See what our Experts say about this Yakima Roof Rack

• Recommended Roof Rack for a 2024 Toyota Camry w/ No Rails
  I would be happy to! To add a roof rack to your 2024 Toyota Camry with no rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06163 This flush mounted roof rack does not extend over the sides of your Camry's roof. It has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Will The Thule ProRide XT Roof Bike Rack Fit With Factory Honda Crossbars On A 2018 CR-V
  If you're talking about actual crossbars (running from side-to-side) and not factory rails (running from front-to-back) then yes the Thule ProRide XT # TH598004 will be a compatible fit. The factory honda crossbars are exactly like the Yakima Jetstream aero bars # Y56UV, as a compatible comparison. The clamps will allow you to easily install your rack in seconds, if you want a quick walk-through of this then check out the attached video below.
  view full answer...
• Recommended Roof Rack for a 2024 Ford Escape w/ No Roof Rails
  Congrats on the new SUV. It won't be a problem at all to add a roof rack to your 2024 Ford Escape that looks close to factory. To do so I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06152
  view full answer...
• Will Crossbars Interfere With The Panoramic Sunroof Of A 2023 Ford F-150
  Yes, any roof rack, including the Yakima BaseLine FX Roof Rack for Naked Roofs # Y56UV, would most likely prevent you from being able to open your panoramic sunroof. Even if the crossbars clear the glass there's always the chance that whatever weight you out on top of them could cause them to dip down enough and touch so roof rack manufacturers don't ever approve of opening the sunroof while the crossbars are installed. If you'd still like to use these crossbars then you'll also need...
  view full answer...
• Roof Rack Recommendation for 2021 Toyota Highlander with Naked Roof
  Hey Ronnie, I attached a link to this page that shows all of the roof racks that are a fit for your 2021 Toyota Highlander with a naked roof but my favorite option is the Yakima Jetstream part # Y00429, # Y28TR, # Y06153, # Y06132 as we had chance to install all of the racks we carry and we all agreed the Yakima racks are the nicest and the easiest to use. This is a through bar design which means the bars are longer than the feet of the rack which is great for if you need max bar space. If...
  view full answer...
• 2020 Honda CR-V OEM-Style Roof Rack Recommendation
  Thanks for reaching out, Erin! It sounds like you're wanting more of an OEM-style roof rack for your 2020 Honda CR-V, which we definitely have. Out of the options that fit your vehicle, I recommend using the Yakima brand because of their excellent quality and how well they fit and install together. You didn't specify whether your vehicle has a naked roof or flush rails so I'll list out the parts you need for either roof style: Naked Roof - BaseLine FX Crossbars # Y56UV - BaseClips #...
  view full answer...
• Recommended Roof Rack for a 2018 Ford F-350 Super Duty With a Naked Roof
  For your 2018 Ford F-350 super duty with a naked roof, I recommend going with the Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars # Y56UV with the fit kit # Y06185. This roof rack system will work great with your naked roof, has a maximum weight capacity of 165-lbs, and has integrated t-slots so you can use roof mounted accessories as well.
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Malibu Sedan w/ No Roof Rails
  I would be happy to! To add a roof rack to your 2024 Chevrolet Malibu with no roof rails you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06123 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
  Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger
  The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
  view full answer...
• Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad Platform
  We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• Are Yakima Same Key System Keys Unique
  The keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
  view full answer...
• Roof Rack Recommendation for 2023 Ford Ranger with Naked Roof
  I attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
  The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?
  The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
  view full answer...
• Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford Ranger
  Yep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
  view full answer...
• Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline Towers
  You're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Parts Needed to Add Yakima CoreBar Roof Rack to 2021 Ford Ranger
  You'll just need to add a couple parts to your 2021 Ford Ranger to use the Yakima CoreBar Crossbars # Y00421: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06124 The only other thing you may want (which is optional) are lock cores to secure the rack to your Ranger and help protect your investment; you can do so with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...
• Recommended Roof Rack for a 2024 Chevrolet Silverado 2500 Crew Cab
  To add a roof rack to your 2024 Chevrolet Silverado 2500 Crew Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 I have attached a couple of pictures below that will give you an idea of what this system will...
  view full answer...
  
• How to Add Crossbars to a 2024 GMC Sierra 3500
  To add a roof rack to your 2024 GMC Sierra 3500 Crew Cab or Double Cab, you will want the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same...
  view full answer...
• Roof Rack for 2017 Chevy Spark
  There is a roof rack option for your 2017 Chevy Spark but the SportRack # SR1002 is not a fit. Instead, I recommend an option from Yakima. This rack consists of the Yakima CoreBar Crossbars # Y00421, BaseLine Towers # Y28TR, and Fit Kit # Y06124; you can lock this roof rack with SKS Lock Cores # Y07204. This will give you an aero roof rack that helps reduce the amount of wind noise you might otherwise encounter.
  view full answer...
