Pull-down spout on this kitchen faucet rinses that tough food residue off your plates and then self-retracts with the adjustable hose weight. Maintenance-free, diamond ceramic disc cartridge helps prevent the faucet from dripping and wasting water.
Features:
Specs:
Pull the spout down so you can easily tackle that food caked onto your plates or rinse the sides of the sink from any angle. Toggle between the stream and spray options depending on how much pressure you need or how long that food has been sitting there. When you're done using it, the spout self-retracts with a hose weight that can be adjusted anywhere along the spray hose. And so the spout doesn't swing around while you're traveling to the next campsite, you can use the integrated retaining bar to secure it in place.
Depending on your setup, you'll need either the built-in round deck plate for a 1-hole installation or the included oval deck plate for a 3-hole installation. To install, use the inlet shank and drop the new faucet and a deck plate in place of your existing faucet. Then tighten the mounting nut onto the shank so that the washer is in between the nut and the underside of the counter. Finally, install the hose weight, thread the pull-down head's hose onto the faucet's center inlet, and connect the braided hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everybody. Welcome to etrailer.com. I'm Bobby. And today we're taking a look at empire faucet, stainless RV, kitchen faucet with hammer style, pull down spout. Now this is going to go ahead and allow us to quickly replace our older faucet in our RV without too much trouble with installation. It's made of a stainless steel construction, which can ensure we stay free of corrosion.
And it also utilizes the diamond ceramic disc cartridge, allowing our water to mix in the cylinder and overall reduce the amount of maintenance required to keep it in working order, especially compared to other types of faucets. This is also what allows us to go ahead and utilize our single, single lever design. The gooseneck spout offers us 360 degrees of revolution, which can be great of course, to fix our needed position. Now, with that though, guys, I would be careful of over rotating it. As you can start disrupting your water lines here, taking a look at them themselves.
You can see, we do have that half inch fitting for our male inlets for our water connection. And they also are going to be made of a braided stainless steel construction that we wouldn't have any kinks or binds in our lines. And also we won't be combating corrosion. Now you will notice here too. We do have that drop-down spout, which can be great to go ahead and give us a lot of access for ourselves.
One thing with two on the very end there you are seeing a little weight there for ourselves. So as I pull this down, that weight's going to pull it right back up in place for ourselves. Now, the one thing I will say with this guys too, it does have this nice kind of stand here for ourselves to go ahead and put in our spout and bring it into position. However, if you guys are in an RV and you are finding yourself moving and inside your RV with you at all times, I could see this having a little bit of a noise issue just because it might just rattle ever so slightly. It might be far enough away from you guys and not be causing any kind of problems.
Just keep in mind as you are traveling, you might see just a little bit of movement there and start hearing it as we go. Of course, we do have our nice little plug in to go ahead and cut off our stream for ourselves to go ahead and give ourselves a nice different spray. I should say not cut it off guys. We'll just go ahead and actually change our style of spray here as you guys can see on that insert. So that can be a great little way of just giving us varying pressure to clean our dishes. Well, let's go ahead and start breaking down some of our dimensions here. For our overall width, we're going to be taking our inside assembly here, not accounting for our disk, so we can go ahead and see what exactly width we're working with and it five inches and five and one quarter inches there. Definitely not going to be the largest width we've seen. And for our plate width here, we can go ahead and put ourselves at nine and three quarters of an inch while our thickness of our plate sits at three eighths of an inch. Now our overall height of our spout right there in the middle is going to be putting us at 20 inches. Now our spout length from center. Will find itself right at nine and a half inches. Now our male water line connections again, guys will be at that half inch fitting. Now we do offer a variety of colors in this model. So be sure to check out which option fits you best. If you're looking at these Springs and wondering exactly what they're for, they're mainly for aesthetics. However, they can be nice to go ahead and just give us a little bit of play there so we can go ahead and actually move it. Of course, that offers you a slight advantage over your static models. Well, guys, I think that that about does it for our look at the empire faucet stainless RV kitchen faucet with hammer style, pull down spout here at etrailer.com. I'm Bobby, thank you for watching..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.