bing tracking image
  1. RV Awning
  2. Solera
  3. Slide-Out Awnings
  4. 11 Feet Wide
  5. Black
  6. 128 Inch Wide
  7. 129 Inch Wide
  8. 130 Inch Wide
  9. 131 Inch Wide
  10. 132 Inch Wide
  11. 133 Inch Wide
Solera RV Slide-Out Awning - 133" Wide - Black
Solera

Solera RV Slide-Out Awning - 133" Wide - Black

Part Number: LCV000184673
In Stock
$587.84
RV Awning
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
Protect your RV slide-out from debris and keep moisture out of your siding with this slide-topper awning. Prevents water damage and mildew. Made for slide-outs that measure up to 11'1" from edge to edge. Includes all necessary components. Great Prices for the best rv awning from Solera. Solera RV Slide-Out Awning - 133" Wide - Black part number LCV000184673 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (1449)
  • Q & A (0)
  • Photos

Solera RV Awning - LCV000184673

Highlights

  • Keeps Rain and Debris Off Your Slide-Out: Shields seals and roof from leaves, twigs, and standing water to prevent leaks and mildew.
  • Moves With Your Slide Automatically: Extends and retracts in sync with your slide-out for hands-free protection every time.
  • Fabric Stays Tough in Any Weather: Heavy-duty 13.5-oz vinyl with heat-welded seams won’t crack down to -25°F.
  • Fits Large Slides Cleanly: Covers slide-outs 128"–133" wide with 48" extension for full roof protection.
  • Installs With Included Hardware: Comes with brackets, awning rail, and self-tapping screws for straightforward setup.
  • Maintains Proper Drainage: Mounts at a steep angle so rain runs off fast, avoiding stretching or pooling.
Made in USA

Features to know about

Keeps Rain and Debris Off Your Slide-Out: Automatic 133" Wide Topper

The Solera RV Slide-Out Awning - 133" Wide - Black shields your slide-out from leaves, twigs, and standing water that can damage seals or cause leaks. It automatically extends and retracts with your slide-out, so it’s always in place when you need it. The topper fits slide-outs measuring 128" to 133" wide with a 48" extension, keeping the roof clean and dry so moisture and mildew don’t creep into your siding.

Solera RV Slide-Out Awning in black installed above an RV slide-out, shown fully extended to illustrate coverage and design.

Built for All-Season Protection: Heavy-Duty 13.5-oz Vinyl Fabric

This topper uses premium 13.5-oz vinyl that holds up in rough weather and won’t crack, even in cold temperatures down to -25°F. The heat-welded seams stop leaks that stitched seams can allow, so rainwater drains off instead of soaking in. The black fabric and matching hardware give a clean, finished look while standing up to years of sun, rain, and road grime.

Close-up of Solera RV Slide-Out Awning black vinyl fabric showing durable, heat-welded seams and heavy-duty construction.

Simple DIY Install: All Hardware and Awning Rail Included

Everything you need comes in the box—brackets, hardware, and awning rail—so you can get it mounted without hunting for extra parts. The roller tube comes pre-assembled with the fabric already attached, saving time and frustration. Mount the awning rail up to 5" above the slide box trim, and use the self-tapping screws to secure the access plate and brackets. With a helper, you can have it installed in just a few hours.

Sized Right for a Clean Fit: Designed for 128"–133" Wide Slide-Outs

This awning rail measures 133" long, and the fully extended fabric is 133" wide by 48" long. You’ll need at least 7" of clearance on both sides of your slide-out, or 14" total if two slides are next to each other. If space is tight, dropping to the next size down still provides plenty of coverage. The brackets extend about 2-1/2" past the fabric on each side, giving full protection without interference.

Reliable Coverage That Moves When You Do: Automatic Extension with Slide-Out

Once installed, the topper works seamlessly every time you set up or pack up. It extends automatically when your slide moves out and retracts when you bring it in, so you don’t have to climb up or sweep off the top each time it rains. This self-storing design keeps your setup simple and your slide-out protected trip after trip.

