Stylish, sleek dinette tabletop has white wood-grain finish that matches the decor in your RV or camper. Edge banding seals out moisture from a spilled drink so the tabletop won't peel or crack. Leg kit sold separately.
Features:
Specs:
Need to directly replace the scratched-up etrailer dinette tabletop in your RV? Or perhaps you just want to upgrade to a stronger, more durable tabletop surface? This wood-grain laminate dinette tabletop provides you and your family with a level, sturdy surface in your RV or camper to enjoy meals, play board games, or work on your laptop. The tabletop's high-density EPS foam core is strong enough to hold up through years of family dinners. And the contemporary, white finish will look great with the decor in your RV.
Looking for a complete table with legs? We offer this tabletop with a single leg kit (e24UR, e57UR) and a dual leg kit (e42BR, e52BR) as well.
Unlike other furniture that have raw wood edges, this long-lasting tabletop has edge banding trim around all 4 sides to prevent peeling, cracking, or warping. That means it won't break if one of the kids accidentally drops a drinking glass, and it'll seal out the moisture from the spilled water. The color of trim matches the rest of the tabletop, which gives you a clean, seamless look.
There are 3 white circles on the back, which give you a general suggestion for where to mount your existing leg kit. For the best table stability, we recommend installing a 1-leg kit onto the middle circle and a 2-leg kit onto the outer circles, or no more than 24" apart. But you can install the leg kit anywhere along the internal steel mounting plate. The 30" x 10" plate will help improve screw retention for when you attach the leg kit to the tabletop.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, This is Jeff at etrailer.com. Today I'm gonna take a look at this replacement etraIler 44 inch by 30 inch white wood RV dinette table. Now, this part here will replace or upgrade the table top on your etrailer RV dinette table or can be used with other dinette brands of the same size. It is designed to work as a direct replacement for the etrailer dining tables. Part number E-24 UR and E-57 UR. Both of those, we do sell separate on our website.
Now this is just for the tabletop. It will require one or two table leg kits for a complete setup. Those table leg kits we do sell separate on our website and they are listed on this product page as a related product. If you want the flush mount table leg, that part number is E-69 RR. If you want the surface mount table leg kit, that's E-79 RR.
Now, this is an ultra-strong, high-density, EPS foam tabletop core. It ensures durability and stability. You can see it has a nice white wood grain laminate. Provides a nice perfect accent color for your existing decor. I did want to show you the edge banding on this that goes around the whole outer edge.
If we zoom in a little bit, you'll be able to see this edge banding will help reinforce the table sides and it seals the moisture out. Helps prevent the tabletop from peeling, cracking, or warping. Now, I do want to turn it over on the underside to show you the mounting spots. Basically, we flip this over. You'll notice there's three large circles and basically those circles are letting you know where the internal screw plate is on the inside of this table top.
They do have a bracket that your table leg will screw to and these circles will show you where they're located. So, basically what you'll do is take your table leg. If it's just for one table leg you'll use the center circle. Mount your one table leg up there and then put the screws into, hold it into place. Those internal screw plates assist with the screw retention when you're attaching that table leg. If you're gonna attach two legs then you use the two outer circles. Now, this part is made in the U.S.A. A few specs on it. The dimension, lengthwise, is 44 inches long. Widthwise is 30 inches wide, and the thickness on this is one and a quarter inches thick. Total weight on this table top is 20 pounds. But that should do it for the review on this replacement etrailer 44 inch by 30 inch white wood RV dinette table top..
To be honest with you, I think the table top by itself was pretty high priced. But we have fast delivery and in excellent condition.
We love the table top but a came with a little chip it should be packaged with foam all the way around, because I think UPS don’t care and probably damaged it.
Great Selection @ Great Prices w/ Free Delivery
It is pretty heavy. It weighs 23.5 pounds. I’m replacing my Airstream dinette table top, and that only weighs 11.5 pounds. I’m concerned about the ability of the pedestal to support it.
Appears to be very high quality and in perfect condition on arrival. It is about 1/2 inch wider than the original table in my Thor FW 23U, but I knew that when I placed the order.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.