See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack for a 2024 Chevrolet Trailblazer w/ Flush Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevy Trailblazer with flush roof rails you will need the following parts: Yakima SkyLine FX Roof Rack - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. The crossbars do not extend past the mounting legs. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk of...
  view full answer...
• Recommended Crossbars for a 2024 Chevrolet Trailblazer With OEM Rails
  Yes it does make a bit of a difference but in either case we have you covered. I recommend checking out the Yakima SkyLine FX Roof Rack for Fixed Mounting Points # Y66UV with the Landing Pad 19 for Yakima SkyLine and Control Towers # Y00245. These crossbars install easily by clamping onto your existing roof rails, measure 37-1/2" long x 5" wide x 3-1/2" tall, and has a dynamic weight capacity of 165 lbs.
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Trailblazer w/ Flush Rails
  To add a set of crossbars, that don't extend past the legs, to your 2024 Chevy Trailerblazer, I recommend the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great...
  view full answer...
• Recommended Crossbars for a 2024 Chevy Trailblazer w/ Flush Roof Rails
  To add a set of crossbars to the flush rails on your 2024 Chevy Trailblazer, I recommend the roof rack by Yakima which includes the following parts: SkyLine FX Roof Rack for Fixed Mounting Points - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 This roof rack has a 165 lbs capacity and attaches directly to your Trailblazer's rails without drilling.
  view full answer...
• Roof Rack Confirmed to Fit a 2024 Chevrolet Trailblazer with Flush Rails That Run Front to Back
  Yes, I can recommend a roof rack for your 2024 Chevrolet Trailblazer with flush rails that run front to back. The 2024 Chevrolet Trailblazer Roof Rack by Yakima is going to be a great choice and consists of: - Yakima SkyLine FX Roof Rack with JetStream Aero Crossbars # Y66UV - Landing Pad 19 for Yakima # Y00245 This will provide you with the parts needed to add crossbars to your Trailblazer. These crossbars will allow you to carry both channel mount and clamp-on accessories.
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Traverse w/ Flush Mounted Rails
  Yes, we do. To add a set of crossbars to your 2024 Chevy Traverse's flush mounted rails, you will want the roof rack by Yakima which includes the following parts: Yakima SkyLine FX Roof Rack for Fixed Mounting Points - JetStream Aero Crossbars - Black - Qty 2 item # Y66UV Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
  view full answer...
• How to Carry a 98-LB Kayak on a 2012 GMC Yukon XL Denali
  For a 2012 GMC Yukon XL Denali, Yakima makes a great roof rack system. I recommend the HD bars, part # Y01156. They are heavy-duty bars capable of handling your kayak. To mount them to your tracks, you will need the SkyLine Towers, part # Y53TR, along with the HD Bar SL Adapter, part # Y03541, and the Landing Pad 20, part # Y00246. The total system can handle 165 pounds, but check your owner's manual to ensure your roof can handle that much. Since your kayak is so long, using the Malone...
  view full answer...
• Roof Rack Needed for 2007 GMC Yukon Denali with Flush Rails and No Track on Top
  From what I could find it looks like you can use the Yakima Landing Pad 20 # Y00246 as a base for the roof rack system. I recommend checking out the linked instructions just to be on the safe side. After the Landing Pad 20 you'll need the SkyLine Towers # Y53TR and then I recommend going with the 60" JetStream Crossbars # Y00426 because they are the nicest that Yakima has to offer and they are the most versatile when it comes to mounting accessories to them.
  view full answer...
• Load Assist Kayak Carrier for 2012 Hyundai Sante Fe With Factory Roof Rack
  I have a couple solutions for you but the Thule Hullavator # TH898 will not work with your factory roof rack on your 2012 Hyundai Sante Fe. The carrier requires 4"-8" of crossbar overhang from the support tower. This is to provide enough clearance for the lift assist to clear the side of your 2012 Hyundai Sante Fe. You can swap out your factory roof rack for a roof rack system that has an overhang that will work with the carrier. The Yakima Jetstream Roof Rack could get you the overhang...
  view full answer...
• Roof Rack for 2012 GMC Yukon Denali with Flush Rails to Hold Two Thule Hullavators
  For the flush rails of your 2012 GMC Yukon Denali Yakima has their Jetstream roof rack part numbers # Y00426, # Y53TR, and # Y00246 and you'd have a set of 60 inch bars you could attach two of the Thule Hullavators # TH898 to. This rack fits into the channels of the flush rails of your roof.
  view full answer...
• What Landing Pads Fit My 2016 Jeep Compass with Flush Factory Rails?
  I have a Landing Pad solution for you. Unfortunately, when the Landing Pad 20 # Y00246 says "Not confirmed to fit" your 2016 Jeep compass, that means that we have tested it with all the available configurations and it will not fit. However, the correct landing pads you need for a Yakima crossbar system on your 2016 Jeep Compass with flush factory rails is the Landing Pad 19 for Yakima Skyline Towers # Y00245. Although these landing pads will fit your vehicle, the towers that go along...
  view full answer...
• Roof Rack Kit for a 2008 GMC Yukon XL Denali
  There is a fit available for the 2008 GMC Yukon XL Denali, consisting of the following base kit: Yakima JetStream Towers, 50 Inches, part # Y00425 Yakima SkyLine Towers, part # Y53TR Yakima Landing Pad 20, part # Y00246 You also have the option switching the JetStream Towers for either the 50 inch CoreBar, part # Y00421 which removes the c-channel from the JetStream or 58 inch round bars, part # Y00409 with SL Adapter, part # Y03536.
  view full answer...
• Roof Rack Recommendation for 2012 Hyundai Santa Fe with Flush Rails
  Sounds like you need the Yakima roof rack consisting of: Yakima JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 SkyLine Towers # Y53TR Landing Pad 20 # Y00246 I did some checking with them and they fit this rack to a Santa Fe like yours that has the flush mounted railings you described. The landing pads are made specifically for the fixed mounting points in your factory flush rails.
  view full answer...
  
• Roof Rack That Fits 2012 GMC Yukon Denali with Flush Roof Rails
  Okay so Yakima does offer a roof rack that fits the unique Denali flush rails of your 2012 GMC Yukon with the part numbers # Y00426, # Y53TR, and # Y00246 for their JetStream bar setup. Thule at this time does not have a fit for the Denali versions of your vehicle. The fit kit of this rack does use a channel nut that slips into the channels you mentioned having on the flush bars.
  view full answer...
• Yakima Roof Rack that Fits 2010 GMC Yukon XL
  The Yakima and Rhino Rack roof rack components are not interchangeable so for your 2010 GMC Yukon XL Denali you'd have to stick with the Yakima roof rack that consists of part # Y00246, # Y00152 (quantity of 2), and # Y00425.
  view full answer...

Do you have a question about this Roof Rack?