Specs

Application

  • Application: slide-outs 128" - 133" wide with 48" extension
  • Minimum clearance needed: 7" on both sides of the slide-out (order next size down if needed)
  • Clearance between 2 slide-outs: 14" total clearance required

Diagram showing how to measure an RV slide-out from outer edge to outer edge to select the correct Solera slide-out awning size.

Dimensions

  • Awning rail length: 133"
  • Awning fabric dimensions (when fully extended): 133" wide x 48" long
  • Bolt hole diameter: 3/16"
  • Mounting bracket dimensions: see below

Installation photo showing how the Solera RV Slide-Out Awning attaches to the side of an RV slide-out using included mounting brackets.

Warranty

  • Warranty: 1-Year

Diagram showing mounting bracket dimensions

Note

  • Important installation tip: It’s important that the slide-topper sits at as steep an angle as possible so that any rainwater will drain immediately. Any water that sits in the awning can stretch out the fabric permanently and warp it out of shape.

V000184673 Lippert Solera 11'1" Slider (Slide-Topper) in Black w/ Black Hardware

Installation Details LCV000184673 Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.5

1449 reviews
5 Stars
(1095)
4 Stars
(186)
3 Stars
(55)
2 Stars
(37)
1 Star
(76)
Review Sort Icon
by:
I installed the slide awnings by myself - easy to do if you follow the instructions. The awnings work well. Also, etrailer people are great to work with.

I had trouble with shipment of one awning. The part was damaged because damage during shipping. I strongly recommend to take the awning out of the packaging and closely inspect asap after receipt. This is the reason I am not giving 5 stars.
by:
Very good product for the price. Good instructions on how to install and easy to install with the help of a friend. Highly recommend this product.
by:
Works well. Easy to install with help. Keeps rain / snow off slide.
by:
Works as advertised, and keeps the slide roof clean
by:
Michael profile picture

Michael

4/16/2025

Great

by:
Easy install ,works an looks great
by:
by:
by:
by:
by:
by:
by:
by:
The slide-out awnings were easy to install. One issue I encountered was with one of the set screws. There was excess paint in the threaded hole. I cleaned the threads with a tap and it worked fine.
Russell profile picture

Russell

7/21/2026

I have been using my slide awnings for a year now without any issues. I dont have to worry about sticks and pine cones getting on top of my slide outs. It keeps me from having to climb on top of the RV. I highly recommend these to everyone I see.

Christopher H. profile picture
Etrailer Expert

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is holding up well for you! Thanks for the recommendations and we hope you having a good summer.
Christopher H. profile picture
Etrailer Expert

Christopher H.

7/21/2026

@Russell Happy to hear the # LCV000165063 is working well for you! Hope you're having a great summer.
by:
I received the 121" awning a few months in delay, but this was not etrailer's fault. They kept in constant contact with me and I appreciate that. The awning came on an 18 wheeler and the extruded channel had been bent slightly, but easily fixable. The hardware pack was good and wrapped up nicely. Overall, a great purchase and easy to install like 2 hours with a friend. Watch the video for the installation tips it's very helpful. Definitely worth it!
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/20/2025

It looks like you nailed it with the install! I'm in "aw"ning, haha. Do you have any install tips you learned when you put on the awning?

Scott profile picture

Scott

5/20/2025

@BrookeM Have two tall ladders a good friend and a 12 pack of your favorite beverage. Also, make sure you have square bits for the hardware. It's not sent with #2 Phillips screws. Other than that, a straight forward install! Watch the video...helps a ton!
Brooke M. profile picture
Etrailer Expert

Brooke M.

5/22/2025

@Scott Haha I like that advice! Thanks, Scott. Enjoy your Memorial Day weekend! :)
Scott profile picture

Scott

5/20/2026

Still working great..keeps my slide out roof clean.

