An auxiliary propane cylinder lets your motorhome stay supplied when you need more propane without moving the RV. This 48" pigtail connects the extra cylinder to a compatible system and restricts propane flow if the hose is damaged.
When you're staying in one place for a while, taking the motorhome to refill its onboard propane tank requires breaking camp. An auxiliary cylinder gives you another propane supply that you can remove and refill while the motorhome stays parked. This pigtail connects that cylinder to a compatible motorhome propane system.
A broken or damaged propane hose can release propane rapidly, creating a serious fire hazard. The 0.9 GPM excess-flow POL fitting restricts propane flow when its closing rate is exceeded.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steven here with etrailer. Let's take a look at the MEC 48" RV Propane Pigtail Hose. So folks, if you're using an auxiliary propane cylinder with your motorhome camper, this gives you some extra reach when that portable tank can't sit right next to the connection on your RV. And that could be especially useful during an extended stay. So instead of having to move the entire motorhome, camper, whatnot, when your onboard propane supply gets low, a compatible auxiliary setup lets you use that portable cylinder that's much easier to take in for a refill.
Now, the most important thing with any hose is that you make sure your connections on both ends match what you're trying to match it up with. So on this side, we have a male POL that's going to use a 7/8" nut. This threads directly into that internal POL connection on your propane tank and tightens with a wrench. And then you also have a 1/4" male inverted flare that's compatible with a female inverted flare. So make sure you're matching these up.
Now, as far as that male one, like I said, it goes into the propane tank itself. And as you can see on the right hand side, we've got some leak detection fluid, sold separately. I highly recommend you picking up a small jar of this. Basically, you twist off that silver cap. It has a brush applicator inside built into it.
You just wipe that on your fittings and then you make sure that everything's safe and secure that you have no leaks. Now this hose, again, is 48" long. As you can see, it's flexible. It is made from a thermal plastic, so it's fully crimped on the ends here with brass ferrules, so it is designed for high-pressure propane service and it is UL and all the certifications for safety that it needs to be both in the US and Canada. So again, folks, on this end, you don't have to use any kind of tape or anything because those flare fittings, they actually connect together at those flares.
So just make sure that you're double checking, again, all those connections before you make the purchase. Again, 48" long. We sell this in multiple lengths. You can check them all out separately here at etrailer. I'm Steven. Thanks for watching.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.










Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.