Video Transcript for Review of the Easy Grip Assist Handle

Today we're going to be taking a look at the easy grip assist handle from Polar Hardware. This handle is made from a polished stainless steel construction. It's a nice, strong durable design and it's going to be highly resistant to rust and corrosion. Now the grab handle is going to enhance your safety and stability as you climb into your enclosed trailer, your camper, or your RV. The diameter of the handle, right here in the middle section is going to be about one inch. ON the underside it's going to feature finder indentations, that's going to give the handle an easy grip design.

Now your mounting hardware is not included. The unit's going to contain two pre-drilled mounting holes, one located on each end. The diameters of those holes is going to measure three eighths of an inch. The width of the mounting platform or mounting area, that's going to measure an inch and a half wide. Those mount holes are going to be separated on center, by about thirty two and one quarter inches. The overall length of the unit, it's going to measure pretty close to thirty four inches long.

The grab area measuring from one cure, right here at the beginning to the same point on the other side, that's going to give us a measurement of about twenty four inches, so a twenty four inch grab area. The handle is going to sit about three inches off the mounting surface, so from the tabletop to the top of the handle, we're looking at about three inches. From the tabletop to the underside we're looking at about two inches. That's going to do it for today's look the easy grip assist handle from Polar Hardware.