James D. profile picture
Etrailer Expert

James D.

5/20/2026

@Scott love to hear things like this, appreciate your reply and choosing etrailer!
by:
Perfect addition to our 2025 Lance Squire 1995. Took less than an hour for me to prep and mount the brackets and less than an hour for my son and I to mount the awning and clean up.
Robin H. profile picture
Etrailer Expert

Robin H.

10/7/2026

Thanks for the pictures and video, looks great!

by:
The solera slide toppers are the best! Mounting is very easy, just make sure to have two people with you. I did a 67" myself, but it was difficult feeding it into the track.
Lazer S. profile picture
Etrailer Expert

Lazer S.

3/24/2026

Glad you like it! And having more than one person is definitely a good idea. These things get pretty long and awkward. What did you install this on?

by:
Product is as expected. The product was received with scratches on the metal mounting brackets. This is disappointing since the brackets are 100% visible. I will try some wax to hide or diminish unsightliness. Improved packaging suggested. Directions for install were acceptable and there were online resources.
Barbara profile picture

Barbara

10/19/2026

Product is functionally working great. Paint and wax were required to diminish visible scratches.

Jameson C. profile picture
Etrailer Expert

Jameson C.

10/19/2026

@Barbara great to hear!
by:
Purchased this for our new 2025 Winnebego 2108DB trailer as a self install. Installation was very easy, easy enough I could install it almost completely without help. I did need a helper when fitting the roller into the brackets. Included instructions were clear and easy to follow. Since this is a new install, I can't comment on the durability of this accessory, but time will tell, it looks like it's of good quality.
Thomas profile picture

Thomas

6/30/2026

After a year of use, the slide topper awning still looks and works great. Youd never know it wasnt a factory install. So far, no signs the Arizona sun is deteriorating the fabric, although I try to treat it with 303 Protectant, and keep the trailer covered when not in use. Still very happy with my purchase.

by:
Fairly simple to install if you have a decent amount of handyman skills. Instructions could be better. Love how they turned out. Little insurance for my slide outs. Hope they last.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/21/2025

I think you are selling yourself a little short, Michael. Install looks like it was done by the manufacturer! Great job! Any more trips planned for the year?

Michael profile picture

Michael

10/21/2025

@LazerS Thank you for the kind words. I would have done better if it was someone else’s! I will be heading to the Lonestar Motorcycle Rally in a couple weeks.
by:
Delivery went well, slight damage to tube, contents were fine. Install was pretty simple, following video from etrailer. Very pleased with quality of topper n look of it on our Camper which is a 2021 Keystone Passport. I've ordered a few things from etrailer n haven't ever had an issue.
Michael profile picture

Michael

5/7/2025

Couldnt be happier with slide out topper. Keeping waterdebri off slide out, protecting seal which was the goal. Not one issue with item, working great after 1 yr n probably for years to come.

by:
Great product. Easy to install.
Gwendolyn Y. profile picture
Etrailer Expert

Gwendolyn Y.

4/30/2026

Looks great, Joel!

by:
I went camping to find in the morning that our slide topper had come apart in the middle. We have only a few trips out with it. This is clearly a part that was not glued properly or the glue failed and allowed the material to slide out in the middle. Really disappointed!
by:
Worst customer service ever. It took 6 different people to correct etrailer’s mistake even having to explain over and over their own part numbers they managed to get it wrong, they shipped me multiple different parts that were incorrect parts over and over. I finally order the proper parts from a different vendor who got it right the very first time. You will later be inundated with dozens of requests to “tell us how we did” well, etrailer did a crap job and are over priced too. They never stop harassing you to do reviews either
by:
Only complaint is the shipping tube lost one metal end and other end was all bent up. Need better ends for shipping tube. By this the awning end paint was scratched up! Lucky I didn’t lose any parts on the opened end of tube!
25
1449
true
Show More Reviews

