Video Transcript for What to Know About the Easy Grip Assist Handle

Today we're going to be taking a look at the easy grip assist handle from Polar Hardware. This handle is made from a polished stainless steel construction so it's going to be very strong and durable as well as highly resistant from rust and corrosion. Now the grip handle is really going to enhance your safety and stability as you climb into your enclosed trailer, camper, or RV. The diameter of the handle is going to measure about one inch. On the underside it's going to have finger indentations, this is going to allow for an easy grip design. It's going to contain two mounting holes, those are going to be pre-drilled, one on each end, those are going to have a diameter of three eighths of an inch.

Mounting hardware is not included. If we take a measurement of the distance that we have between the mounting holes, measuring center on center, that's going to give us a measurement of about twenty six and one quarter inches. Then the overall length of the unit, it's going to measure pretty close to twenty eight inches long. Taking a look at the actual grab area, so from the start of one curve, measuring to the same point on the other side, that's going to give us a measurement of right around eighteen inches. That's going to be the grab area measurement. Now the grab handle is going to sit three inches off the mounting surface.

Measuring from the tabletop to the top of the handle, measured at about three inches and then from the tabletop or the mounting surface to the underside is going to be around two inches. The width of the mounting platform, measuring this area right here, measuring that width, that's going to be about an inch and a half wide. That's going to do it for today's look at the easy grip assist handle from Polar Hardware.