Build an RV sliding cargo tray with this trim kit, a rail kit (sold separately), and a plywood bottom (not included) to easily retrieve gear without crawling into your compartment. Included trim pieces prevent cargo from sliding off during travel.
Features:
Specs:
Pair this tray trim kit with a rail kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. The complete tray lets you store and organize camping and hiking gear, tools, and power cords, so your compartment doesn't become too cluttered. It also glides out when you need it so that you don't have to crawl into the dirty or cramped compartment in order to retrieve your belongings.
Determining Which Tray Trim Kit and Rail Kit You Need
To figure out which tray trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. For example, for this 32" trim kit, your cargo compartment should measure at least 36" wide. This ensures that the tray would have the proper clearance as it slides in and out. If your cargo compartment is wider than 32", you will need a SuperSlide I or SuperSlide II tray trim kit.
The rail kit needed to complete your storage slide-out tray assembly is sold separately (LC370393, LC370394). To determine which rail kit you need, simply measure the overall inside length of your cargo compartment. Whatever measurement you get is the maximum length of the rail kit that you will need.
This trim kit includes 2 end trim pieces. The rail kit (sold separately) comes pre-assembled. First, mount the end trim pieces to the assembled rails using rivets (not included). Once the carpeted wood bottom (not included) has been installed and the tray has been completely assembled, place it onto the floor of the cargo compartment. Make sure there's adequate clearance for the compartment door. Depending on your setup, you may need to raise the rails with 2x4s (not included). Once the tray is fully aligned, use the integrated mounting tabs on the rails and hardware (not included) to bolt it down.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look together at this Kwikee tray trim kit. Now this trim kit is going to pair with a rail kit, which is sold separately to form a slide-out tray for your RV or camper's cargo compartment. This is going to require a carpeted, covered plywood, which, again, is not included with this, for the bottom to let you store and retrieve camping and hiking gear, tools and power cords, all without crawling into the compartment. Now this is going to fit cargo compartment openings as you see there on your screen of 36-inches wide. And then when you have this fully assembled, the tray weight capacity is gonna be 200 pounds.
And these two end-trim pieces are going to help prevent your belongings from sliding off the tray during travel. And then just to give you some measurements, let's begin with the larger trim piece first, and I just wanna give you the overall length here. So, end-to-end, as you can see there, we're sitting right at 32-inches long. (measurer clicks) And then the height and the width will be the same, so an inch and three quarters. And then looking at the smaller piece, this is going to have the same length, so, again, 32-inches long.
And then the height is going to be right at about 1 9/16 inches tall. (rail clangs) And then the width we're lining up this way. Hopefully you can see that a little bit better. We're gonna be sitting pretty close to a little over an inch, about 1 1/8 inches wide. (measurer clicks) So both of these do feature a durable steel construction (knuckles tapping) with a textured powder coat finish that's going to help resist rust and corrosion.
This is going to be a pretty easy rivet-mount installation, but the rivets are not included, so that is something that you would have to pick up separately from this kit. Well, that's gonna wrap up our real quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Average Customer Rating: 4.9 out of 5 stars (56 Customer Reviews)
Build an RV sliding cargo tray with this trim kit, a rail kit (sold separately), and a plywood bottom (not included) to easily retrieve gear without crawling into your compartment. Included trim pieces prevent cargo from sliding off during travel.Exactly what I ordered and arrived on t ime.
I drive into the mountains, just a few miles from home, to photograph the night sky as often as I can. There are precious few clear nights and even fewer windless nights. So I have to set up a wind block pretty much every time I go out. To anchor it I carry about 170 pounds worth of tent pole weights and place them on studio light stands, from my portrait studio, around which I stretch a 10x20 foot muslin fabric.
The weights are contained in a box I built for them that sits in the back corner of the pickup bed. The problem was that the weights are difficult to lift in and out when I had to reach so far into the bed. I needed a way to slide the box out onto the tailgate but, of course it is too heavy to move.