See what our Experts say about this Solera RV Awning

  • Recommended Slide Out Awnings with Hardware Based on Measurements
    For your 111 inch slide out including flange, I recommend the Solera 10' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000251461 that is confirmed to fit. This is also available in white # LCV000163292. For your 132 inch slide out including flange, I recommend the Solera 11.5' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000184673. This is also a confirmed fit and is also available in white # LCV000163295.
    view full answer...
  • What Slide Toppers Fit 2024 Keystone Arcadia 242SLMD
    Hey Don, I would have to see a picture but basically there would need to be room for an awning rail under the gutter in order for a slide topper to fit. Based on your slide out dimensions the correct slide toppers you'd need are the part # LCV000168104 and # LCV000168326.
    view full answer...
  • Correct Solera RV Slide-Out Awning Measurements
    Hello, sorry for any confusion. For determining the proper size Solera Slider your project requires you need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the left/right side overhang). Yes you can have greater than 2-1/2" overhang if you want, such as the 3" stated, it is just suggested that you do not go any less in width. For the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - White, # LCV000163285,...
    view full answer...
  • Replacement Endcap For A Dometic A&E Slideout Awning
    Hey Randy, The arms on your slide-out awning have A&E labels so you'll actually have to reach out to Dometic because Solera and other brands use different size components, making them incompatible with each other. If you give Dometic a call I'm sure they'd be able to get you a new endcap or the whole spring/endcap/arm assembly, which definitely looks to be your issue. These awnings are under a lot of tension so you'll want to make sure when you remove the roller tube that you're very...
    view full answer...
  • Slide Topper For 2022 Grand Design Reflection 337RLS w/ Awning on Side & Slide Box
    Thanks for that photo it was super helpful, and let's start with the easiest thing first, which is the 3 inches of clearance you have on the sides. Since slide toppers need 7 inches of clearance on the sides, what you will need to do is order the next size down instead of the 139" # LCV000168328. Your slide topper will still have plenty of coverage over your slide, but this will allow you the clearance from the awning rail; so what you need is the following: - Solera RV Slide-Out Awning...
    view full answer...
    Image 1 for
  • Recommended Slide Out Awning For A Slide Out With Limited Mounting Bracket Space
    The newer brackets aren't currently sold separately but I've run into your situation a few times and have just placed the inner bracket on the t-molding instead of on the wall of the slide out. You'll want to get the lower holes in the bracket as close to the edge of the t-molding as possible so that the screws sit in the space between the slide out box and trailer wall. You'll also want to use some butyl tape on the backside of the inner brackets to prevent water from leaking in through...
    view full answer...
    Image 1 for Image 2 for
  • Clearance Needed to Install Solera Slide Out Awning LCV000184673
    Thank you for the photo, and I can tell you that the Solera RV Slide-Out Awning - 11'1" Wide # LCV000184673 does require at least 7 inches of clearance in order to install. Unfortunately, there is just no way to shorten the awning, so the best we can offer is a different size that you can use. Since the awning brackets stick out approximately 2-1/2 inches past the fabric you will want to consider that as well when deciding the proper length. - 127 Inch Wide Fabric: Solera RV Slide-Out...
    view full answer...
    Image 1 for
  • Solera Slide Toppers Available Sizes and How To Measure On a Jayco Eagle Travel Trailer
    To find the toppers for your Jayco Eagle HT 2835RSTS you will need to measure your 3 slide outs. The measurement will be from outside flange to outside flange. If you don't have at least 7" of clearance on both sides of your slide-out box, order the next size down. I can help you determine the correct size if you can send me the measurements of each of your slides along with images so I can help determine if any awnings or other items might be in the way. Solera RV Slide-Out Awning 57"...
