Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 3" Hub slides onto sewer pipe. Bayonet cap fits over the 3" lug fitting that connects to your sewer hose.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Valterra RV waste valve. This unit simply adds or replaces a waste valve on your RV's waste system. It's going to be made from a strong and durable black plastic construction. It does come with the end cap right here for the drain outlet. The cap is going to be tethered to the unit so you don't have to worry about accidentally losing that or misplacing it. The connection point right here for your drain hose, this is going to accept your standard three inch diameter drain hose with a bayonet style fitting. That's got four attachment prongs on there.
Then you're going to have the easily accessible handle up here that's a t-grip handle. That's going to open and close the gate. The other side that connects to your RV's plumbing system. This is going to accept three inch standard plumbing pipe, so what we can do is simply take an internal measurement of that. As we do, you'll see that that is going to give us a measurement internally of about three and a half inches.
That's the diameter there, inside edge to inside edge, so your plumbing pipe on your RV, that's going to have an internal diameter of three inches. That's going to have quarter inch wall tubing on it. When you combine that three inch inner diameter with a quarter inch on each side of the tubing, that's where we get the three and a half inch diameter from, which will fit perfectly inside of the connection point here on this waste valve. Overall, it's a nice structural design. The hardware's included. The unit's already pre-assembled.
The t-handle's going to make opening and closing the gate quick and easy. The unit's already assembled and it has the appropriate seals internally to offer a leak-proof performance. The last thing I want to mention is I just want to go over some overall measurements with you. What we can do is I'm just going to take and overall length measurement of the unit with it closed and then with the handle fully extended. When we do that from edge to edge, we're looking at a measurement of about nine and a half inches. When we extend that out, that's going to increase it to around 13 inches.
That's going to do it for today's look at the Valterra RV waste valve.
Do you have a question about this RV Waste Valve?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.