Video Transcript for Add-A-Step for TorkLift GlowStep Revolution Uprising Steps w/ 24" Base Feature Review

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this TorkLift Add-A-Step. This is going to add one additional step to your TorkLift GlowStep Revolution Uprising Fold-down Steps. This will fit with the 2-to-5 step models with the 24 inch wide mounting bases, including the two models that you see on the screen there, and thanks to the TorkLift steps' modular design, this is gonna be extremely simple to get installed. Basically, you're just going to have to remove the bolts that are connecting two of your current steps together, and then fit this in between them, and put it all back together. You are gonna get all the hardware that you need as well as instructions on how to put it all together to make sure everything goes well for you, but this is gonna be the exact same kind of step as what you already have, so it is gonna fit right in, after you get it all assembled, you'll probably forget that you even added a step to it.

It's the same aircraft-grade aluminum and stainless steel construction, so it is gonna be very durable and rustproof just like the original's. It's got a step platform dimension of 18 1/2 inches by 8 1/8 of an inch deep, so this is gonna give you the same amount of placement for your foot. It does have this built-in SureGrip tread to help provide more sure footing for you, even if it's like outside, you can see, we do have the glow tape on the corners there to help identify the edge of the step, so if we're walking up and down in dark or low light conditions, we'll be able to see where the edge of the step is, so that we'll have less tripping hazard. The bushings are going to have the nice long lasting lifespan, more than your standard riveted connections just like the original. So everything is going to be exactly the same, so it is gonna fit right in place, you're gonna get that additional step, so if you've switched your steps or you found that they're just a little bit too short, you need to add another one in, rather than having to buy a whole new step set, this is going to allow you to customize those steps for your setup.

So this is made here in the USA, you can trust it's made to the high quality standards that we've come to know and trust for products that are made here in the US, and it also comes with a lifetime warranty, so if you we're to ever have any issues with it, you're more than welcome to reach out to us here at etrailer.com. We're always happy to work with our customers to make sure you're getting good quality products and having a good experience. So if you are needing to add another step to your step set, this is gonna be exactly what you need. That's gonna complete our look for today. Again, I'm Michael with etrailer.com.

Thanks for watching..