Roof Rack And Ladder Rack On A 2016 Ram ProMaster CityI do have an option that will allow you to carry both elongated items and rooftop mounted accessories on your 2016 Ram ProMaster City, however, the TracRac TracVan ES Van Ladder Rack part # TH29616XT has crossbars thats are much too big for most roof rack accessories. Therefore, I recommend using the Yakima CoreBar Crossbar System part # Y00421, part # Y00148, and part # Y00233 as this roof rack system has a weight capacity of 165 lbs. In addition to weight capacity, the aero crossbars...
view full answer... - Roof Rack Recommendation for 2011 Ford Flex to Carry Yakima ShowDown Assisted Kayak CarrierFor your 2011 Ford Flex with a naked roof Yakima does offer a roof rack solution that fits your vehicle that will allow you to use the Yakima Showdown part # Y04081 that you referenced. For that you'd need the part numbers # Y00422, # Y53TR, and # Y00233 and you'd be set. This is a custom fit rack that gives you aero shaped bars that will work great with the Showdown.
view full answer... - Roof Rack Landing Pads Recommendation for a 2011 Mazda 2The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233. If you want the rest of the rack components you would also need the following: Round 48 Inch Cross Bars Pair # Y00408 Yakima SkyLine Towers Roof Rack Feet # Y53TR RoundBar SL Adapter, part # Y03536
view full answer... - Recommended Roof Rack and Ski/Snowboard Carrier for 2015 Mazda CX-5 with Naked RoofI highly recommend using the Yakima JetStream roof rack for your 2015 Mazda CX-5 because it has a 165 lb weight capacity, mounts directly to fixed points on your roof, and allows you to use a variety of other roof mount accessories. This consists of the SkyLine Towers # Y53TR, Landing Pad 11 # Y00233, and then your choice of JetStream Bars: 50" Black # Y00425 60" Black # Y00426 70" Black # Y00427 You can then use the Yakima FreshTrack # Y03093 and the Lock Core Set # Y07206 to make...
view full answer... - Roof Rack Recommendation for 2016 Mazda CX-5 for Carrying Yakima Skybox 16For your 2016 Mazda CX-5 the Yakima Jetstream roof rack part numbers # Y00425, # Y53TR, and # Y00233 would be an excellent option for your vehicle to carry a Yakima Skybox NX 16 part # Y95AV. This is the quietest and highest quality racks that fit your vehicle.
view full answer... - Recommendation for Carrying 4 Bikes on BMW 535iThe 2015 BMW 5 Series will use a Class I trailer hitch like the Curt trailer hitch # C11381. Due to their limited tongue weight capacity Class 1 trailer hitches are limited to carrying 2 bikes so you won't be able to carry four bikes with the Swagman Titan Bike Rack # S63410. The limited tongue weight capacity (maximum amount of downward force that can be safely applied to the hitch) is one reason, but additional bikes after the first two move the load further rearward away from the receiver...
view full answer... - Roof Rack Recommendation to Fit Factory Fixed Mounting Points of 2016 Mazda 3 SedanFor your 2016 Mazda 3 Sedan with factory fixed mounting points we have a fit but it is not the Rola you referenced. Instead you would need the Yakima kit part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which is a confirmed fit.
view full answer... - Will Rhino-Rack Roof Mounted Steel Cargo Basket Fit 2016 Subaru ForesterRoof mounted cargo baskets like the Rhino-Rack # RMCB02 referenced in your question are universal-fit products that are designed to fit most vehicles. There is not a specific vehicle fit-guide as it related to cargo baskets. When looking at possible compatibility issues with a cargo basket and other roof-mounted accessories, you will want to look at the particular roof rack that is installed on the vehicle. The Rhino-Rack Cargo Basket will work on round, square, aero, elliptical and most...
view full answer... - Which Roof Rack and Multi-Kayak Carrier can be Used With a 2012 Mazda 3 Hatchback?We can get you set up to transport a pair of 10-foot kayaks on your 2012 Mazda 3 hatchback. For a roof rack, I recommend going with the Yakima; it has aero crossbars, # Y00425, which are used in conjunction with the Landing Pad # Y00233 and Skyline Towers # Y53TR that install onto fixed mounting points on your Mazda's roof. To transport your 10-foot kayaks on the Rhino Rack, you can use the Thule The Stacker # TH830. It mounts directly onto the crossbars and utilizes a combination of...
