Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Enclosed Trailer equipment racks feature a hook design at the top of the rack that allows them to hang from the metal frame runner at the top of the side walls on the trailer for added strength. They are predrilled so that they may be screwed securely to the wall. The unique and durable "Hammered" paint finish will last for many years.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our enclosed trailer, we're going to be installing the Rack 'Em single-hook rack for enclosed trailers, part number RA-8. You'll see here on our particular enclosed trailer, the wires run right across the top lip, where the single-hook rack would actually hang, so we've gone ahead and purchased a 2 x 6 x 8 board. We put an angle cut on the back side of it, where the hook will rest against it, as you can see here by our small demonstration piece. By doing this, it will allow you to move the hook the full length of the 2 x 6 x 8, as well as not damaging any of the wires that rest across the top lip of our trailer. Now we're ready to install our 2 x 6 x 8. We'll take our level first and get a nice straight line so that we put our board level. To do this, we use some wood screws, as well as a couple metal screws to tie into the framing of the trailer.
We also want to make sure that we scoot the board down far enough that we could take the hooks off and relocate them along the board if we so choose. Now that we have our board mounted up into place, now all we got left to do is set the single-hook rack on top of the board and put a screw in the hole in the location that we choose. As you can see, you can buy multiple single-hook racks, which will allow you to hang a variety of different items on the wall of your trailer. That will conclude our installation of the Rack 'Em single-hook rack for enclosed trailers, part number RA-8. .
Ratings & Reviews
Do you have a question about this Hose Hanger?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Creighton R.
4/14/2017
Very good. Sturdy, durable, well built.