bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 5000 lbs GTW
  6. Concealed Cross Tube
THIS ITEM IS NOT A FIT FOR
1999 Chevrolet Astro
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 75236
In Stock
$154.56
Retail:$225.95
You Save: $71.39
Trailer Hitch
Not Confirmed to Fit

1999 Chevrolet Astro

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75236 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (366)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 75236

  • Class III
  • 2 Inch Hitch
  • 5000 lbs GTW
  • Concealed Cross Tube
  • 500 lbs TW
  • Draw-Tite
  • 5500 lbs WD GTW
  • For Towing
  • 550 lbs WD TW

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 5,000 lbs
      • Maximum GTW when used with weight distribution: 5,500 lbs
    • Maximum tongue weight: 500 lbs
      • Maximum TW when used with weight distribution: 550 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75236 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87581 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75236 Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,500 lbs.

Tongue Weight (TW):
550 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Bumper brackets will need to be loosened and bumper supported during hitch installation. No drilling through vehicle frame required for installation , Hitch does not fit vehicles with a factory installed hitch



California residents: click here


Customer Satisfaction Score:

Ratings & Reviews

4.8

373 reviews
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:

East to install.Looks good.



by:

Excellent quality, good service, arrived in just two days. Perfect fit, we are extremely pleased with the quality of this hidden hitch.



by:

Not happy with the fit. The socket is about 2 inches below the bumper. The Toyota ones fit better. Not that easy to put on.I would not call it a hidden hitch.



by:

Hidden Hitch arrived in excellent condition. It took longer than 1/2 hour to install, but my buddy and I decided not to take the bumper off my 2005 Toyota Tacoma, but to just rather loosen those bolts holding the bumper to the frame. Harder to install the Hidden Hitch this way, but easier for us in the long run.



by:

hidden hitch, toyota wiring harness and flat four bracket. Products got here quickly and after watching the videos and reading instructions we were able to install all the products with ease on my 2012 Toyota Tacoma.



by:

Installed on a 2009 Toyota Tacoma Access Cab, SR5, V6, 4WD.

I received my Hidden Hitch 5 business days after I ordered. Very fast in my book. The directions were very clear and the hitch was very easy to install. I did the install by myself, so it took be about 15-20 minutes longer than the 40ish the directions said. The hardest part was sliding the hitch up between the loosened bumper bracket and the frame. I had to hold it up in one arm and position and tighten the bolts with the other. No drilling required.

The hitch itself is amazing looking. I actually had U-Haul install a hitch for me, then I had them un-install it and refund my money. They told me it was going to be hidden but it wasn't at all. The entire lower cross bar was visible under the bumper. With this hitch I have to bend down and only then can I see the very bottom edge of the cross bar.

It arrived in pretty good shape. One corner of the hitch had punctured the cardboard box and scraped some of the paint off on one of the edges. I'm not worried about it but some foam in the box might prevent this from happening again.

I'm very happy with the quality and with e-trailer. They upgraded my shipping for free and have had excellent email communication from the get go. Good job!! I will definitely use e-trailer again!!



by:

I was able to install this with the help of my 12 year old son with ease. The fit and finish are perfect, and the video made the included written instructions unnecessary.

The only thing I forgot to order was the: Mounting Bracket for 4 Way Flat Connectors, (http://www.etrailer.com/p-18144.html) to complete the overall installation of the wiring harness and make the entire job complete.

I would not hesitate to recommend the Hidden Hitch and etrailer to a friend.



by:

The hitch was installed with out any problems.



by:
2011 Toyota Tacoma

Great product for our brand new 2011 Toyota Tacoma. Worked perfectly.



by:

Was easy to install and a perfect fit. Looks very good on my truck.



by:

Easy to install, but you really need 2 people. Took about 30 minutes. The hitch is truly hidden. Very satisfied.



by:

Speed of delivery exceeded my expectations. Product fit perfect. My son will tow a boat this weekend.



by:

Product arrived in good shape and installation was exactly like the video. No issues. The video was very helpfull.



by:

Hitch arrived on time, installation was easy. I'm vrey pleased.



by:
2011 Toyota Tacoma

Received the Hitch in four days, was easy to install and took about
90 minutes.



by:
2012 Toyota Tacoma

Probably will be an excellent rating upon install!
Everything arrived as expected and I'm very happy with the speed of shipment. Nice quality too.