    view full answer...
  • Correct Slide Out Awnings for a 2016 Jayco RedHawk Motorhome
    I would be happy to help you find some slide out awnings for your 2016 Jayco RedHawk Motorhome. We'll start with the 71" wide one if it is on the drivers side you will want the Solera RV Slide-Out Awning item # LCV000165063. If the 71" awning is on the passenger side you will want the shorter Solera RV Slide-Out Awning item # LCV000231482. This will still provide enough fabric to cover your slider. If your 137-1/2" slide out is on the driver's side you will want the Solera RV Slide-Out...
    view full answer...
  • Replacement Slider Awnings For A Montana Camper
    The 10' 10.5" replacement is part Solera RV Slide-Out Awning # LCV000184673, the 13' 7.5" replacement is the # LCV000168110 and the 8'8" is the # LCV000168325. I reached out to our supplier to confirm fit and given the flange measurements you provided the following awnings will replace the slider awnings for your Montana in black. I've included review and installation videos to help get you started.
    view full answer...
  • 2020 Jayco Eagle HT 30.5 MBOK 5th Wheel Slide Topper Recommendations in Black
    Slide out 2 would need the part # LCV000184673, slide out one would need # LCV000251461, slide out 3 would need # LCV000168104 and slide out 4 would need # LCV000168106 and you'd be set. These are all black as this is only color option we offer aside from white.
    view full answer...
  • Recommended Black Slide-Out Topper Awning for 2017 Grand Design Imagine 2950RL
    I'm happy to assist with the slide-out toppers for your 2017 Imagine. The 147.5 inch slide out will use the Solera 13' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000165061 and the 133 inch slide out will use # LCV000184673. These are based on the flange to flange measurements, so if you didn't measure from the flanges let me know.
    view full answer...
  • Determining The Correct Slide Topper RV Awnings For Your RV Based On Flange To Flange Measurement
    For the bedroom slide out with a 67.5" measurement you'll need part # LCV000165063. This will have approximately 5-1/4" of overhang (fabric/roller arms) on each side so you'll want to check for enough clearance prior to purchase. If there isn't enough room then you can size down to part # LCV000231482 instead for roughly 2-1/4" of overhang on each side. For the Living Room with a 149.5" measurement you'll want part # LCV000165061. This will have approximately 3-1/4" of overhang. For a...
    view full answer...
  • Slide Topper Recommendations For A 2018 Heartland RV Torque 5th Wheel
    For your 2018 Heartland RV Torque 5th Wheel, you can use the following: -For your 78.5" slide out, you can use the Solera RV Slide-Out Awning # LCV000168105. This slide topper is designed to fit slide outs that are 74" - 79" wide and up to 48" long, is black in color and will work great for you. -For your 127.5" slide out, you can use the Solera RV Slide-Out Awning # LCV000184673, which is also black in color and will fit slide outs that measure 128" to 133" wide. Finally, for your 144"...
    view full answer...
  • Recommended Slide Out Topper For A 138-1/2" Flange To Flange Measurement
    For a 138-1/2" flange to flange measurement I recommend the Solera RV Slide-Out Awning - 139" Wide - Black # LCV000168328. This will have approximately 2-3/4" of overhang past the slide out so you'll want to make sure that there's enough clearance on both sides of the box. If not you can size down to the # LCV000184673 and would need to play with it a bit to get it centered on the box. You'll want to pick up some butyl tape # AL28FJ to waterproof the mounting brackets as well. I've attached...
    view full answer...
  • How Far Do Brackets Stick Out for Lippert Solera Slide-Out (Slide-Topper) Awning
    The brackets for a Lippert Solera Slide-Out (Slide-Topper) Awning will extend out about 2-1/2" more than the awning fabric itself on either side. So the part # LCV000184673 that you mentioned, for example, has fabric that is 133" wide. This means that the edges of the brackets (or the arms that hold the roller) will sit about 138" apart from each other. If you can tell me the width of your box and the desired color you'd like I can recommend the correct-sized awning for your slide-out...
