Replaces 1 of the plow feet on your Meyer M-9/M-10 snow plow. Heavy-duty steel shoe attaches to the bottom of your blade to raise it up so that you can plow over uneven ground, gravel, grass, or dirt. Includes multiple washers to adjust its height.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, This is Jeff at etrailer.com. Today I'm gonna take a look at this replacement plow shoe assembly for the Meyer M9 or M10 snowplow. Now this part here will replace one shoe assembly on your Meyer M9 or M10 snowplow. This is comparable to the Meyer part number 09592. Basically this is designed to mount to the bottom of your blade, so the cutting edge can safely travel over uneven surfaces. This will reduce wear and tear on the cutting edge to extend its life.
If you notice right here, it does include these 10 washers so that you can adjust the height of the shoe by putting as many washers as you need. And it does easily install and remove with this included linchpin right up here at the top. That's all included. This is constructed of a heavy duty steel for durability. It does resist corrosion with the black powder coat finish on it and it is made in the USA.
A few specs for this. The overall height from the very bottom to the very top is gonna be right at nine inches tall. The dimension on this shaft is one and a quarter inches. But that should do it for the review on the replacement plow shoe assembly for the Meyer M9 or M10 snow plow..
Ratings & Reviews
I was very impressed-- the product was exactly as advertised and of much better quality that what I had been using. Ordering process was easy and the order shipped as promised. I will eventually break something else on my plow and will look here first. Thank you.
Works as expected. A little pricy thou gh
Product was received promptly and works as expected. Close call in shipping, the box was ripped open, but the parts were there.
The skid shoes are great.Thanks
As advertised, one was lost during shipping and they replaced as soon as they could.
Although it hasn't snowed yet, I like my new shoes. Washers and keeper were included with each shoe, as shown. Note these shoes have the larger diameter (1.25") shaft, perfect for the Meyer I have.
Shipment was fast and painless. Thanks etrailer.com
The replacement shoes we received from you are very robust and just as good if not better than the originals that came with our snow plow. Thank you
I first would like to thank Angela for help in placing my order and answering my questions regarding the fit.
The item ordered was better than that which it replaced, nice !
I was impressed with how quickly my order arrived, a whole day early !
etrailer is a source for so many things, and I would recommend them to anyone.
I'am very pleased with my entire ordering experience !
Thank you !
I bought this to replace the shoes on my Landpride 3 point tractor blade. These are a great fit, it was very difficult to find heavy duty replacements. Landpride wanted +$300 for replacements. I have not used these yet, but they seem well made with plenty of spacers. I use these shoes when plowing gravel driveways with the blade so the gravel does not get scraped off with the snow.
I have successfully used these Snowplow Skid Shoe Assemblies on my JD5083E tractor's JD hydraulic swivel snowplow blade here on the ranch access road (12 miles of plowing each time out.) Skid shoes eventually wear down and will fail, but these replacement plow shoe assemblies (design and material) work very well on my JD hydraulic blade at lower cost and quick delivery from etrailer.com.
I bought a Detail K2 snow and I love it, but the skid shoes were very small and the shaft too short. I replaced them with these replacements. They were very easy to install and work great. Shaft has plenty of room and will not fall off like the original did.
Just what I needed… thanks!
Excellent product and service-shipping was very slow-in following the tracking it looked like the part criss crossed all over the midwest???????other than that,very satisfied!
Quick delivery, good price
Used on Land Pride snow plow, on which the stock shoes wore out in less than one winter. This shoe is solid cast steel and is holding up considerably better than stock shoes. Will reorder!
I have an older model Meyers plow and after looking at four locations locally (two snowplow dealers!) I had to order a part online. Joshua kept me up to date with tracking info on my plow shoe and it arrived timely JUST the afternoon before yet another corker of a VT snowstorm.
Fits perfectly, great product. Delivery on time.
High quality products at a reasonable p rice
Product was as depicted and sizing was accurate. Very pleased.
Just what I needed. Well built and great price.
Etrailer help put the last piece on my rebuilt meyers plow.
Worked as I hoped in my stone drive.
Thank you for your services.
Michael
Hard to find the correct shoe for my snow plow, these are well built and work well
these replacement shoes for my plow are a lot better than the 31/2" shoe that came with the plow.
much better support than the original ones.
Using this on a Curt straight plow attached to a Kubota RTV. It is much more sturdy than the factory supplied curt shoes.
Both Plow Shoes look Great! They look even Better installed. Thick steel with strong looking welds. They look even Stronger than the Factory Parts!! You guys are the Best with an Excellent Supply Store!!
Great Parts!! Consumer Priced!! Super Fast Delivery!!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.