  
• Parts For Single Bar Roof Rack & Single Bar Ladder Rack on Retrax XR Tonneau on 2024 GMC Sierra 3500
  Okay, this is going to be quite a few parts but I'll go ahead and list out everything for a single bar roof rack and single bar ladder rack for your 2024 GMC Sierra 3500 and the RetraxPRO XR Hard Tonneau Cover # RTT-80485: Roof Rack Parts - Yakima BaseLine FX # Y83TR - BaseClip Fit Kit # Y06124 Ladder Rack Parts - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y47TR - Replacement Tower for Yakima OverHaul HD Truck Bed Ladder Rack # Y67TR - Tonneau Cover Adapter Kit...
  view full answer...
• Can Old Yakima Round Crossbars And Q Towers Be Used With New System On 2024 GMC Sierra 2500HD?
  Hey there Bill, I got good news and some bad news. The good news is that we can piece together a kit and you can re-use your old Yakima crossbars since they are the same diameter as the new ones. The bad news is that you are correct in saying the Q towers won't work with your new vehicle so you'll need the new ones. The complete kit for your 2024 GMC Sierra 2500HD with naked roof is as follows, and remember you already have the crossbars so you technically do not need to buy more: -Yakima...
  view full answer...
• Recommended Roof Rack for a 2024 Chevy Silverado 2500
  To add a set of crossbars to the roof of your 2024 Chevy Silverado 2500, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Aero Crossbars - Black - Qty 2 item # Y99UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y27FR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. It fits both the crew cab and double...
  view full answer...
• What Are the Dimensions of the Yakima BaseLine Towers With the Crossbars and BaseClip
  Kason, the BaseLine Towers for Yakima Crossbars # Y28TR (4") paired with the BaseClip Fit Kit # Y27FR & # Y06124 (1"), and the Yakima JetStream Crossbars # Y00430 will leave you with approximately 6 1/2" from the top of crossbar to the top of your roof. You can take an inch and an eighth off that to get the measurement from roof to the bottom of the crossbar so that'd be 5 3/8".
  view full answer...
• How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel Towing
  Generally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
  view full answer...
• Best Roof Rack and Four Fishing Rod Holder for a 2019 Ford Ranger
  The roof rack I recommend for a 2019 Ford Ranger is the Yakima JetStream Crossbar System which consists of part # Y00425, part # Y28TR, and part # Y06124. The Yakima JetStream Crossbar System is one of the best options on the market which has aero shaped crossbars which work to reduce wind noise/drag and rubber padded feet to protect the vehicle's finish. The fishing rod carrier I recommend for the 2019 Ford Ranger with Yakima JetStream Crossbar System is the Yakima ReelDeal Rooftop Fishing...
  view full answer...
• Roof Rack For 2020 Ford Ranger to Install Yakima LockNLoad Platform
  We can get you set up with everything you need for your 2020 Ford Ranger so you can use the Yakima LockNLoad Platform Rack for Crossbars # Y05044-39. I checked with Yakima for you, and this the 55" long x 49" wide LockNLoad, which is the correct size for your truck. To mount it, all you will need is a Yakima roof rack, and you won't have to do any type of drilling as the LockNLoad will fit directly on the roof rack's crossbars. The correct roof rack for your 2020 Ranger is made up of the...
  view full answer...
• Solution for Using Yakima RoundBar Crossbars With Q-Towers on 2024 Silverado
  Hi John; Yakima moved away from using the Q-Towers back in 2016. This means there are no Q-Clips that will fit your 2024 Silverado. Assuming you have a 1500/2500/3500 with the Crew Cab or Double Cab you will need the BaseLine Towers for Yakima Crossbars # Y28TR. You will also need the BaseClip Fit kit. For the 1500 that will be two of the # Y06110 and for the 2500/3500 the # Y27FR and # Y06124. The last thing you will need is the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
  view full answer...
• Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500
  For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
  view full answer...
• Are Yakima Same Key System Keys Unique
  The keys that come with the Yakima Same Key System (SKS) Lock Cores # Y07204 are not universal and will help prevent theft. On our site alone we have over 50 unique keys for replacement options so it isn't like there are 2-3 different possible keys someone could use to get the rack off. If you're planning to add the # Y00426 to your 2022 Ford Ranger you will also need the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06124. You will be able to add the SKS Lock Cores # Y07204 to...
  view full answer...
• Roof Rack Recommendation for 2023 Ford Ranger with Naked Roof
  I attached a link to a page that has all of the roof racks that fit your 2023 Ford Ranger with a naked roof like the Yakima JetStream rack part # Y00428, # Y28TR, # Y06124. When we had the chance to test fit all of the roof racks we carry we all agreed that the Yakima Jetstream was the nicest so you'd be very happy with this option.
  view full answer...