by:

Well made...good lookingInstallation was straight forward. I am well pleased with the quality.



by:

Super-fast shipping and delivery. I installed the hitch myself in about 30 minutes thanks to the clear instructions that were included. Great product and great service!



by:
2007 Toyota Tacoma

Hitch for 2007 Tacoma D-cabStrong and well made, installation took several hours but well worth the time. This was due to re-aligning the bumber after loosening the bolts as required. Well designed and barely seen from behind truck.



by:
2007 Toyota Tacoma

The installation was easy and fast. The shipping was much faster than I expected. This product will work well for my needs.



by:
2012 Toyota Tacoma

This product was delivered promptly and I was pleased with the quality and instructions for installation. Great product!



by:
2012 Toyota Tacoma

I decided to order Draw-Tite hitch for my new Tacoma from etrialer.com because of the price (and I did price three other web sites). etrailer.com email me the progress on this order when it was ship and with it was delivered. I highly recommend etrailer.com for all your truck needs.



by:

I can't say much for the hitch itself, as I haven't used it to tow anything just yet. But the installation was easy enough, and the video from etrailer.com was very helpful!



by:

Excellent web site with accurate info..Fast shipping and easy install with everything fitting perfect..Would highly recommend..



by:
Toyota Tacoma

Happy with Draw-Tite hitch!This hitch installed perfectly on my Tacoma. The directions were easy to follow. I'm very happy with the Draw-Tite hitch. It's well hidden behind the bumper.
Thanks!