In my search for a solution, I came across the “Rail Kit for Kwikee RV Storage Slide Out Tray Assembly 22” Long-200 lbs. from etrailer.com. George and Hally C. were quick to respond and easy to work with. I’m in the process of finishing it off with a slick plastic piece to support the box as it slides backwards. The slides themselves are heavy duty and very smooth in operation.
After 1 year installed in my motorhome this slide is solid. I have a heavy toolbox on it and it still works great. This is a well made product.
Always fast shipping and great prices. Stands behind there products
I purchased this rail kit because none of the prefab trays fit my RV. This kit was the closest thing to my 27" deep hold. The write up from the manufacturer did not have the detailed measurements to allow me to pre-design the tray, like minimum height for slides, dimensions including slide inside rail to outside. When I got the slides, the product info provided no additional information. After measuring those dimensions I was able to design a tray and install the completed cargo tray. The slides are heavy duty and work well. I have no concern about capacity. The 100% travel is nice since my tray overhangs front and rear. The Rails have to be installed 1 inch behind the closed door to allow for the latch handle. Now, if they only made one 48" deep.
It worked out great. Did a little modification so it would not go back inside when running the Jaws.
Excellent, still working 12/7 under heave abrasive conditions.
Will DEFINITELY us on our next project.
Great product and excellent customer se rvice!
Excellent communication and very positive person!
Good solid product and relatively easy to install. A couple of things to watch out for include, the height of the lip of the storage compartment. After installing mine, I found that the sliders were catching on the rubber seal of the compartment door. I had to uninstall everything and build a base that raised the sliders by an inch. The other problem I encountered was the locking mechanism, (located on the right slider) was catching on the power cables coming out of the side of the fridge. The locking mechanism is 'fixed' so I had to cut it off with a grinder and move it to the left slider. It would be advantageous if the lock could be easily moved without using a grinder! The pictures on this site show the lock on the right slider, but the installation instructions show it on the left slider. If there was an option to order either left or right when purchasing, I did not see it.
This is second set of tracks I’ve bought from e trailer. Service and product is outstanding. We use the tracks in our real estate Auction mobile office. They slide in an Ouch effortlessly I highly recommend this product
I think you need to start a military di scount
Installed in cargo area of Motorhome. Adding refrigerator and cabinet to create and outdoor kitchen.
I had to make some adjustments, but I was able to use your product to make my gen set slide in and out of my RV. This became very important because mice were chewing through my wiring. Now I can even run the get set in the out position. I can easily rewire any damage they cause. I can't tell you how much $ this has saved me. The first time I had damage, I had to take the unit out and take it to onen to fix for $ 2000. Hope this helps other people.
Just what I expected. Well built, high quality construction.
Definitely heavy duty for sure! I did not give it a five star review, because the handle will only lock in the closed position and not lock in open position, not clear why.
I’ve been looking for a storage slide system for quite a while. The size, weight rating works great for my CamperVan that I call the WanderWagon. Fast delivery, price, and high quality makes your company a “go to” source for me.
Ordering from etrailer online was easy and fast. e-mails keep me posted on the status and delivery was on time with no damage to the box or items.
I will order from them again.
This product will work great for the application I'm using it for.
The quality is exceptionally great.
Ording online with Etrailer was fast and convenient.
I haven't installed it yet but ordering and delivery was super fast. I currently have other things on order long before I ordered this item and I haven't received them yet. I have ordered several things in the past and I'm always satisfied.
Great product. We use them for Fridge/Freezer combo in the basement of our motor coach.
Good product and relatively easy to install. It is in a compartment that is under one of our slides and hard to access so this makes a difference.
Product is great, exactly as described, and exactly what I needed. Quick and easy shipping too!
I used this to mount my Dometic 75 CFX refer. worked out perfectly. The slide is high quality and easy to mount. I use 1/2" plywood for the deck. I highly recommend this slide.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.