To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation.
Features:
Specs:
Great product. I would give it 5 stars if it were easier to take on and off. It can't go through car washes, and there's a bit of measuring invoked to get it back on. That could and up being a hassle. Still from what I can see, it's the best product out there in it's price range.
Product arrived two days after I ordered it and it works perfectly!
Great design and exact instructions, i would recommend this product. etrailer was very nice to work with.
This rack worked well on my 2000 Toyota Tundra. I had racks on my camper shell but wanted an additional one on the cab. This worked just as I'd hoped...
these feet are awesome, they work really good
the bolts could be a bit longer, would make it easier to start the threads on the
locking knobs.
over all happy with the product.
thanks etrailer
Easy to install. Installed it with the wife in about 30 minutes. Using the Inno crossbars and bike racks.
This set-up fit my 2025 Honda CR-V perfectly. I was able to use my 20 yr old Thule square bars (79") which I have always used for hauling two side-by-side canoes. This saved me from replacing the perfectly good old bars.
They look good the only problem is that the brackets that grip the rail are too straight so that the pads do not meet the roof and they bend the crossbar
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
Perfect Fitment for my 2012 Ford Escape, etrailer.com's fitment guide was spot on.
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
Fit's the truck well.
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
This is an excellent product. Well made. However, it comes in 3 separate packages with instructions for each. That is because some of the parts are specific to fit your vehicle. In my case, I have a 2015 Acura TLX sedan. It is important to read the directions that come with all of the components. While some of the parts look similar, they are not and must be put in the right place. Once I figured that out, it came together nicely. Attached is a photo of how the whole thing looks on my car.
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
I have been very happy with the roof rack system.
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
Roof racks are very loud. Probably won’t keep them on all the time like I was planning. Shipping was very slow and took almost a month to get my order that was in stock. Overall the racks do what I need them to do.
Sticks too much, I wish they were more aerodynamic.
Jenny N.
6/6/2023
I was curious by what you mean that the roof rack sticks too much.
Kris
6/6/2023
Thank you for the follow up. Its the locking mechanism, it is sticking too much and its not as aerodynamic as others - see attached. Its prone to catch wind and make noise. Considering the price and that my teen would use it, its a good rack :-. Thank you for the great service! If you feel my review is misleading, feel free to not post it.
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Jenny N.
3/4/2022
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.
The Inno foot pack was a good fit for my vehicle and accepted my old Thule square bars.
Very satisfied with purchasing and installing. Sturdy equipment the website was easy to use prices and product clearly displayed. Delivered on time. I only give it four stars because I haven’t yet carried anything on any trips, but I feel confident It will do the job.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
7/25/2019
Per your photo, I can see you have the vehicle specific clips attached to holes in the roof rail. The clips are meant to install at the tops of the door jambs. Once correctly installed, everything should fit great for you.