Can EZ Valves be Removed from Valterra Electric Waste Valves and Replace Current Waste Valves

Updated 01/14/2019 | Published 01/13/2019

Products Featured in This Question

Valterra EZ Valve Double Electric Waste Valves - Rotating - (2) 3" Hubs to 3" Lug Fitting

(124)

$427.32

Valterra ABS Solvent Cement - 1/4 Pint

(204)

$21.29

Question:

Hi, i cannot find 2 valves with the double switch. Can I take the valves off the wye, remove my old manual valves and install this in its place.

asked by: Andrew

Expert Reply:

If both of your current waste valves are for 3" sewer pipes then yes, you can definitely remove the valves from the Valterra EZ Valve Double Electric Waste Valves # E84-8 and install them in your WYE fitting.

If you have one 3" and then a smaller 1.5" on your WYE fitting then this will cause problems as the 3" valves are bigger than the 1.5" vlaves. They don't use universal valves.

You can possibly use some adapters though and fit 3" sewer pipes around 1.5" sewer pipes if you really want to use this setup though. You would just need to make sure that everything seals properly with ABS Solvent like part # A05-0303.

expert reply by: Jon G