Access Rockstar Mud Flap for Towing - Full Width - Commercial Grade

Video Transcript for Review of Access Mud Flaps - Custom Fit - A34FR62ZQ

Hi everyone. Steven here with etrailer. Today we're looking at our Access Rockstar mud flap for towing. It's gonna be a full-width commercial-grade mud flap. Now, this is a custom-fit application, so please make sure you're checking our fit guide at etrailer.com where it says My Vehicle information. Anything like your make or model, bed length, cap style, anything it asks you, to be sure you get in the right parts the very first time.

And again, this is a nice option for you. It's gonna protect and shield the towed vehicle, the towed trailer, or whatnot from debris, from rocks, those kind of things. I've got the brackets kind of loosely put up here. Always, always go off of the instructions. Don't go off of what you see here.

I could have potentially put these on backwards or something, who knows. So, just pointing that out there from the get go. Taking a closer look at this side, you can kind of see here where you have a cutout perforation. So, if you need more space for the muffler, you might have to just cut that out. They pre-cut most of it for you, making it super-simple.

And again, these brackets would be tight. Obviously, I have 'em kinda loose. But the idea is this part would be on the vehicle side. And when it's time to take the mud flaps off, you pull out the spring clip pin and then you would pull the mud flap off the vehicle. This part would stay on the vehicle.

And again, I may have this backwards, forward. Again, always go by what the instructions tell you and show you for your specific vehicle. This is just for a quick mock up, a quick look. And back here in the middle we have everything put together on the backside. You can actually, for the instructions, put all that stuff on the front side. So this bar, let me show you the thickness here, 3/8 of an inch, the manufacturer calls it I believe, 5/16. So again, you know, keep in mind rubber thickness. Sometimes it can be hard to measure precise, but I got about 3/8 of an inch. And as you can see, that black bar, there's two of 'em, they kind of meet here in the middle under my chin. And there's a long piece of heavy duty steel in there that, you know, crosses both sides to help reinforce that. And then of course you have them brackets on the backside. And again, you have another perforation on this side, the driver's side I believe, yeah, that you could potentially trim out if you so choose, if you need. And again, that black rod that I was just showing you on the backside, part of the instructions, you can put that on the front side if you want. Pull up to you, pull up to how you want it to look on your ride. And of course you got the four bolts and the two threaded keepers, that's gonna go on the vehicle. So again, no-drill installation, just a couple bolts on each side. You should probably have this put together and installed, oh, roughly 30 minutes. I think it took me about 15, 20 minutes to put this together, and a lot of that's just taking your time looking at the instructions more than actually, (chuckles) you know, threatening everything in. So, not too bad of a job overall. Overall length, I got 80 inches end to end. The tallest point that I could find was here on the mud flap down to the bottom, and I got 14-3/8 inches tall. Obviously it's different heights on other parts of it. I think this is gonna wrap up our quick look together folks at this Access Rockstar mud flap. As always, reach out to us here at etrailer.com if you have any further questions about this or any other of our great products. And have a great day.