25
373
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Trailer Hitch Recommendation for 2014 Toyota Tacoma
    Both the Curt Class III Trailer Hitch # 13323 and the Draw-Tite Class III Trailer Hitch # 75236 would work well for you. These Class III trailer hitches have a 2 inch receiver, 5,000 pound max towing weight and 500 pound max tongue weight. For installation, both hitches require the bumper brackets to be loosed or removed. I would go with the Curt trailer hitch, as it is more economically friendly than Draw-Tite. The trailer hitch will bolt into existing weld nuts on your truck's frame....
    view full answer...
  • Does Trailer Hitch that Fits Hyundai Tucson also Fit Kia Sportage
    Hey Russell, it does look like you ordered the Draw Tite part # 75236 from us but it's actually for 2005-2015 Toyota Tacomas so what I think you are referring to is the Curt # C94WR that you ordered that does fit: 2023 - 2025 Kia Sportage 2022 - 2025 Hyundai Tucson Does that sound right? If you want replacement hardware for either hitch what you need is the part # RHK.
    view full answer...
  • Recommended Ball Mount For 2018 Forest River Wolf Pup 18to Travel Trailer
    For your 2018 Forest River Wolf Pup 18to travel trailer, I recommend the B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10037B. This ball mount will give you the adjustability to tow your travel trailer level and will give you two hitch ball size options that are integrated. You will have a 2 inch option and a 2-5/16 inch diameter option, one of which will fit your trailer. Another really nice feature of this ball mount is the stowable feature. When...
    view full answer...
  • What is the Towing Capacity of 2013 Toyota Tacoma TRD and Hitch Recommendation
    I looked up your 2013 Toyota Tacoma TRD Sport and everything I found says that you have a 6,400 lb towing capacity. That would be more than enough for your 1984 Stingray that weighs 2,050 lbs. If you were in need of a trailer hitch the Draw Tite hitch part # 75236 is a confirmed fit. It's capacities are lower though at 5,000 lbs total trailer weight. For wiring you would then want the part # 118496. If you wanted to do some towing you might be interested in etrailer ball mount kit #...
    view full answer...
  • Lightweight Trailer Hitch for 2015 Toyota Tacoma
    Hey John! All of the hitches for your 2015 Tacoma weigh approximately 38 lbs so there isn't one that stands out over the others in terms of weight. Personally, I recommend the etrailer # e98850. The our hitch has a unique matte black finish so it looks sharp and does a better job hiding dirt and scratches. Keep in mind, all of the available aftermarket hitches are designed for a Tacoma that does NOT have a factory installed hitch. If you need anything else feel free to reach out in the...
    view full answer...
  • Is There Replacement Hardware for 2012 Toyota Tacoma Pro Series Trailer Hitch?
    Hey Todd, thanks for reaching out! The Pro Series brand of hitches is no longer made, but you should be able to use the hardware for the Draw-Tite # 75236 as a substitute. Just order part # RHK and input the Draw-Tite part number and we can send out the hardware you need. Normally we don't recommend mixing brands and hardware, but the Pro Series and Draw-Tite brand names have the same parent company so they are essentially the same hitch. If you'd rather start from scratch and get a...
    view full answer...
  • Width of Trailer Hitch Receivers for 2005 Toyota Tacoma
    There are three trailer hitch receivers that are fits for a 2005 Toyota Tacoma, and according to the manufacturers, from outside-to-outside at the widest points the hitches were approximately 38-1/2 inches wide. That would be the part of the hitch that attaches to the outside of the frame rail, but as you can see from the cut out of the installation instructions, there is a flange on the inside which is about 1/2 inch from the sides. I believe this may be what you were referring to by...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement Trailer Hitch Receiver For A 2008 Toyota Tacoma
    The only compatible Draw-Tite trailer hitch receiver for a 2008 Toyota Tacoma is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236, which excludes X-Runner models. If you have a regular Tacoma then you'd be fine using that hitch. If you do have an X-Runner model then I'd recommend going with the etrailer Trailer Hitch Receiver # e98850, which is a fit for both the X-Runner and regular models. I also prefer the matte black paint of this hitch over the high gloss of the # 75236 since...
    view full answer...
  • Comparing Draw Tite and Curt Hitch for 2006 Toyota Tacoma
    Between the Draw Tite # 75236 and the Curt # 13323 there isn't a significant difference in ground clearance. They both fit right up to the bottom of the rear bumper. Overall I would go with the Curt though. We have found that typically the quality control is a bit tighter on the Curt hitches and the powdercoat is a little more resilient.
    view full answer...
  • Differences Between Curt # 13323 and Draw-Tite # 75236 Class III Hitches for 2009 Toyota Tacoma
    The Curt # 13323 and the Draw-Tite # 75236 Class III hitches share the same weight capacity and installation procedure. The appearance and design of the two hitches are pretty similar. As far as quality goes, both brands are about equal. Given this, there's no reason why you couldn't go with the less expensive Curt model. If you were planning on towing with your Tacoma, you might also need the following: Trailer wiring harness, part # 118496 Ball mount, part # D-4 Hitch Pin and Clip,...
    view full answer...
  • Determining if Hitch of 2012 Toyota Tacoma is OEM for Picking Out Replacement
    You'll have to get underneath the rear of the truck and look at how the hitch is attached to the rear truck frame. If it's bolted to the frame then it's aftermarket and a hitch like the Draw Tite # 75236 could fit and work great. If instead it's welded to the rear bumper beam or frame it would be an OEM hitch.
    view full answer...
  • Plug-In 5-Way Trailer Connector For 2010 Toyota Tacoma Without Factory Tow Package
