Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This lightweight, 3-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. Front bike position can be easily removed if you only need to carry 2 bikes.
Features:
Specs:
Note: May interfere with bikes with front fenders.
The MonoRail has ratcheting hooks that grab your bikes firmly by the front wheel - not the frame. It's perfect for carrying carbon bikes or bikes with a custom paint job. To load a bike, simply place your front wheel in the cradle, rotate the arm up and over the wheel, and press down firmly on the ratcheting hook.
The rear wheel cradles accommodate a wide variety of bike wheelbases. They pivot front to back, adjusting automatically to each bike's wheelbase - no need for sliding and tightening. Secure the wheels in place with the built-in ratcheting strap. The straps also include extenders for use with fat bikes.
The front and back trays adjust 3" side-to-side to ensure you have enough space when loading your bikes. Just remove the bolts where the tray attaches to the bottom of the rack, slide the trays left or right to achieve the desired spacing, and then reinstall the bolts. This will prevent your bikes' handlebars from becoming tangled, and it eliminates bike-to-bike contact.
The front-mounted release lever allows you to easily tilt the MonoRail. The rack tilts down - with or without bikes loaded - so you can access your vehicle's rear cargo area. Because the tilt-release lever is located at the front of the rack, you don't have to worry about crawling through bikes or squeezing between the rack and the vehicle to pull it. When you raise the rack back up, you'll hear a click to indicate it's secure.
When the rack is unloaded you can pull the lever to fold it up for storage. This means you don't have to remove it to park in small lots at the trail head or in cramped parking garages.
It installs with a threaded, anti-rattle hitch pin. Simply slide the shank into your 2" hitch receiver, insert the threaded hitch pin, and tighten it down with the included tool. This will reduce noise and movement while the rack is installed.
Included locks secure your bikes to the rack and the rack to your vehicle. The integrated cable lock threads around your bikes' frames and inserts into the lock that slides along the cable.
The hitch lock simply snaps onto the hitch pin and locks in place. The cable and hitch lock are keyed alike, so you'll only need 1 key for both locks.
Average Customer Rating: 4.8 out of 5 stars (261 Customer Reviews)
This lightweight, 3-bike rack is perfect for carrying e-bikes, fat bikes, or bikes with a carbon frame or custom paint job. Front bike position can be easily removed if you only need to carry 2 bikes.This is a really well-made rack that much sturdier than my last hitch-mounted rack. My only concern, before purchasing, was whether or not the 3rd bike, because of its distance from the hitch, might put too much of a load on my suspension, but my 2020 Outback only squatted a 1/2" or less with all 3 bikes loaded. (Note: the bikes are roughly 30 pounds each. See pics.) I only wish that RockyMounts would have included better locks. I know that locks only keep casual thieves from stealing, but these are really, really cheap. This likely isn't as problematic for the hitch pin (which is hard to see/get to) as it certainly is for the locking cable pin--which is much more visible. Still, this one shortcoming aside, I'm very, very pleased with this purchase. Plus, and I know this might not be the best reason to buy the rack, but it looks really nice in the folded-up position. Finally, I really appreciated the wonderful videos and email answers provided by etrailer.com, which helped me understand the numerous racks and pick the one that best fits my needs.
Poor quality. It doesn't securely lock the screw bolt.
The nut which is attached in front tire guard is spinning with a screw bolt and it grinds it's hexagon shape hole.
Perfect for a small family and fat bike enthusiasts. One of the few models that fit fat tires and our budget. We've had other RockyMounts products and always liked them.
RockyMount makes a quality, full-featured bike rack at a very reasonable price.
Rack accommodates any size tire, carries 3 bikes (extender for third bike included, as shown), bikes lock down tight and don't move much on dirt roads, rack tilts up easily when not in use, and down when loaded in order to access trunk, comes with a detached cable that can be locked to the frame, and a keyed security nut that locks the rack to the hitch receiver.
I am very happy with this bike rack. It pairs very well with my Curt Trailer hitch and my 2016 Hyundai Tucson.
Great package from etrailer.com, and they were one of the more outstanding online retailers I've ever dealt with. They have my business now.
Robin C.
