Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter
This item does not fit your vehicle
2013 Ram 5500
These items fit your vehicle
2013 Ram 5500
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Few upgrades make as big a difference in control as a solid rear sway bar. The 1-1/2" diameter Roadmaster bar ties the rear axle to the chassis to balance weight transfer and cut down on lean in turns. Built from thick 4140 chromoly steel, it’s considerably harder and stronger than the 1020 steel that comes stock, so it resists flexing and keeps the rig level through curves, quick maneuvers, and uneven surfaces.
That uneasy drift when a semi blows by or a crosswind hits is where this setup shines. By minimizing side-to-side movement, the bar keeps the vehicle planted and centered, reducing the effort it takes to hold your line on long stretches. Less correction at the wheel means less tension in the driver’s seat and a smoother, more predictable ride.
This isn’t a part that gives up over time. The 4140 chromoly steel bar delivers superior torsional stiffness, and the polyurethane bushings outlast standard rubber by resisting wear from oil, gas, and ozone. Less give means more consistent support and better tracking, mile after mile.
The kit includes the mounting hardware, lubricant, and instructions for a direct bolt-on fit. It attaches to the rear axle and chassis with no drilling, working cleanly alongside most popular suspension add-ons or accessories. Once it’s in place, you’ll feel the improvement right away.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
I love this sway bar, and love the service and overall experience with etrailer. My F350 came with factory sway bars front and rear, and I'd replaced the rear bar several years ago, and was impressed with the difference it made. So, more recently I ordered the front bar to replace the smaller factory unit, and it again made a wonderful change for the better. Our Bigfoot truck camper is tall and heavy, but our rig handles wonderfully and has essentially no sway or rock in traffic or on bumpy roads. I highly recommend this sway bar.
After a year of usage, I couldn't be happier with the Roadmaster front and rear anti-sway bar kits. The rear kit for my W22 chassy, the mounting hardward would not fit properly. I call Roadmaster directly and they custom built the mounts, painted, and shipped within days.
Grate stuff. Easy to bolt up and figure out. Drive quality improved dramatically and less sway with trailers.
Just in the kit with the grease and red lock tight the hardware washers were one size to large so I got the right ones and installed all is well.
Easy installation ,done by myself laying on my back in the driveway only took about 1 1/2 hours to do. I have a lift but didn't use it and I think it was easier on the ground for just one person. Sway bar made a big difference in the drivability of my 2003 E350 pleasure way class B
I'll upgrade the front factory bar to the HD Roadmaster bar soon
If you have issues with the handling of your Ford pleasure way start with this sway bar
This is a must have for your Motorhome. What a difference in the ride of the coach through the highway washes, the side winds and the side drift of the big rigs. This bar reduces the coach movement by as much as 80% I would say. The installation is easy for someone who is mechanically inclined and still doable for DYIer as long as you have the tools ( standard 1/2” drive tool set, low speed high torque drill for the holes in the frame and a 250 plus ftlbs torque wrench). I would highly recommend this Anti-Sway Bar.
a quick fix it to install sway bars front and rear.
I did this and just came home from 2400 mile trip.
installed rear only before we left, then at our destination installed front.
the drive back it handles wayyy better and it sits level now.
""your results may very-use at your own risk. ""
from etrailer.com
rear = RoadMaster 1259-109.
front = RoadMaster RM-1259-105 with RM-590063-00 bracket kit.
i'm sure over time they will flex and stress and start to lien again.
But for now it looks much happier. ( and level )
and i'm very happier with performance and drivability
Seems the big bars help distribute the load to both sides,
you can drive it with one hand now.
and when a truck passes, it's very manageable.
( this could be part the tires on it )
these can be installed in about 6 hours pretty easy.
The hardest thing is drilling the 8 holes in frame. ( 4 front 4 rear. )
We had to shift 2 brake lines over via and small bracket and covers lines with old fuel like to act as wear buffer.
Received the product in a timely manner. The shipping company used I’d give a no star rating. I received the anti-sway bar bare out of a box or wrapper with the installation part box and a cut out piece of cardboard with the shipping label on it taped to the bare bar with about five yards of packing tape. The bar was scuffed, scratched and chipped with the RoadMaster label destroyed. I realize it’s going to be installed under the front of my motorhome but as much as it costed I would like to be the one to scratch and scuff it. If I was a company installing this on a customers vehicle I’d return it. I do not believe it was shipped from etrailer in this condition.
Great buying experience with ETrailer. Fast shipping and quality constructed part. Noticeable difference in controlling body sway. Very pleased with the bar and highly recommend Etrailer.
I have carried a truck camper for 7 years with just Timbrin blocks also from Etrailer and finally made the move to Roadmaster anti sway bars front and rear. Planning a trip to the west coast from Georgia next year and wanted all the help I can get for stability on the mountain roads. Have yet to test but Im sure it will be a noticeable improvement. When my wife takes the wheel so I can have a break she would see-saw the steering wheel to balance the load and it drove me insane. Hoping for relief for both of us.
RM-1109-121 Rear Sway bar for 85 Chevyvan G30 RV. Install was pretty straightforward. I would mount the brackets to the frame first and then the sway bar to the axle. It’s easier to drill the holes without the sway bar getting in the way.
Before I replaced the shocks and upgraded the from sway bar and added the rear sway bar my G30 Chevyvan Winnebago was a wallow wagon. It took 110% focus to drive. Now it drives like a regular vehicle. Smooth. No leaning over when cornering. It’s night and day.
Good service answer all my questions
Minimized the sway making for a safer r ide.
I was pleased with the reduction and sway after installing the sway bar.
Purchased this sway bar a year ago. Installed it myself which was relatively easy. Noticible improvement in sway over the oem bar.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.