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Bike Carrying Recommendations for 2012 Mazda 3 HatchbackThe Yakima Roof Rack which uses the LandingPad 11 (consisting of parts # Y00408, # Y00124 and # Y00233) is designed so that the crossbar and feet are quickly and easily removable, but the LandingPad would remain on the roof. The remainder of the offerings would connect directly to the fixed mounting points on the vehicle roof. It's possible to remove this type of rack when it's not being used, but it's a bit of an undertaking. Given your concern regarding leaving the LandingPad in place,...
view full answer... - Roof Rack Recommendation for 2017 Ram ProMaster City to Use Rhino Rack Batwing AwningLike you mentioned the Rhino Rack Batwing Awning part # RR33200 that you referenced does require a roof rack with top channels so for your 2017 Ram ProMaster City with a naked roof you would need a rack like the Yakima HD Roof Rack # Y01156, # Y53TR, # Y03541, and # Y00233 which does have a track on top of the crossbars.
view full answer... - Recommended Upgraded Crossbar System for a 2017 Mitsubishi Outlander With a Bare RoofI spoke with Thule and they were able to confirm that there actually are not any corresponding fit kits for the Traverse Feet and your 2017 Mistubishi Outlander with a slick roof. With that being said, your only option is to upgrade your roof rack to a newer system like the Yakima CoreBar Crossbars # Y00421, with the SkyLine Towers for Yakima Crossbars # Y53TR and the Landing Pad 11 for Yakima SkyLine and Control Towers # Y00233. This system will work with your bare roof, has a maximum...
view full answer... - Recommended Roof Rack For a 2013 Ford Transit ConnectI recommend the Yakima HD roof rack for your 2013 Ford Transit Connect. This will consist of the Crossbars # Y01156, Towers # Y53TR, Adapters # Y03541 and Fit Kit # Y00233. I prefer this option as the bars have a versatile design to accept either track or clamp on accessories plus the endcap has an integrated tie-down point to help secure your cargo.
view full answer... - Parts Needed to Adapt Yakima Roof Rack for a Ford Taurus X to a 2012 Ford FlexTo install a roof rack system on your 2012 Ford Flex, you will need a set of SkyLine Towers, # Y53TR, a set of RoudBar Adapters, # Y03536, and the landing pads, # Y00233. Along with a set of Yakima CrossBars. Yakima recommends 58 inch CrossBars, # Y00409. If your previous Taurus X used 58 inch CrossBars, my research shows it most likely does, then you would not need to purchase new CrossBars.
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Yakima Baseline or Skyline Roof Rack Recommendation for 2016 Mazda CX-5 for Fixed Point RoofThe difference between the Yakima Baseline towers and Skyline towers is the style of roof they are intended which in your case indicates how it would install. The Baseline kits are designed for naked roof and will use the door clamps. The Skyline kits are designed for use on vehicles with factory fixed mounting points. Since this is the route you mentioned preferring on your 2016 Mazda CX-5 it would be your best option. That means you'll want the Yakima Skyline Aero Bar kit part numbers...
view full answer... - Roof Rack Similar to Whispbar Recommendation for 2014 Tesla Model S with SunroofI have a solution that will work well for you but Whispbar was actually bought out by Yakima. So to get the most similar roof rack to a Whispbar for your 2014 Tesla Model S with a sunroof, you'd want the Yakima JetStream roof rack part numbers # Y00426, # Y53TR, and # Y00233. With this you'd have a very high quality roof rack like you are wanting, that has aero shaped bars which will allow you to have minimal wind noise.
view full answer... - Roof Rack Recommendation for 2016 Subaru WRX STiWe do offer some roof rack fits for your 2016 Subaru WRX, but the SportRack # SR1003 you had looked at wouldn't be a fit for your vehicle. The specific rack needed will depend on if your WRX is the sedan or hatchback model. For a sedan model, our most cost-effective alternative would be a square bar roof rack from Rhino-Rack, which would consist of the following parts: Euro style crossbars, part # RREB118B Roof rack feet, part # RRRLKVA Euro bar adapter, part # RREB-FK1 Vehicle specific...
view full answer... - Yakima Roof Rack Components Needed For A 2015 Kia SoulIdk exactly how you got to that specific page but it's only including the Yakima JetStream crossbars # Y00425 and Landing Pads for Yakima SkyLine and Control Towers # Y00233 and does not include the towers needed. For a 2015 Kia Soul with a naked roof you would need the following components: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 # Y00425 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4 # Y53TR Landing Pad 22...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.