4/12/2019
Second mountain biking season and this rack is great. Figure Ill still be hauling our bikes on it in another 10 years. It will probably last longer than several cars! Thanks for your great service and really tight operation. My review and recommendations stand, 100.
We love the rack but when traveling we have to tighten the bolt that connects the extension to the existing rack. It comes loose
Really like this bile rack, it is easy to put on the hitch, hold the bikes secure and like the handle to raise the hitch up. Hitch had a cracked brace but call Rocky Mount and sent a replacement part.
Harley
5/25/2020
After a year still love this bike rack it is easy to install and like the way it hold the bikes
Awesome rack! No complaints whatsoever. I would have liked the rack to have integrated cable locks like the more expensive racks but I'm cheap and could not see spending more money for that feature. The cable lock that comes with this unit is very good for it's intended purpose. I transport two road bikes and two kids bikes with this rack. I worried alittle about the exhaust heat melting my carbon wheels but it has not been an issue as it seems the exhaust is not even close enough to do that. I have a Hyundai Palisade and a Chevy Silverado I use with this rack. Bikes are very secure and very little movement while secured in the rack. It might be a little heavy for some users but I'm 5' 8" and fairly strong for a 52 yr old. Rack was very easy to put together and I bought the 2 bike additional rack. I have a lot of confidence in this rack and am the type who is very conscious about whether a rack would compromise the condition and aesthetic of my bike or not. So, to sum it up I wanted a solid rack to transport my carbon fiber road bikes and my kids' bikes to various organized rides. I didn't want to give up my left arm to get it and I wanted to be easy to work with. This rack did all that and more.
This is the second hitch I have bought from Etrailer. Great prices, great products and free shipping! I received my 2" Draw-tite hitch for my 2020 VW Tiguan SEL R-line. The hitch fit perfectly with no real installation problems. If you have a Tiguan you may need to shave some of the undercoating near the bolts to make installation easier. I also only cut a 3" x 3" square for the hitch to fit through on the rear bottom valance. It's not necessary to cut a 3" x 6" rectangle. The 3" x 3" square makes a much better appearance. There are two plastic screws you can take out which will let you pull the valance down so the hitch can fit through.
I also purchased the 2" Rockymounts Monorail 3 bike hitch rack. Some assembly but took about 20 minutes. This is really a great hitch rack! Very well made and they supply all the locks etc. I like it much better than the older version of the Kuat Sherpa 1 1/4" hitch rack that I had.
If you need a hitch or a bike rack look no further than Etrailer!
This is very solid, no rattling. It's very easy to mount the bikes too. With a bike only in the second rack the tailgate on our X1 opens.
So far so good! I haven't loaded bikes yet but it is put together and on the car! I won't be storing it on my car because my backup camera beeps nonstop with it attached to the car.
This bike rack is the easiest to load and unload bikes that I have ever used. I highly recommend!
Very solid rack. I like it better than Yakima, Thule and Kuat. It works great and was super easy to install.
I have only had this product for a few weeks, but have used it about 4 or 5 times. So far it has worked really well. It feels sturdy and the bikes are very easy to get on and off.
Everything seems good except price is high like every other rack, but paint seems soft. We'll see if it rusts.
At age 75, I have purchased many bike racks over the years…..this one has no equal in loading and unloading…
This thing is rock solid. Once I figured out the directions and put it on my 2020 Jeep Grand Cherokee is was so impressed with how stable it was. With two hybrid bikes on the platform rack it didn't even wiggle in the slightest! The only negative comment I can make was in lack of information in the directions. I had the platforms backwards and didn't know it until I tried to fold the rack completely up. I reviewed the directions again and no mention or illustration is available. However the fix wasn't that hard and it now functions exactly like the videos. Customer service from etrailer was remarkable though both times I called I thought the wait time was a little long. I would recommend this product and this retailer to anyone. Great service, great product!
It was very easy to assemble the MonoRail 2. All of the parts were in the box and nothing was damaged. I would recommend etrailer to purchase from as they were the only ones to have this bike rack. Also I would recommend the MonoRail as well.
Do you have a question about this Hitch Bike Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
9/24/2021
This defect is covered under warranty. Please contact the manufacturer at 1-303-402-0190.