    view full answer...
  • Replacement Solera RV Slide Topper for 127-1/4 Flange to Flange Box Width
    For a box width of 127-1/4 inches, the 11-1/2 foot Solera Slide-Topper # LCV000163295 (white) or # LCV000184673 (black) is what you need. The box width is measured on the front, outside edge of outside edge, including the T-molding as shown in the attached photo.
    view full answer...
    Image 1 for
  • Correct Slide Topper Awning for a 131" Slide Out
    The correct slide topper awning for a 131" slide out (flange to flange) is the Solera RV Slide-Out Awning part # LCV000184673 for black or part # LCV000163295 for white.
    view full answer...
  • Installing Shorter Solera Slide-Topper Due to Clearance With Patio Awning
    If you do not have enough clearance room available between your slide and patio awning to meet the recommended minimum on a Slide-Topper, you can go with a smaller size but need to keep in mind that it will not provide you full coverage. For your 119-3/4 inch flange-to-flange measurement. We have the Solera RV Slide-Out Awning at 9'7" in black, # LCV000251461 or the # LCV000163292 in white. Please note the product review video that I attached below.
    view full answer...
  • Installing A Solera Slide Out Topper On Factory Installed C Channel
    I spoke with Lippert and their tech said most awning rails are a standardized size and that you shouldn't have any issues installing your # LCV000184673. If for some reason your C Channel is giving you too much trouble the # LCV000184673 kit comes with a J Channel you can easily install with a few screws. I recommend using Butyl Tape # 344270341410-1 to protect against any water damage.
    view full answer...
  • What Clearance Is Needed Between Slide Out Flange and Awning to Fit Slide Topper
    We've checked with Solera in the past and the minimum clearance for their slide toppers to fit with an awning is 3 inches like you have. So the # LCV000184673 (which is correct size for your flange width of 126.5 inches) will clear and work great on your setup.
    view full answer...
  • How to Choose Correct Slide-Out Slide Topper
    Slide toppers cannot be over sized, they do need to be the correct size. In order to find the right one all you need to do is measure your slide-out from outside of one flange to the outside of the opposite flange. For example, if you took that measurement and it was 76 inches you would need the Solera RV Slide-Out Awning # LCV000163285. Or if that measurement was 132 inches you would need the Solera RV Slide-Out Awning # LCV000184673. If you let me know what that measurement is I can...
    view full answer...
  • Recommended Slide Toppers For 87-3/4, 130-3/4, and 154-1/2 Slide Outs On 2017 Montana 5th Wheel
    I'd be happy to help! For your 2017 Montana 5th Wheel you'll need the following slide-topper awnings: 87-3/4" Slide out: # LCV000163288 for white or # LCV000168106 for black 130-3/4" Slide out: # LCV000163295 for white or # LCV000184673 for black 154-1/2" Slide out: # LCV000163300 for white or # LCV000168109 for black Butyl Tape # 362BT-18x1-50 You'll need to make sure you have at least 5" of clearance on each side for each slide out to make sure there is no interference with anything....
    view full answer...
  • What is Minimum Slide Topper Clearance from Box Width and Awning
    We've checked with Solera before and they've said that 3 inches of clearance is the minimum needed for their Solera slide toppers to fit. So if you have 3 inches it would be tight but it would fit. Based on your flange dimension being 129 inches the correct slide topper would then be the part # LCV000184673.
    view full answer...


< Previous
12



Do you have a question about this RV Awning?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Kathleen M
Video by:
Kathleen M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Ryan G
Video by:
Ryan G
Employee Chelsea B
Updated by:
Chelsea B
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Isabelle B
Updated by:
Isabelle B
Employee Carrie F
Updated by:
Carrie F
Employee Amanda K
Updated by:
Amanda K
Employee Randy B
Installed by:
Randy B
Employee Kristen H
Written by:
Kristen H
Employee Shane H
Test Fit:
Shane H
Employee David F
Test Fit:
David F
Employee Ethan H
Test Fit:
Ethan H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924