Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the wheel net on your Roadmaster tow dolly (RM-2000-1 or RM-2050-1). Secures vehicle to tow dolly platform. Fits tires up to 30" in diameter and up to 11" tread width.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at this replacement tie-down strap for your Roadmaster tow dolly. This is for a quantity of one strap. Now, this part will replace the tie-down strap that's on your Roadmaster tow dolly. This does work on the tow dolly part numbers RM-2000-1 or the RM-2050-1.
Both of those tow dollies we sell separately on our website. This will let you replace one of the straps if it happens to be lost, torn or damaged. Basically, this tie-down strap will secure the vehicle to the tow dolly platform by holding down one tire and wheel. And two of these are required for one tow dolly. One over each tire and wheel.
This tie-down strap is designed to fit up to a 30 inch diameter by 11 inch wide tire. This demonstration, I happen to install it onto a 13 inch tire and wheel that has a 24 inch overall diameter and a seven inch width. It is for a quantity of one tie-down strap. It is made in the USA. And I did install it on here just to show you how you install it.
But basically, what you'll do is this end right here, you can see has a large hook on it. So, if I zoom in, you can see this large steel hook. And what's that's designed for is on your tow dolly, you'll have a bar that runs across and you'll hook this to that bar, so then as you tighten it, that'll hold in place. And then what you'll do is you'll notice there's a ratchet strap on this right here, or a ratchet that you'll crank it until it tightens the belt or the strap this way. And then on this end, you can see there's some extra length of strap.
This is what'll go into the ratchet that's on your tow dolly. Basically, the tow dolly, you'll have a ratchet on it. Again, just let me show you an insert. There's what the ratchet would look like and this strap installs in that. And that way, you can ratchet it down and it'll put the tension on it this way. This one will do it this way. And then this ratchet down here is what'll do it this way. Now, that ratchet, if that is missing, that comes with the tow dolly. That is not on there, and it is missing, and you do need the ratchet, we do also sell that part separately. It's part number RM-2110 and it's listed on this product page as a related product. If you notice, there's a length of strap hanging here that I tied up. Basically, that's for this strap here. And the reason we have a lot of extra is because this is a lot smaller tire and wheel. This strap, as we mentioned, will go up to a 30 inch diameter by 11 inch wide and it would use a lot of this strap. But because it's on the smaller size, you can see we have some extra there. But that should do it for the review on the replacement tie-down strap for the Roadmaster tow dolly..
Ratings & Reviews
Jenny N.
11/30/2022
When installing a wheel net like the Roadmaster, part # RM-2150, you will want to be aware of where the strap is located and make sure that it does not have any contact with anything but the tire and wheel. This should prevent the issue you had where the strap ended up being cut.
Do you have a question about this Car Tie Down Strap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Donald R.
7/18/2021
Two years of use, still like new, durable.