    There is indeed a plug-in 5-way trailer connector that will fit your 2010 Toyota Tacoma with the factory tow package, and will work with your LED taillights; the correct part is a harness from Curt: - Curt T-Connector Vehicle Wiring Harness with 5-Pole Flat Trailer Connector # C56513 This will be exactly what you need for your '10 Tacoma to tow your bass boat with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236.
    view full answer...
  • Width of Trailer Hitch for 2006 Toyota Tacoma
    I reached out to the manufacturer who told me the etrailer.com Trailer Hitch Receiver # E98850 was tapered at the brackets but at its widest point was approximately 38-1/2 inches. The same is true of the Curt Trailer Hitch Receiver # 13323. Both of these hitches fit a 2006 Toyota Tacoma, as will the Draw-Tite Trailer Hitch # 75236. I have added links to videos of both the Curt and Draw-Tite hitch being installed on an '06 Tacoma. Additionally, if you are looking to tow with this truck...
    view full answer...
  • How Much Can a 2014 Toyota Tacoma Tow with the Bumper
    The towing capacity of the bumper on your 2014 Toyota Tacoma assuming you have the cutout will vary from 3,300 - 3,500 lbs depending on options. I advise you to take a look starting at page 228 of your owner's manual to see these options. Therefore, so long as your jon boat does not exceed the above then you will be good to go. If you need a hitch ball, I recommend the Hitch Ball part # C40017 for 1-7/8" or part # C40020 for 2" so long as you have a 1" diameter ball hole. If your jon...
    view full answer...
    Image 1 for
  • Brake Controller and Trailer Hitch Recommendation for 2008 Toyota Tacoma
    For your 2008 Toyota Tacoma that does not have any trailer wiring you would need to first need to start with a 4-way trailer connector. For that you would want the part # 118496. I attached an install video for this as well. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2011 Toyota Tacoma
    Starting with the trailer hitch, the Draw-Tite Max-Frame Trailer Hitch Receiver # 75236 referenced in your question will indeed fit your 2011 Toyota Tacoma PreRunner and is the exact hitch I would recommend. This Class III trailer hitch will use existing holes in the truck's frame for a no-drill installation. It will provide a 2 inch receiver opening and a 5,000 pound towing capacity, although I also recommend checking the towing capacity of the truck itself. This information will be listed...
    view full answer...
  • Trailer Hitch and Wiring for a 2003 Toyota Tacoma
    The 2003 Toyota Tacoma and the 2011 Toyota Tacoma require different hitches so you would not be able to swap one hitch between the 2 years. For your 2003 Toyota Tacoma I recommend Curt hitch # 13013. This is a Class III hitch rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. When used with weight distribution it is rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. I have linked a video showing installation of this hitch for you. If you plan...
    view full answer...
  • Trailer Hitch Recommendation for 2008 Toyota Tacoma with 5k Capacity
    If your owners manual states you can tow up to 5,000 lbs with a Class III hitch installed the Draw Tite part # 75236 would be exactly what you need to tow more than 3,500 lbs. This hitch can safely tow up to 5,000 lbs and as long as your owners manual says the same with a hitch like this installed you'd be good.
    view full answer...
  • Will Curt Bumper Mount Trailer Hitch # E-3S Fit a 2007 Toyota Tacoma Bumper
    The Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2007 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. I am...
    view full answer...
    Image 1 for
  • Will Swagman Semi Trailer Hitch Mount Bike Rack Fit a 2006 Toyota Tacoma
    The trailer hitch you mentioned, 51146, has the same pin hole to rear bumper measurements as Draw-Tite hitch # 75236. When we installed the hitch on a 2007 Toyota Tacoma the bumper clearance measurement was 4 inches from the center of the hitch pin hole. It will be very close to that on your 2006 Tacoma with hitch 51146 installed. On the Swagman Semi, # S64686, it measures 12 inches from the center of the hitch pin hole to the nearest part of the carrier when in the down position. When...
    view full answer...
  • Will Draw Tite QSP Anti-Rattle Device Fit a 2007 Toyota Tacoma
    If the hitch you have installed on your 2007 Toyota Tacoma is the Draw Tite Hitch part # 75236 then yes the Draw-Tite QSP Trailer Hitch Silencer # 63080 will fit it and work well. This anti-rattle device only fits Draw Tite hitches though so you would have to have the mentioned Draw Tite.
    view full answer...
  • Hitch Recommendation for a 2013 Toyota Tacoma
    The Curt Bumper Hitch, part # E-3S, is made to attach to a truck step bumper. It is a universal fit design so it is not listed for a specific vehicle. The mounting holes are 8-1/2 inches center to center between the holes. If your 2013 Toyota Tacoma has a step bumper and has mounting holes with the 8-1/2 inch dimension then it will bolt to your bumper. If you do not have holes that will line up with the hitch then you can still use the hitch but you would have to drill new holes. I am...
    view full answer...
    Image 1 for
  • Recommended Hitch for 2008 Toyota Tacoma That Would Require No Modifications to Vehicle
    The Draw-Tite Max Frame Class III Receiver Hitch, part # 75236 will fit your 2008 Tacoma as long as the Tacoma is not the X-Runner model. If your Tacoma is the X-Runner Model, you would want to use the Curt Class III Receiver Hitch, part # 13323. Neither the Curt or the Draw-Tite model would require any modifications to the vehicle.
    view full answer...
  • Hitch That Fits 2010 Toyota Tacoma
    There are hitches which are going to fit your 2010 Toyota Tacoma, though the # 13013 is not one of them. I recommend the Draw-Tite # 75236 due to the install process being a bit easier than that of its Curt counterpart; this hitch fits all 2010 Tacoma's with the exception of the X-Runner. I've attached a link to a video review for you to take a look at as well.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Alan C
Video by:
Alan C
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<