• Roof Rack Recommendation with Longer Crossbars for 2020 Chevy Silverado 3500 Long Bed
  Yakima has roof racks that do fit your 2020 Chevy Silverado 3500 Crew Cab like the HD bar rack part numbers # Y01157, # Y28TR, # Y03541, # Y27FR, and # Y06124 which gives you a 60 inch bar setup with plenty of weight capacity. This would be best way to carry the accessories you have now as the ladder racks have wider bars than what standard roof rack accessories can fit. Then for a fold up tonneau cover the BAKFlip F1 part # BAK37FR would be a really great option as well that is confirmed...
  view full answer...
• Roof Rack Recommendation for 2024 Chevy Silverado 3500HD to Carry Yakima Showdown
  Hey Ross so I would recommend going with a Yakima JetStream roof rack for your 2024 Chevy Silverado 3500HD that consists of part numbers # Y00426, # Y28TR, # Y27FR, # Y06124 as we have found the Jetstream racks are the nicest and easiest to use. And we also know the Yakima Showdown part # Y04081 was tested with this rack and works great as well.
  view full answer...
• RetraxONE XR Compatible Ladder Rack and Roof Rack Accessory Recommended for 2020 Ford Ranger
  The # RTT-60335 RetraxONE XR hard tonneau cover you'd looked at would be a great choice for your 2019 Ford Ranger. For a ladder rack, I'd recommend the Yakima OverHaul HD, part # Y01151-58. You'll also need the adapter mount, part # Y01155 which allows the ladder rack to mount to the rails incorporated into the RetraxONE XR tonneau cover. Yakima tells me that the 68 inch crossbars included with this ladder rack are what's recommended for the Ranger pickup, and would be compatible with the...
  view full answer...
• Recommended Roof Rack for a 2024 Volvo S90 w/ No Rails
  To add a roof rack to your 2024 Volvo S90, that does not overhang the side of your roof, you will need the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Aluminum - Black - Qty 2 item # Y59UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 item # Y06124 This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft.
  view full answer...
• What is the Most Economical Roof Rack for My 2021 Ford Ranger with a Bare Roof?
  The most economical rack that doesn't require drilling for your 2021 Ford Ranger with a bare roof requires the following parts: - Round 48" CrossBars for Yakima Roof Rack System (QTY 2) # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06124 - (Optional for extra security) Yakima Same-Key Lock...
  view full answer...
• Largest Rhino-Rack Pioneer Platform For Crossbars on 2020 Ford Ranger
  Yep, the largest Rhino-Rack Pioneer for crossbars that will fit your 2020 Ford Ranger is indeed the 58" x 47" option: - Rhino-Rack Universal Pioneer Platform Rack for Crossbars # RR42115BF The Pioneer is a really nice system which allows you to carry a lot of gear in a number of different ways; to tie down that gear you can use the Ratchet Strap Kit # RR43175 and/or the Eye Bolt Kit # RR43178. If you also need a roof rack on your '20 Ranger for the Pioneer, go with the Yakima which consists...
  view full answer...
• Parts Needed for Removing Lock Cores for Yakima Same Key System SKS Baseline Towers
  You're looking for the Replacement Control Key for Yakima Same Key System # Y8007835, which will allow you to move lock cores from your existing Yakima towers to your new Baseline towers. This disengages the splines on the lock cores to allow them to be removed from towers, bike racks or cargo boxes equipped with Yakima SKS locks. It looks like you've got a 2019 Ford Ranger so the complete Yakima roof rack kit for your vehicle that uses the Yakima 48" Roundbars # Y00408 you were looking...
  view full answer...
• Recommended Roof Rack for a 2020 Chevrolet Silverado 3500
  The roof rack I recommend for a 2020 Chevrolet Silverado 3500 is the Yakima Jetstream Crossbar System part # Y00426, part # Y28TR, part # Y06124, and part # Y27FR. This is an excellent option and will work well with the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 so long as you alternate their direction. The system is a custom fit so it will look nice on the roof of a new vehicle and it has aero crossbars for the best wind resistance.
  view full answer...
• Parts Needed to Add Yakima CoreBar Roof Rack to 2021 Ford Ranger
  You'll just need to add a couple parts to your 2021 Ford Ranger to use the Yakima CoreBar Crossbars # Y00421: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06124 The only other thing you may want (which is optional) are lock cores to secure the rack to your Ranger and help protect your investment; you can do so with the Yakima Same Key System (SKS) Lock Cores # Y07204.
  view full answer...
• Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford Ranger
  To install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
  view full answer...

Do you have a question about this Roof Rack?